Latest fuse alarm machine Tenders | Government fuse alarm machine Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45450535

22 Jun, 2026 25.00 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : name of the work / . contract no: - scope of work/technical specifications etc.1. up keeping, cleaning work of 88.8 sqm area (22.20 sqm area/day/machine) of machine housing, operator cabin, undercarriage track chain and rollers mud etc. of 04 nos. hydraulic shovels (be700, tata hitachi zx650h sl no.001166 and pc2000-8 sl no.1 & 2) working at khadia project for a period of 365days.2. material handling of lubricants barrels, loading and unloading of 04 nos. hydraulic shovels (be700, tata hitachi zx650h sl no.001166 and pc2000-8 sl no.1 & 2) and 02 nos. surface miners working at khadia project for a period of 365days. 3. assistance in repair and maintenance work in all the three shifts including general shift of 02 nos. surface miners, running under marc. note: maximum deployment of manpower for the above scope of work likely to be 1. semi-skilled for 730 nos. of manshift & un-skilled for 2555 nos. of manshifts.standard terms & conditions- all the safety materials (safety helmet, safety shoes, gloves and other safety equipment s) are to be provided / arranged by the contractor., labour charges for material handling & cleaning works of hydraulic shovels and surface miners as per scope of work including contractor profit., labour charges for assstance in maintenance and repair work of 02 nos surface miners running under marc including contractor profit., total impact of gst for the purpose of ctc

State Government

CTN :45601769

29 Jun, 2026 NA

Amroha - Uttar Pradesh

Tender For providing of tentage service lumpsum based - social gatherings; lighting, tent rentals, furniture & equipment rentals, logistics & delivery, power supply, maintenance & support, safety measures

State Government

CTN :45609258

29 Jun, 2026 NA

Shamli - Uttar Pradesh

Tender For providing of tentage service lumpsum based - social gatherings; floorings, lighting, air conditioning, tent rentals, furniture & equipment rentals, climate control, power supply, logistics & delivery, safety measures, dismantling and removal

CTN :45599528

09 Jul, 2026 17.00 Lacs

Multi City - Telangana

Tender For supply and fitment of laminated safety glass of 6mm thickness with new rubber beading for operator cabins of shovels, drills, cranes and other supporting equipment working at s and d, ocp3, rg2 for a period of two years.

CTN :45281561

20 Jun, 2026 59.46 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For bid to ras tender for supply of fixing self regulating heat tape cable insulation and accessories in ppr pipe - providing and fixing self regulating heat tape resistance heating cable suitable to protect freezing of water in pipelines having rated output of 35 w per meter at 220 v ac supply the heating cable shall have capabibility to automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating the cable should be suitable for continuous operation in outdoor in adverse climatic conditions flexible for installation around pipelines joints and valves and compatible with temperature controller systems , providing m20 3 pin connector suitable for making secure electrical joints between self regulating heat cable terminals designed for reliable power and signal continuity the connector should be operable for operation at rated 220 v ac supply and compatible with heating cables of specified capacity must l ensure safe and firm termination with robust insulation to prevent moisture ingress short circuits and electrical leakage the connector shall be made up from high-quality weather resistant materials suitable for continuous outdoor operation under adverse environmental conditions it should be ease in installation with a compact and durable design for use in pipeline joints terminations and interconnections the connector should be compatible with temperature control systems and associated accessories ensuring long term performance safety and protection against overheating corrosion and mechanical stress , providing temperature differential controller with auto and manual operation housed in a robust ip65 rated enclosure suitable for controlling heat tracing systems to prevent freezing of water in pipelines and utilities the controller should be capable to automatically switch the heat tape on off based on preset temperature differentials ensuring optimal performance and energy efficiency the controller should have in built safety features such as overrun protection and burn out protection to safeguard the heating cable and associated equipment from damage the enclosure shall be weatherproof and suitable for outdoor installation offering protection against dust and water ingress and ensuring reliable long term operation under harsh environmental conditions , providing pt100 temperature sensors with 10 metre cable suitable for accurate temperature measurement and control in heat tracing and pipeline monitoring applications the sensors should be made up of platinum resistance type pt100 ensuring high precision stability and reliability over a wide temperature range the wire with sensor should have high quality insulation suitable for reliable signal transmission and compatible with temperature controllers and monitoring systems the cable shall be durable flexible and suitable for installation in outdoor under extreame weather conditions in high altitude area , providing 3 core 1.5 sq mm pvc insulated and pvc round sheathed multicore flexible cable comprising bright annealed bare copper conductors suitable for heavy duty industrial applications rated for voltage grade up to 1100 volts the cable shall confirm to requirements of is 694 2010 the conductors shall be made of high-conductivity annealed copper ensuring efficient current carrying capacity and minimal losses each core shall be uniformly insulated with high-quality pvc compound and the overall cable shall be protected with a durable pvc outer sheath providing resistance against moisture abrasion and mechanical stresses the cable shall be flexible in nature allowing ease of installation in confined and complex routing conditions it should be suitable for continuous operation in indoor and outdoor adverse environments offering reliable performance electrical safety and long service life

CTN :45575174

01 Jul, 2026 2.20 Lacs

Coimbatore - Tamil Nadu

Tender For supply of lab equipments for fire technology and safety engg. dept. - list of items:supply oflab equipments (for specification details refer notice inviting tender), respiratory protection equipment (detailed specification enclosed), hand skin protection equipment(chemical resistant gloves)(detailed specification enclosed), eye protection equipment(safety goggles) (detailed specification enclosed), protective clothing (lab coats demonstration purpose) (detailed specification enclosed), multi gas detector (detailed specification enclosed), chemical safety and eye wash shower (detailed specification enclosed), eye wash cup (detailed specification enclosed), friction sensitiveness tester (detailed specification enclosed), first aid box (detailed specification enclosed), first aid dressing kit bandages andslings (detailed specification enclosed), first aid blanket / emergencyblanket (detailed specification enclosed), patient transport chair (detailed specification enclosed), cpr training manikin (adult) (detailed specification enclosed), personal protective equipments (detailed specification enclosed), respiratory ppe (detailed specification enclosed), scba self contained breathingapparatus (detailed specification enclosed), safety harness (full body harness) (detailed specification enclosed)

CTN :45593148

27 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of testing of earth pit , testing of relay , thermography of equipment , preparation of earth pit layout , testing of insulation mat , load testing of battery bank , transformer oil testing , testing of transformer tan delta , testing of transformer partial discharge , routine testing of transformer , servicing and testing of vcb , wti winding temperature indicator calibration , oti oil temperature indicator calibration , buchholz relay testing , testing of third harmonic la , testing of vcb bottle , vlf testing of cable 100 percent , polarization index testing motor , insulation resistance testing , electrical safety audit , calibration of voltmeter , calibration of ammeter , cablibration of energy meter , cablibration of power factor meter , acb servicing and testing , pair of ht electrical gloves, 25 kv, is 13774 2021 , pair of lt electrical gloves, 1.1 kv, is 4770 1991 , insulation mat 2.5 mm, lt, is 15652 , insulation mat 3 mm, ht, is 15652 , oltc oil testing as per is 1866 , dga of transformer oil , transformer oil filtration , thermal omicron b2hv relay test , testing of mccb , testing of rccb , pi of power cables , current transformer testing , digital megger meter , led 300 watts for high mast tower , digital ampere meter , communication cable tester , digital clamp meter * /bid number : gem/2026/b/7664367 + /dated: 17-06-2026 ' ' / bid document 1 / 51

Central Government And Public Sector

CTN :45591734

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: back side of 132 kva electric tower no. 02, north-south 42 feet along 20 feet kacchi road and east-west 52 feet.

Central Government And Public Sector

CTN :45591735

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: in front of oxygen plant 32 feet east-west along pcc road and north-south 80 feet.

Fuse Alarm Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

Central Government And Public Sector

Central Government And Public Sector