Latest furbishing work Tenders | Government furbishing work Tenders

CTN :41037001

25 Jul, 2025 83.87 Lacs

Chittoor - Andhra Pradesh

Tender For supply, installation, testing and commissioning of 500 kva distribution transformer with allied equipment, ht/ lt cables, panel boards etc., for providing power supply to new donor rest houses constructing in tbc area at tirumala

CTN :41037857

22 Jul, 2025 9.18 Crore

Gopalganj - Bihar

Tender For mgsy/25-26/gopalganj-1 /01 - high level bridge across river on barai patti to niranjana janewali path me dhawast screw pipe pul ke asthan par new pul nirman in block - gopalganj , rwd division gopalganj-1 , district - gopalganj , bihar, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity b) lateral load test, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(extra pile length). stripping off rcc m35 in the pile up to cut off level and disposal of debris with all leads and lifts., sand filling in foundation trenches as per drawing & technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design beyond 5 m and upto 10m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to th

CTN :41037856

22 Jul, 2025 7.68 Crore

Jhajha - Bihar

Tender For mgsy/25-26/jhajha/01 - construction of rcc hl bridge on kiyajori se maharaidih, foundation, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap.ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 30 in pile foundation complete as per dwg & tech specification.pile cap in rcc m-30, bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m.ii. 1200 mm dia, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.00 for each island.), providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total) ., substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specificationi) upto 5m height (using concrete mixer), ii) from 5m upto 10m height (using concrete mixer), r.c.c. grade m-35 in substructure complete as per dwg & tech specificationii) from 5m upto 10m height (using concrete mixer), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5ii. rcc m-30, supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical specification clauses 1002, 1010 & 1202, providing and laying cement con

CTN :41037837

22 Jul, 2025 15.13 Crore

Bhabhua - Bihar

Tender For mgsy/25-26/bhabhua/01 - name of work: construction of proposed hl rcc bridge on durgawati river at swar gadh of rampur block in the dist-kaimur(bhabhua), length- 111.60mfoundationexcavation for structuresearthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap.ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 35 in pile foundation complete as per dwg & tech specification.pile cap in rcc m-35 (using batching plant, transit mixer and concrete pump), bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m.ii. 1200 mm dia (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.00 for each island.), carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of loada) initial load test on test pile for 2.5 times the design load specified in drawings1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total) ., substructurer.c.c. grade m-30 in substructure complete as per dwg & tech specificationrcc m-30 (using batching plant, transit mixer and concrete pump)i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructureproviding and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5ii. rcc m-30 (using batching plant, transit mixer and concrete pump), supplying, fitting and p

CTN :41037847

22 Jul, 2025 12.35 Crore

Begusarai - Bihar

Tender For mgsy/25-26/begusarai/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in between mathar kasimpur kurmi tola road and gupta lakhminiya rcd road under matihani block in the district of begusarai ., excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. co

CTN :41037852

22 Jul, 2025 13.59 Crore

Araria - Bihar

Tender For mgsy/25-26/araria/02 - construction of rcc h.l. bridge in pagal chauk se kesa tola chainage 2.200 km par pul nirman karya, h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i. ordinary soil, i) upto 3m depth, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth, providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification, well curb(iv) rcc m-35 gradecase-i : with batching plant, transit mixer and concrete pump, well steining(vii) rcc m-30 gradecase-i : with batching plant and concrete pump, bottom plug(i) pcc grade m-20case-i : with batching plant and concrete pump, top plug(ii) pcc grade m-20case-i : with batching plant and concrete pump, well cap(ii) rcc grade m-30case-i : with batching plant, transit mixer and concrete pump, sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 20% of cost for kentledge including supports, loading arrangement and labour., sinking of 7 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 7.5% for every additional meter depth of sinking over the rate of sinking for the previous meter, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, rcc m-30, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, rcc m-35 (using batching plant, transit mixer and concrete pump), i) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the struct

CTN :41037845

22 Jul, 2025 13.50 Crore

Araria - Bihar

Tender For mgsy/25-26/araria/01 - panchayat pipra vijayavar nuna nadi me high level rcc pul ka nirman karya, h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i) upto 3m depth, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth, providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification, well curb(iv) rcc m-35 gradecase-i : with batching plant, transit mixer and concrete pump, well steining(vii) rcc m-30 gradecase-i : with batching plant and concrete pump, bottom plug(i) pcc grade m-20case-i : with batching plant and concrete pump, top plug(ii) pcc grade m-20case-i : with batching plant and concrete pump, well cap(ii) rcc grade m-30case-i : with batching plant, transit mixer and concrete pump, sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 20% of cost for kentledge including supports, loading arrangement and labour., sinking of 7 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 7.5% for every additional meter depth of sinking over the rate of sinking for the previous meter, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, i) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709

CTN :41037854

22 Jul, 2025 9.00 Crore

Patna - Bihar

Tender For mgsy/25-26/teghra/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in alapur to pasopur & l021 to pakthaul , ( khijir chak abm kirtoul ke bich balan nadi par pul ) under teghra block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., levelling course for pile cap , providing and laying of pcc m15 levelling course 100mm thick below the pile cap., providing and laying reinforced cement concrete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 , rcc grade m -35 in pile cap, bored cast in situ piles r.c.c m-35 , pile excluding reinforcement complete as per drawing and technical specification and removal of excavated earth with all lift and lead up to 1200 m, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 54.273+16.411+74.929+ 29.651= 175.264, 6mm thick. steel liner as per drawing and technical specification ., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well. assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 3768.00 for each island., pile load test on single vertical pile in accordance with is:2911(part-iv) 1985, a) initial load test @ 2.5 times load on 1 pile, b) routine load test @ 1.5 times load on 2% pile, c) lateral load test, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf qty = 20.810+28.454+1.762+0.313+1.289+1.139 =53.77, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed cement concrete in super-structure as per drawing and technical specificatio,rcc grade m 30, height 5m to 10m, reinforeced cement concrete m30 grade approach slab including reinforcement and formwork complete as per drawing and technical specification, pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, construction of rcc railing of m30 grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space b

State Government

CTN :41023793

21 Jul, 2025 5.04 Lacs

Ahmedabad - Gujarat

Tender For special repair to city civil and sessions court, bhadra, ahmedabad. (constructing mediation centre chambers at room no. 627 at 6th floor and other places-aluminum section office partition work, flooring work and other miscellaneous works)

State Government

CTN :41078417

24 Jul, 2025 21.66 Lacs

Naswadi - Gujarat

Tender For constructing panchayat ghar cum mantri awas at sankal (p) village of naswadi taluka dist: chhotaudepur under c.d.p.-5 depoisite work 2022-23 (7th attempt)

Furbishing Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government