Latest galvanized bolt Tenders | Government galvanized bolt Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

Central Government/Public Sector

CTN :40538188

07 Jul, 2025 NA

Hubli - Karnataka

Tender For supply of lead acid low maintenance secondary cells 2v 300 ah capacity 10 hr. rate of discharge at 27 c assembled in hard rubber or ppcp container with tubular positive and negative plates conforming to rdso spec.irs:s:88/2004. the cells shall be supplied with microporous vent plugs cum sealed floats intercell conn ectors nut bolts and washers. the cells to be supplied in dry and uncharged condition without tool kit as per specn. rdso spec.irs:s:88/2004 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40558755

07 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of octagonal boom section-03 as per drg no: rdso/s-11600 duly painted with coupling for thir d joint with 16 nos. of nuts & bolts with spring washer out of which 8 nos. of nuts to be welded on inner si de of smaller section of coupling plates at the hole positions. additional 8 nos. of holes of 12mm dia.to be drilled on spot welded side of coupling plates and boom. party should submit nabl authorised lab certifica te along with material. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40558756

07 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of octagonal boom section-03 as per drg no: rdso/s-11600 duly painted with coupling for thir d joint with 16 nos. of nuts & bolts with spring washer out of which 8 nos. of nuts to be welded on inner si de of smaller section of coupling plates at the hole positions. additional 8 nos. of holes of 12mm dia.to be drilled on spot welded side of coupling plates and boom. party should submit nabl authorised lab certifica te along with material. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538527

10 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of goods, improved sej,52kg (with 65mm max. gap) rdso drawing no: t-6930 with all fitting complete but excluding erc, grsp, fish plate, fish bolts and nuts and gfn/metal liners having irs speci fication t-10-2000 with latest alteration up to date of opening of tender. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40520533

13 Jun, 2025 6.19 Lacs

Ukai - Gujarat

Tender For supply of hot deep galvanized nuts & bolts of various size and other miscellaneous materials at switchyard, tps, ukai.(et-5965 switchyard) - cadimium coated hexagonal head bolt and nut with check nut, size m-4, 40mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-4, 65mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-4, 80mm length with 2 plain washer, cadimium coated hex.head bolt,nut & 2plain washer size; m4 x 100 mm full thrad, cadimium coated hexagonal head bolt and nut with check nut, size m-6, 40mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-6, 65mm length with 2 plain washer, cadimium coated hexagonal head bolt and nut with check nut, size m-6, 80mm length with 2 plain washer, cadimium coated hex.head bolt,nut & 2plain washer size; m6 x 100 mm full thrad, hot deep galvanised hexagonal head bolt and nut with check nut, size m-8, 40mm length with 2 plain washer, hot deep galvanised (gi) hex.head bolt,nut & 2 plain washer size; 8 x 65 mm full thrad, hot deep galvanised hexagonal head bolt and nut with check nut, size m-8, 80mm length with 2 plain washer, hot deep galvanised (gi) hex.head bolt,nut & 2plain washer size; 8 x 100 mm full thrad, hot deep galvanised hexagonal head bolt and nut with check nut, size m-10, 40mm length with 2 plain washer, hot dipped g.i. full thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m10x65 mm long, hot dipped g.i. full thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m10x50 mm long, hot deep galvanised hexagonal head bolt and nut with check nut, size m-10, 80mm length with 2 plain washer, m10 x 70 mm hot deep full thread galvanised nut-bolt-washer., hot dipped g.i. half thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m10x90 mm long, hot deep galvanised (gi) hex.head bolt,nut & 2plain washer size; 10 x 100 mm full thrad, hot deep galvanised (gi) hexagonal head bolt,nut & 2 plain washer size; 12 x 50 mm full thrad, hot deep galvanised hexagonal head bolt & nut with check nut, size-12 mm dia x 65 mm length with 02 plain washer, hot dipped g.i. half thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m12x80 mm long, hot dipped g.i. half thread hexagonal head bolts with nuts and two numbers plain washer 2mm thickness, size: m12x100 mm long, hot deep galvanised hexagonal head bolt & nut with check nut, size-12 mm dia x 125 mm length with 02 plain washer, hot deep galvanised hexagonal head bolt and nut , size m-16, 60mm length with 2 plain and 1 spring washer, hot deep galvanised hexagonal head bolt and nut , size m-16, 90mm length with 2 plain and 1 spring washer, hot deep galvanised hexagonal head bolt and nut , size m-16, 125mm length with2 plain and 1 spring washer, hot deep galvanized plain washer , size-08mm, hot deep galvanized plain washer , size-10mm, hot deep galvanized plain washer, size-12mm, hot deep galvanized plain washer , size-14mm, hot deep galvanized plain washer , size-16mm, bimetalic plate suitable for palm connector size 100x100x1 mm of alluminun and copper, bimetallic plate suitable for palm connector size 150 x 100x1 mm of aluminum & copper (without hole), s.s. bottle for oil sample of dga test for tmer, s.s. bottle for oil sample for dga test of tmer oil for 1 ltr, s.s. bottle for oil sample for dga test of tmer for 1.5 ltr, rotary gear pump-motor set, capacity: 50 lpm., pvc flexible hose pipe 25 mm

