Latest galvanized pipe Tenders | Government galvanized pipe Tenders

State Government

CTN :43117057

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of e/m equipment of various tube wells installed at sarai kale khan area under jangpura constituency ac-41. - supply of double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends and welded support l-type ms bracket in both flange with slot of submersible cable.make: tata/ jindal. , supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of weldedconstruction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long). make: granlay / havells./gloster/any djb approved make., supply of nut bolts, washer 1/2 dia 1 long full threaded., supply of rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gl pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gl pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Corporations/Associations/Others

CTN :43050103

12 Dec, 2025 1.49 Crore

Ichalkaranji - Maharashtra

Tender For 2 .providing supplying submersible pump, and allied material for newly 107 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16

State Government

CTN :43074834

05 Jan, 2026 15.21 Lacs

Jalpaiguri - West Bengal

Tender For deployment and hiring charges of a boat mounted dredging pump assembly including reconditioned diesel engine, overhauled slurry pump, timber based floating platform with gl drum floatation, cl delivery pipe line with complete accessories, anchoring a

CTN :43036454

13 Dec, 2025 30.00 Lacs

Bhiwadi - Rajasthan

Tender For annual rate contract of supply of consumable parts required for truck mounted mechanized road sweeper machine as per enclosed specifications - cartridge filter dia-200 mm l-900,, side brush disc dia 600mm,bristle length 11 inch, central brush dia 400 mm, l-1800 mm, transperent pvc duct hose 6" - id152.4mm (5meter), rubber 40x5 mm (8meter), sponge rubber 25x25 mm (6meter), sponge rubber 40x40 mm (10meter), rubber suction hose id 250mm x length 1250mm, rubber for suction nozzle, solid tyre 10", v belt spb 89, rubber sheet 8 mm-rcv (50kg), rubber pad 44mm x 72mm x 200mm, fuse 10 amp, fuse 20 amp, hyd. oil -68 (500 ltr), sae 80w90 api gl-5, compressor oil elgi, compressor filter, strainer 1/2"-italy, filter 1/2" bsp model-hfr05-04b-149, plastic spray nozzle 3/8" bsp, pu pipe 6 mm - janatics (210meter), pu pipe 8 mm - janatics (10meter), pu joint 6 mm - janatics, pu tee 6x6x6 mm - janatics, suction strainer-sc3-030, suction strainer-sc3-040, suction strainer-sc3-100, dowty seal 2", dowty seal 1-1/2", dowty seal 1-1/4", dowty seal 1", 2213k salf aligned ball bearing-tapper, lock nut km13 (m65x2), lock washer mb13, seals for gear box, seals for hyd. motors, seals for hyd. pumps, seals for hyd. cylinders 130x120x2500 st, skf bearing grease lghp 2/1 high temperatur (2kg)

State Government

CTN :42985190

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For tender for electric line materials under o&m head for f.y. 2025-26 - 33 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 33 kv polymer pin insulators 10 kn with gi pin and nut & washer, 33 kv post insulator 10 kn (polymer), 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut & washer, 11 kv hg fuse unit (polymer type), 33 kv hg fuse unit (polymer type), gi wire no. 6/8/10, gi stay set complete for d/s/s (1900x 20mm) with stay wire 7/10 swg and guy insulator, stay set complete (1800x20mm) with stay wire 7/10 swg & guy insulator (galv), 11 kv stay set complete (1800x16 mm) with stay wire 7/10 swg and guy insulator, ace chemrod ( artificial concept of earthing by chemical rod ) :- ace chemrod earthing electrode (consisting mild steel galvanized pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom.

State Government

CTN :42985206

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For electric line materials under o&m head for f.y. 2025-26 - ace chemrod (artificial concept of earthing by chemical rod):- ace chemrod earthing electrode (consisting mid steel galvanised pipe of size 2500 mm in length x 48 mm outer dia x 2 mm thick. ms-rod of size 2575 mm x 16 mm be weided with bottom. the epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanized pipe, earthing complete conventional type having intermittent layer of charcoal and salt/gi earthing pipe 3.1 meter long & 40 mm dia and 50 kg bentonite powder, earthing (chemical) with gi earthing pipe 40mm 3.1 mtrs. long (bentonite as intermittent layers), gi stay set complete for d/s/s (1900x20mm) with stay wire 7/10 swg and guy insulator, 11 kv stay set complete 1800x16mm with stay wire7/10swg and guy insulator, earthing (chemical) with gi earthing pipe 20 mm 2.5 mtrs. long, gi stay set complete for d/s/s (1900x 16mm) with stay wire 7/12 swg and guy insulator, lt stay set complete (1700x16 mm) with stay wire 7/12 swg, gi stay wire no. 7/8 ,7/10 ,7/12 ,7/14, 7/16, gi wire no. 6/8/10, 33 kv h.g fuse unit (polymer type), 11 kv h.g fuse unit (polymer type), 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 45 kn with h/w fitting, 33 kv polymer pin insulator 10 kn with gi pin and nut & washer, 11 kv pin insulator 5 kn with gi pin (polymer type) and nut &washer, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut &washer, 33 kv post insulator 10 kn (polymer), lt pin insulator with pin (porcelain type), lt shackle insulator (porcelain type)

CTN :42987335

12 Dec, 2025 NA

Kullu - Himachal Pradesh

Tender For repair and restoration under rain damage lwss neoli tharman in tehsil & distt. kullu (sh:- laying, jointing and testing of gl pipe 32mm dia at tharman nallah in gp gharahan) sdf/2025/366

CTN :42987336

12 Dec, 2025 NA

Kullu - Himachal Pradesh

Tender For repair and restoration under rain damage lwss chansari seogi kinja in tehsil & distt. kullu (sh: laying, jointing and testing of gl pipe 40mm dia at kosh nallah) sdf/2025/363.

CTN :42987334

12 Dec, 2025 NA

Kullu - Himachal Pradesh

Tender For restoration of rain damages of wss lari manari and devdhar in tehsil & distt. kullu (sh;- excavation, dismantling, relaying, jointing testing of gl pipe of 40mm dia and 25mm dia in various rd's)

Galvanized Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations/Associations/Others

Corporations/Associations/Others

State Government

State Government

State Government