Latest galvanized post shore Tenders | Government galvanized post shore Tenders

CTN :42809335

03 Dec, 2025 NA

Rajauri - Jammu And Kashmir

Tender For bid to ras supply of laip a type y shaped of 75mm x 75mm x 6mm dimensions notch cut and holes 4. 215 mtr long minimum weight 28. 662kg with tolerance as per specification and drawing attached. make tata rinl sail jindal , laip b type 65mm x 65mm x 6mm dimension notch cut and holes 2. 55 mtr long minimum weight 14. 79kgs with tolerance as per specification and drawing attached make tata rinl sail jindal , laip c type of 65mm x 65mm x 6mm dimension notch cut and holes 2. 25 mtr long minimum weight 13. 05kgs with tolerance as per specification and drawing attached make tata rinl sail jindal , laip d type of 65mm x 65mm x 6mm dimensions notch cut and holes 1. 35 mtr long minimum weigh 7. 83kgs with tolerance as per specification and drawing attached make tata rinl sail jindal , ms pole 6 mtr height medium grade 65mm nominal bore with 76. 10mm outer dia including 1. 5 rm long angle iron of size 40x40x5mm thick make tata rinl sail jindal , mounting arms fabricated from ms medium class pipe 40mm to 50mm dia and 1 mtr to 1. 5 mtr long as per specification and drawing attached. , gi barbed wire hot rolled of 2. 5mm dia line wire and 2 mm dia wire for barbs weight 120 gm per mtr with tolerance all as per specification and drawing attached. , a1 high security weld mesh panels of size 2600mm x 800mm of weight 20. 52 kg all as per specification and drawing attached. , laip strut picket of 60mm x 60mm x 6mm 2. 4 mtr long minimum weight 14 kg with tolerance all as per specification and drawing attached. , a7 straining y arm for supporting top ptcc. material ms l angle 50mm x 50mm x 5mm. 510mm 1 arm length. , a6 truss support post with rain end cap type circular hollow section. dimension 76mm dia all as per specification and drawing attached. , cement of 43 grade opc in sealed bags each weighing 50 kg all as per specification attached. make ambuja acc birla jk lakshmi ultratech , fine aggregate sand conforming to is 383 1970 , aggregate 20mm graded conforming to is 383 1970.

CTN :42849454

04 Dec, 2025 NA

Jalpaiguri - West Bengal

Tender For corrigendum : supply of xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1),mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1),modular piano type domestic electrical switches as per is 3854,ceiling rose - is 371,led batten,brick,surface excavation 30 cm deep and averaging 15cm deep,excavating in post holes 0.5 cum getting out,material and labour cement concrete 1 by 3 by 6 type c2,returning filling incl spreading levelling watering and ramming in layers,removing excavated material 50m and not exc 100m,material and labour for brick works with fly ash bricks,material and labour for rendering 15mm thick in two coats,material and labour for applying two coat of exterior emulsion paint,supply and fixing steel work in tubular trusses ms pipes in vertical column,supply and fix galvalume alu coating gi based steel sheet 0.50mm thick in roof,s and f galvalume alu coating gi based plain steel sh

CTN :43015297

23 Dec, 2025 5.16 Lacs

Puri - Odisha

Tender For supply of g i street light pole , 3 core copper single strand armoured ug cable , single core copper multi strand pvc cable , supply and fixing of led street light fittings , supply and fixing of pvc junction box , single pole mcb , supply and fixing of led post top , supplying and fixing of main switch fuse unit , pvc flexible hose pipe , insulation tape , supply and fixing of ceramic kit kat fuse unit , supplying and fixing of dp sheet steel enclosure on surface or recess , earthing , supplying and laying 25mm x 5mm gi strip , labour charges for excavation of trench , g i channel for mcb fixing , ss nut bolt and washers , labour charges for fixing of gate light with gi pipe fixing or grouting and supply connection , g i pipe for fixing gate light , labour charges including materials , shifting and re installation of existing solar street light pole with concrete base , labour charges for painting of gi street light pole , labour charges for removing of old pcc base , re-arrangement of electrical switchgears items

State Government

CTN :42985190

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For tender for electric line materials under o&m head for f.y. 2025-26 - 33 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 33 kv polymer pin insulators 10 kn with gi pin and nut & washer, 33 kv post insulator 10 kn (polymer), 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut & washer, 11 kv hg fuse unit (polymer type), 33 kv hg fuse unit (polymer type), gi wire no. 6/8/10, gi stay set complete for d/s/s (1900x 20mm) with stay wire 7/10 swg and guy insulator, stay set complete (1800x20mm) with stay wire 7/10 swg & guy insulator (galv), 11 kv stay set complete (1800x16 mm) with stay wire 7/10 swg and guy insulator, ace chemrod ( artificial concept of earthing by chemical rod ) :- ace chemrod earthing electrode (consisting mild steel galvanized pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom.

State Government

CTN :42985206

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For electric line materials under o&m head for f.y. 2025-26 - ace chemrod (artificial concept of earthing by chemical rod):- ace chemrod earthing electrode (consisting mid steel galvanised pipe of size 2500 mm in length x 48 mm outer dia x 2 mm thick. ms-rod of size 2575 mm x 16 mm be weided with bottom. the epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanized pipe, earthing complete conventional type having intermittent layer of charcoal and salt/gi earthing pipe 3.1 meter long & 40 mm dia and 50 kg bentonite powder, earthing (chemical) with gi earthing pipe 40mm 3.1 mtrs. long (bentonite as intermittent layers), gi stay set complete for d/s/s (1900x20mm) with stay wire 7/10 swg and guy insulator, 11 kv stay set complete 1800x16mm with stay wire7/10swg and guy insulator, earthing (chemical) with gi earthing pipe 20 mm 2.5 mtrs. long, gi stay set complete for d/s/s (1900x 16mm) with stay wire 7/12 swg and guy insulator, lt stay set complete (1700x16 mm) with stay wire 7/12 swg, gi stay wire no. 7/8 ,7/10 ,7/12 ,7/14, 7/16, gi wire no. 6/8/10, 33 kv h.g fuse unit (polymer type), 11 kv h.g fuse unit (polymer type), 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 45 kn with h/w fitting, 33 kv polymer pin insulator 10 kn with gi pin and nut & washer, 11 kv pin insulator 5 kn with gi pin (polymer type) and nut &washer, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut &washer, 33 kv post insulator 10 kn (polymer), lt pin insulator with pin (porcelain type), lt shackle insulator (porcelain type)

State Government

CTN :42992465

09 Dec, 2025 5.39 Lacs

Carnicobar - Andaman And Nicobar Islands

Tender For fabricating supplying of mild steel modular stage frame with dual-height gi pipe post supports and 19mm thick marine grade plywood decking for lapathy section, under sd-iv,cd,cn, apwd. - a/r & m/o residential and non residential building at sub division no.iv under ee/cd/cn during the year 2025-26 sub work: fabricating & supplying of mild steel modular stage frame with dual-height gi pipe post supports and 19mm thick marine grade plywood decking for lapathy section, under sd-iv,cd,cn, apwd

CTN :42568665

03 Dec, 2025 17.54 Lacs

Ahmedabad - Gujarat

Tender For bid to ras corrigendum : supply of demand of maintenance stores d d - tower bolts (non-ferrous metals) v2 as per is 204 (q2) , curtain pipe, sider and mounting bracket (q4) , hydraulically regulated door closers (q3) , hasps and staples as per is 363 (q3) , non - ferrous metal butt hinges as per is 205 (q3) , metal alloy casting water tap with aerator (v2) (q3) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , connection pipe with nuts (v2) (q3) , flushing cistern (q3) , toilet seat covers (v2) (q4) , waste fittings for washbasin and sinks as per is 2963 (q3) , cp grating 150 mm dia , pvc ball valve 15mm , screw ss 1 inch full thread , screw ss 1 point 5 inch full thread , screw ss half inch full thread , paint synthetic enamal post office red , gi wiremesh roll of 15 mtrs , oil putty , plywood bwr grade off size 8 ftx4 ft x6mm , pvc ball cock float valve 20mm complete , double layer cyl verticle tank 1000 ltr white colour , double layer cyl verticle tank 700 ltr white colour , plywood bwr grade 8 ft x 4 ft x 19mm , ci bib cock 15 mm , pvc shower rose 15 x 100mm , water storage tank 1000 ltr , water storage tank 500 ltr , corner glass shelf 9 inch x 12 inch size , mortise door lock , mdf board 8 ftx4 ft x12mm , paint brush 50 mm , paint brush 75 mm , plywood bwr grade 8 ft x 4 ft x 4 mm , paint brush 100mm , nails wire 20 mm 20 gauge , nails wire 25mmx17 gauge , plywood bwr grade 6 ftx 3 ft x12mm , screw wood steel 50mm , bracket for wash hand basin , glass sheet 3 mm thick ordinary quality in sqaure 0 point 5 sqm each pane , glass sheet pin headed 4 ft x 4 ft x 5 mm thick , rat rail brass rod pattern spring 300 mm including roller and roller plate , nails wire 50mm 8g , aluminium hasp and staple 150mm , pvc grating round or square 100 x 150mm , white portland cement 5 kg bags , pvc lid for tank 1000 ltrs with hinges and screw , fevicol in 1kg pack , plywood bwr garde 8 ft x 4 ft x 6 mm , plywood bwr grade 7 ft x 3 ft x12 mm , nails wire 25mm 20 gauge , nails wire 75mm 8 gauge , screw wood steel 75mm , screw wood steel 45mm 8g , tape newar nylone 50 mm wide , thinner in 3 ltr pack , cp brass jet spray for wc with 1 point 5 mtr tube , cp brass soap dish , pvc ball cock float valve 15mm complete , ss sink coupling 32mm , knob pvc 25 mm complete , stainless steel plate rack size 900x750x250mm , laminated brown sheet 8 ftx4 ft 1 mm , paint synthetic enamel black , plywood bwr gde of size 8 ft x4 ft x12mm , pvc urinal waste pipe with coupler screw type , french polish , melamine polish , cabinet mirror 350 x 450mm , cp waste coupling for steel kitchen sink 100x32mm , mdf board 8 ftx4 ftx18 mm , paint white 1 ltr pack , oil varnish , pvc grating with waste hole basin mixer 150mm , pvc waste pipe flexible 40mm x 600 mm , pvc ball valve 25mm , peg set cp set of 5 , paint synthetic enamel og in 1 ltr pack , peg set brass for hat stand mirror , pvc waste pipe corrugated 32 x 900 mm long , abrasive cloth no 100 , looking mirror 600x450mm pvc frame , health faucet cp with 1 mtr tube , glass sheet plane 4 ftx 4 ft x 5 mm thick , cp shower rose 15 mm size 150 mm , knob cp complete 25mm for door and drawer , cp toilet paper holder , pvc ball valve 20mm , aluminium tower bolt 125mm , aluminium door stopper 100mm double rubber type , pvc ball cock float valve 25mm complete , tank cover for tank suitable for 500 and 1000 ltrs , pvc waste pipe 32 mm flexible type heavy grade 600 mm length //bid details 2 / 83 mm length

corporations/Associations/Others

CTN :42990872

12 Dec, 2025 NA

Puducherry - Tamil Nadu

Tender For auction sale of aluminium scrap,scrap control cable,scrap plastic/pvc material,scrap post insulator(each having 4 stacks),scrap-long rod polymer insulator 120 kn,scrap power cable (al),ferrous iron/ms metallic scrap,g i scrap,scrap-gi earth wire,scrap htls gap conductor,scrap engine oil,scrap fire extinguisher,transformer oil empty drum,scrap 52kv bushing,scrap-iron water pipe,scrap opgw,scrap other battery (12v 75ah),scrap 12v battery (180ah lead acid),scrap common electrical items

CTN :42638963

05 Dec, 2025 24.02 Lacs

Ghazipur - Uttar Pradesh

Tender For corrigendum : installation work of 120 watt led street light, 09 meter gi octagonal pole from sikandarpur dr. shubham rai s turn to dm residence, bsnl office till post office. - सिकन्दरपुर डॉ0 शुभम राय के मोड़ से डी0एम0 आवास] बी0एस0एन0एल0 आफिस होते हुए पोस्ट आफिस तक 120 वॉट एल0ई0डी0 स्ट्रीट लाईट] 09 मीटर जी0आई आक्टागोनल पोल सहित अधिष्ठापन का कार्य।

State Government

CTN :42920788

16 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection agency:- consig

Galvanized Post Shore Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

State Government