State Government

CTN :40548169

10 Jun, 2025 13.24 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of spares of edp pump make su pump model cppi 150x100-315 and pump sr.no.58735 1999) installed at dm plant iii site area 1x500mw sgtps mppgcl birsinghpur - base plate complete set , complete casing assembly , complete bearing bracket assembly , gasket for casing , ring for impeller , stud & nut for casing (12 nos.) , bolts for gland (2 nos) , pedestal for brg bracket , stud & nut for for brg bracket (4 nos) , bolts for brg housing (3 nos.) , driving key for shaft , bolts for brg cover (4 nos.) , pin for shaft sleeve , sleeve ring , bolt for casing and base plate (4 nos.)

Central Government/Public Sector

CTN :40539937

09 Jun, 2025 NA

Karimnagar - Telangana

Tender For supply of ventilation system for chp for ntpc telangana project - centrifugal fan sisw type of capacity 41600 cmh, motor 11kw 4p , exhaust air gravity louvers of size 500 x 400, to be fixed on mcc room wall, material of construction and painting details shall be as shown in typical drawing annexure 9 , pre fabricated gi supply air duct of size, segments, transition pieces, duct support fixtures like angle supports, anchor bolts, ms rods, gasket, corner, cleat etc. as applicable , double louvered double deflection type grill with volume damper of size 600 x 300 to be fixed in supply air duct , fusible link type fire dampers to be fixed in supply air duct, size 1200 x 900 including all electrical and c and i items as per mechanical requirement. , tube axial exhaust air fans with rain protection cowl with bird mesh and fixing support arrangement as shown in typical drawing of 19000 cmh capacity , tube axial fans with rain protection cowl with bird mesh and fixing arrangement as shown in typical drawing each of 2540 cmh capacity , propeller air fan with rain protection cowl with bird mesh and fixing arrangement as shown in typical drawing of 2210 cmh capacity , no. of man-days , no. of man-visits

Central Government/Public Sector

CTN :40170261

02 Jun, 2025 NA

Medak-T - Telangana

Tender For bid to ras corrigendum : supply of hanger components - hy9603163120_spring support var _pedestal _ 250 by 250 , hy9603153176_spring housing 630 by 150 , hy9603106011_suspension eye 12 , hy9603108014_fork_12 , hy9603108022_fork m20x130 _var n0 02 , hy9603108030_fork m24 x 130 _var n0 03 , hy9603108049_fork m30x160 _var n0 04 , hy9603114014_eye rod dia 12 , hy9603109010_l h_eye rod dia 12 , hy9603109045_l h_eye rod dia 25 , hy9603114022_eye rod dia 16 , hy9603114049_eye rod dia 25 , hy9603115029_r h _suspension bolt dia 12 , hy9603115037_r h _suspension bolt dia 16 , hy9603115045_r h_suspension bolt dia 20 , hy9603116025_l h_suspension bolt dia 12 , hy9603116033_l h_suspension bolt dia 16 , hy9603118010_turn buckle m12 , hy9603118044_turn buckle m24 , hy9603124044_fork attach , hy9603124060_fork attach var n0 06 , hy9603141054_clamp_3 bolts galvzd 2 inch , hy9603141062_clamp_3 bolts galvzd 3 inch , hy9603141070_clamp_3 bolts galvzd 4 inch , hy9603141089_clamp_3 bolts galvzd 6 inch , hy9603141097_clamp_3 bolts galvzd_8 inch , hy9603141100_cs clamp _3 bolts galvzd _10 inch , hy9603141321_clamp as with 3 bolts dia 34mm , hy9603141330_clamp as with 3 bolts dia 49

Central Government/Public Sector

CTN :40542971

09 Jun, 2025 NA

Talcher - Odisha

Tender For minor oh of generator includes attending the cc bolts leakage of exciter rotor, attending the cc bolts leakage of generator rotor, exciter rotor replacement and exciter rotor insitu slip ring machining etc. at unit-3 ntpc-talcher stps kaniha 500 mw

Galvanized Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors