Latest fusing machine Tenders | Government fusing machine Tenders

CTN :45066705

29 May, 2026 NA

Howrah - West Bengal

Tender For supply of form no. s&t (dn)/ annex-ii. signal and telecom disconnection/ re-connection notice. book of 100 leaves, 1) unit- number of books. 2)size-215x305mm,plus/ minus 5mm, 3)printing paper-white map litho 60 gsm, i.s no. 1848/ part(1)2018. 4) printing- both side printing in black ink, with green and red bar, machine numbering in 3 places, printing matter to be collected from consignee, 5) binding- left side two stitching, by 20 gauge wire with brown kraft.paper cover of 110gsm of i.s no 1397/90 grade-ll (mg), 6) sample:one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain ten plus ten total twenty books. each ten books must be wrapped in more than 50 micron transparent polypropylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no., form no. & serial no. and cartoon serial. special condition:-quantity is innumber of books and material to be supplied in book. [ warranty period: 30 months after the date ofdelivery ]

CTN :45144252

26 May, 2026 10.00 Lacs

Shahdol - Madhya Pradesh

Tender For annual tender of supply of water supply materials - water supply material, g.i pipe 1 inch, g.i pipe 2.inch, g.i pipe 3 inch, g.i socket 1 inch, g.i socket 1.25 inch long, g.i socket 2.inch, g.i socket 2.inch long, g.i socket 3 inch, g.i elbow 1 inch, g.i elbow 1.25 inch, g.i elbow 2.inch, g.i elbow 3 inch, g.i tee 1 inch, g.i tee 1.25 inch, g.i tee 2.inch, g.i tee 3 inch, hdpe pipe 1 inch, hdpe pipe 1.25 inch, hdpe pipe 2 inch, hdpe pipe 3 inch, hdpe nipple 1 inch, hdpe nipple 1.25 inch, hdpe nipple 2 inch, hdpe nipple 3 inch, hdpe equle tee 1 inch, hdpe equle tee 1.25 inch, hdpe equle tee 2 inch, hdpe equle tee 3 inch, hdpe elbow 1 inch, hdpe elbow 1.25 inch, hdpe elbow 2 inch, hdpe elbow 3 inch, hdpe bend 1 inch, hdpe bend 1.25 inch, hdpe bend 2 inch, hdpe bend 3 inch, s.s. clamp with nut bolt, 2 inches, a.c. pipe 4 inches, washer no. 2 and 3, brass elbow 1/2 inch, brass elbow 1 inch, brass elbow 3/4 inch, raw rubber, cable 2.5 mm and 6 mm (national/kisan/texmo), connection cable 4 mm / armored - isi, connection cable 6 mm / armored - isi, pvc saddle clamp set for pipe connection 1 inch, pvc saddle clamp set for pipe connection 1.25 inch, pvc saddle clamp set for pipe connection 2 inch, pvc saddle clamp set for pipe connection 3 inch, ms saddle clamp set for pipe connection 1 inch, ms saddle clamp set for pipe connection 1.25 inch, ms saddle clamp set for pipe connection 2 inch, ms saddle clamp set for pipe connection 3 inch, hose clamp s.s. 1 inch, hose clamp s.s. 1.25 inch, hose clamp s.s. 2 inch, hose clamp s.s. 3 inch, pvc socket 1 inch, pvc socket 1/2 inch, pvc socket 3/4 inch, pvc valve 1 inch, pvc valve 1/2 inch, pvc valve 3/4 inch, pvc tee 1 inch, pvc tee 2 inches, pvc teflon tape, pvc gate valve 1 inch (kisan/texmo), pvc gate valve 1/2 inch (kisan/texmo), pvc gate valve 2 inches (kisan/texmo), pvc gate valve 3/4 inch (kisan/texmo), pvc elbow 1 inch (kisan/texmo), pvc elbow 1/2 inch (kisan/texmo), pvc elbow 2 inches (kisan/texmo), pvc elbow 3/4 inch (kisan/texmo), pvc casing pipe plain pipe 100 mm (kasta/kisan), pvc pipe 1 inch (kisan/texmo), pvc pipe 1/2 inch (kisan/texmo), pvc pipe 3/4 inch (kisan/texmo), pvc pipe 1.25 inch (kisan/texmo), pipe wrench 12 inches, pipe wrench 14 inches, pipe wrench 16 inches, pipe lifter 2.25 inches, pipe die 1.25 inch, panel board 15 hp three phase bentex (automatic), patti clamp 1 inch (isi), patti clamp 1.25 inch (isi), patti clamp 2 inches (isi), patti clamp 3 inches (isi), rubber ring 80 mm (isi) 3 inches, rubber ring 100 mm (isi) 4 inches, rubber ring 125 mm (isi) 5 inches, rubber ring 150 mm (isi) 6 inches, rubber seat packing, rod die, c.i. flange 2 inches, c.i. flange 3 inches, c.i. flange 4 inches, c.i. reducer tee 100x100 mm (isi), c.i. reducer tee 80x100 mm (isi), c.i. reducer tee 100x100x150 mm (isi), c.i. reducer tee 80x80x100 mm (isi), c.i. tee 100x100x100 mm (isi), c.i. tee 100x100x80 mm (isi), c.i. tee 150x150x150 mm (isi), c.i. tee 80x80x100 mm (isi), c.i. tee 80x80x80 mm (isi), c.i. tail piece 100 mm (isi), solvent, white cement, water tank 500 liters (syntex/kisan/texmo), water tank 1000 liters (syntex/kisan/texmo), vice handpump no. 4, chain pulley block 3 tons, nut and bolt, tail piece 2, 3, and 4 inches, gate valve 1 inch, gate valve 2 inches, gate valve 3 inches, gate valve 4 inches, gate valve brass 1 inch - isi, gate valve brass 1/2 inch - isi, gate valve brass 3/4 inch - isi, gate valve brass 2 inches - isi, gland rope, end cap pvc 1 inch, end cap pvc 1/2 inch, end cap pvc 3/4 inch, d joint ci 3 inches, d joint ci 4 inches, d joint ci 6 inches, hdpe d joint 2.5 inches, hdpe d joint 3 inches, hdpe d joint 4 inches, hand grinder machine 1600 watt bosch 5 inch, hand grinder blade 5 inch and 6 inch, hammer machine 1500 watt 26 mm bosch, breaker machine demolition 5 kg, fusing machine, sluice valve 50 mm, sluice valve 75 mm, sluice valve 90 mm, sluice valve 110 mm, tee 75 mm, tee 90 mm, reducer socket gi 1.25 inch-1.5 inch, reducer socket gi 2 inch -1.25 inch, r

CTN :45183801

05 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of form no. c&p-13/c&p/r-2. 1)unit- number of books, 2)size:215x305mm,plus/minus 5mm,3) printing paper: white map litho 60 gsm, i.s. no. 1848/part(1) 2018 ,4)printing-one side in black ink with machine numbering in three places as counter foil basis. printing matter to be collected from consignee, 5) binding- left side two stitching by 20 gauge wire with brown kraft paper cover of 110 gsm of i.s no 1397/90 grade-ii(mg), 6) sample- one sample for printing, binding and finishing to be got approved from consignee before bulk printing ,7) packing: each pack will contain ten plus ten total twenty books. each ten books packing must be wrapped in more than 50 micron transparent polypropylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l. no.,form no. & serial no. if any. special condition:- quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45195271

04 Jun, 2026 NA

Samastipur - Bihar

Tender For supply of form no. t-806. shunting order. books of 50 leaves in triplicate. . printed with blue ink.brown kraft cover binding.. top wire stitching in two places, one side printing machine numbering size: 26 cm x 17 cm. paper: white map litho 60 gsm, i.s no. 1484/07 (reaffirmed 2012). paper must conform to para 4.8.2 (a) type-a of i.s-1848, brown craft paper;110 gsm of i.s no 1397/90 grade-ii (mg) printing matter to be collected form consignee and one sample for printing, binding and finishing to be got approved from consignee before bulk printing. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45112975

28 May, 2026 NA

Budgam - Jammu And Kashmir

Tender For supply of drill machine battery opertaed , wood cutter blade 10 inch , 4 inch sander disk attachment , wooden sander disk 120 number 100 number 80 number and 60 number , iron drill bit set taparia , pincer taparia , plier taparia , wood chisel set , file triangular 5 inch taparia , hand plainer machine blade , iron cutter blade 4 inch , iron cutter blade 14 inch , iron grinder wheel 4 inch , fleb disc 4 inch , screw driver 2 in one 12 inch , sharpening stone , table bench wise , copper welding machine grip clip , welding rod , nails 3inch 2.5 inch 2 inch 1.5 inch , black screw 1 inch 1.5 inch and 2 inch , hp drill nut 1 inch 1.5 inch 2 inch , pvc gitti plastic 6 mm , inch tape 10 feet , inch tape 15 feet , welding machine wire , sender paper patta wala 120 number 220 number 320 number , writing brush round 01 to 15 number , writing brush round 01 to 07 number , 2 and 3 feet scale , permanent marker red black blue green , water fabric colour camel , paper cutter , colour rangoli all colour , paint , tipai 05 kg , scissor big size , zamura , hammer 300 gram , raanpi , kattar for shoe stitching , renth sharpening stone , summi to pierce leather , thread shoe stitching , solution pasting liquid , nails big size , thread for tarpaulin repair , needle small and big for packing , needle sewing machine 21 number

CTN :45049887

25 May, 2026 NA

Howrah - West Bengal

Tender For supply of form no. c&p-13/c&p/r-2. treasury remittance note. book of 100 leaves. 1)unit- number of books, 2)size:215x305mm,plus/minus 5mm,3) printing paper: white map litho 60 gsm, i.s. no. 1848/part(1) 2018 ,4)printing-one side in black ink with machine numbering in three places as counter foil basis. printing matter to be collected from consignee, 5) binding- left side two stitching by 20 gauge wire with brown kraft paper cover of 110 gsm of i.s no 1397/90 grade-ii(mg), 6) sample- one sample for printing, binding and finishing to be got approved from consignee before bulk printing ,7) packing: each pack will contain ten plus ten total twenty books. each ten books packing must be wrapped in more than 50 micron transparent polypropylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l. no.,form no. & serial no. if any. special condition:- quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ]

CTN :44966098

06 May, 2026 280

Channarayapatna - Karnataka

Tender For procurement of water supply pvc,upvc,cpvc materials and pump motor materials for the year of 2026-27 - volatage meter, prevender, pump motor 20hp 50 stage, pump and motore 10hp 50 stage, motor for open well 1 hp, motor and pump 7.5hp 15stage, motor 5hp 10stage pump, end connection for hdpe- iso certified, hdpe pipe 1.25 inch 20 gauge- iso certified, hdpe pipe 1.5 inch 20 gauge - iso certified, gi thread end cap 0.5 inches- iso certified, gi pipe 0.75 inches with thread- iso certified, gi coller 2 inches- iso certified, gi coller 0.75 inches- iso certified, gi elbow 0.75 inches- iso certified, gi elbow 0.5 inches- iso certified, gi tee 0.75 inches- iso certified, gi tee 0.5 inches- iso certified, gi union 3 inches- iso certified, gi union 2 inches- iso certified, gi union 2.5 inches- iso certified, motor 5.5 hp 50stage pump, motor auto starter, amphere meter, pump and motor auto starter, gi union 2 inches- iso certified, gi tap 0.75 inches- iso certified, gi tap 0.5 inches- iso certified, gi gate wall 2.5 inches- iso certified, gi gate wall 2 inches- iso certified, brass gate wall 2.5 inches- iso certified, brass gate wall 2 inches- iso certified, solvent cement gum- iso certified, gi 2 nrv- iso certified, gi elbow 0.5 inch- iso certified, gi collar 0.5 inch- iso certified, gi nipple feet 2 feet 0.5 inch- iso certified, gi nipple feet 1 feet 0.5 inch- iso certified, gi elbow 0.75inch- iso certified, gi collar 0.75 inch- iso certified, gi nipple 0.75 2feet - iso certified, gi nipple 0.75 1feet - iso certified, gi nipple feet 2 inch- iso certified, gi bend 2 inch- iso certified, axcel blades- iso certified, sealent 100ml - iso certified, gi collar 2 inch - iso certified, gi clamp set bore cap, complete panel board items, gi pipe 2 inches class b , alluminium wires 20sq.mm - iso certified, alluminium wires 16sq.mm - iso certified, alluminium wires 12sq.mm - iso certified, alluminium wires 10sq.mm - iso certified, alluminium wires 6sq.mm - iso certified, panel board - iso certified, starter 20hp - meco, starter 17.5hp - meco, starter 15hp - meco, starter 7.5hp - meco, starter 5hp - meco, submersible cabel 10sq 3 core , submersible cabel 6sq 3 core , submersible cabel 4sq 3 core , motor and pump 25hp 40 stage pump, motor and pump10hp 20 stage, motor and pump 17.5 hp 36stage, motor and pump 20hp 40 stage, motor and pump 15hp 30 stage , motor and pump7.5hp 56 stage, motor and pump 5hp 50 stage , motor and pump 12.5hp 25 stage, item name - hdpe pipes (pe100-pn6.0) 63mm dia conforming to is 4984-2016, item name - ef reducer coupler 90mm x75mm, item name - ef reducer coupler 75mm x63mm, item name - elctro fusion elbow 125mm, item name - elctro fusion elbow 110mm, item name - elctro fusion elbow 90mm, item name - elctro fusion elbow 75mm, item name - elctro fusion elbow 63mm, item name - elctro fusion coupler 125mm, item name - elctro fusion coupler 110mm, item name - elctro fusion coupler 90mm, item name - elctro fusion coupler 75mm, item name - elctro fusion coupler 63mm, item name - ef reducer coupler 125mmx110mm, item name - ef reducer coupler 110mmx90mm, item name - ef reducer coupler 90mmx75mm, item name - ef reducer coupler 63mmx50mm, item name - road cutting machine, item name - ppr fusing machine, item name - electro fusion machine, item name - hdpe mta 20mm, item name - hdpe mta 90mm, item name - hdpe mta 75mm, item name - hdpe mta 63mm, item name - ms flang 2.5inch, item name - 50mm dia air valve, item name - elctro fusion tee 125mm, item name - elctro fusion tee 110mm, item name - elctro fusion tee 90mm, item name - elctro fusion tee 75mm, item name - elctro fusion tee 63mm, item name - hdpe flange 20mm, item name - hdpe flange 90mm, item name - hdpe flange 75mm, item name - hdpe flange 63mm, item name - hdpe pipes (pe80-pn6.0) 20mm dia conforming to is 4984-2017, item name - hdpe pipes (pe80-pn6.0) 90mm dia conforming to is 4984-2016, item name - hdpe pipes (pe100-pn6.0) 75mm dia conforming to is 4984-2016, item name-cpvc gum

Central Government/Public Sector

CTN :44842920

15 Apr, 2026 NA

Samastipur - Bihar

Tender For corrigendum : supply of form no. t-806. shunting order. books of 50 leaves in triplicate. . printed with blue ink. brown kraft cover binding.. top wire stitching in two places one side printing machine numbering size:29.7cm x 21 cm . paper: white map litho 60 gsm i.s no. 1484/07 (reaffirmed 2012). paper must conform to para 4.8.2 (a) type-a of i.s-1848 brown craft paper;110 gsm of i.s no 1397/90 grade-ii (mg) printing matter to be collected form consignee and one sample for printing binding and finishing to be got approved from consignee before bulk printing. (item description updated on 18/02/26) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44769511

21 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot miscellaneous scrap - 1 condemned heavy duty power operated wire stitching machine with ferrous or minor non-ferrous attachment if any and 1 motor fitted with ferrous or non ferrous attachment if any mc no 71815 qty 01 no approx wt 100 kgs 2 condemned power operated light duty wire stitching machine with ferrous or minor non ferrous attachment if any and 1 motor fitted with ferrous or non ferrous attachment if any mc no 71814 qty 01 no approx wt 100 kgs 3 condemned wire stitching machine with ferrous or minor non ferrous attachment if any and 1 motor each fitted with ferrous or non ferrous attachment if any mc no. 71816 71817 71818 qty 03 nos approx w. 300 kgs note 1 delivery will be made on by lot basis entire quantity of lot to be lifted by purchaser 2 material found other than description not to be delivered 3 the machine with ferrous or minor non-ferrous attachment if any and motor fitted with the machine with ferrous or minor non ferrous attachment if any from part of the lot no pf motors on visual basis is 03 motors along with electrical fittings and to be delivered to the purchaser loose items other than lot available in byculla printing press should not be delivered

Central Government / Public Sector

CTN :44660867

09 Apr, 2026 NA

Multi City - Multi State

Tender For supply of sn 75 b : gate pass book containing 150 leaves (3x50 sets), size a5, printing on bothsides in bi-lingual (hindi and english as per specimen/matter). proof should be approved before printing. to be machine serial numbered in 06 to 08 digits as per alpha numeric series and serial number allotted by s&f depot. printing in black ink on 58 gsm ir logo white water mark security paper conforming to is no. 1848/2007 as amended up to date. cover page of 130 gsm brown kraft paper as per is 1848/2007 as amended up to date. binding - side stitching (two wire stitches on left). ]

Fusing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector