Latest galvanizing Tenders | Government galvanizing Tenders

Central Government And Public Sector

CTN :42629518

17 Nov, 2025 NA

Tinsukia - Assam

Tender For supply of gi hot dip perforated type cable tray wall mountable of dimension (width 300 mm, height 50 mm, tray minimum thickness 2.0 mm) along with two nos. coupler plate and minimum 08 set of nut-bolts & washers for coupling. the tray is to be supplied along with all the required accessories for wall mounting such as support brackets, nut-bolts, washers, fasteners & clamps etc. width of support bracket shall be minimum 380mm so that tray can be mounted at a distance 50mm from wall. the quantity of support bracket and associated accessories should be suitable for supporting & mounting of cable-tray at a distance of 2 meter or less . support brackets, coupler plates, nut-bolts & washers, fasteners & clamps etc. shall be of either stainless steel (ss) or hot-dip galvanized iron (gi). galvanizing hot dip shall be as per is 2629/4759 for cable tray and associated accessories. make:

Central Government / Public Sector

CTN :42673101

25 Nov, 2025 NA

Krishna - Andhra Pradesh

Tender For supply of eot crane operator chairs, as per ansi 520 20-2007 standard and with specifications as below (1)seat type - revolving, (2) seat size: 18x18 inch, (3) seat height from floor : 23-25 inch, (4) tilting back seat- locking facility at back in vertical positioning and should be titled by unlocking, (5) cushion material: 2-inch cushion with esd pvc leather/fabric, (6) structure - tubular ms with chrome plating, (7) wheels - 1 esd + 4 normal, (8) surface resistance: >10e9 ohms.

Central Government/Public Sector

CTN :42704692

11 Dec, 2025 NA

Bangalore - Karnataka

Tender For award of license for provision of sale of milk and milk product at milk stall no. ms-1 on main entry concourse, opposite to station manager room and plastic (coke) crushing machine, (shop with ready structure); where erstwhile ms-1 stall was located; approx. area 80.51 sqft at ksr bengaluru city (sbc) railway station for a period of five years.

CTN :42635517

20 Nov, 2025 NA

Gurdaspur - Punjab

Tender For supply of basic dimensions , structural elements requirements , design parameters requirement , seismic , temperature range , thermal insulation , acoustic transmission , fire propagation , service life , super structure , upper bracing cross bracing of ms angle 75 x 75 x 6mm length of angle is as follows , lower bracing b shall be placed in the gap of 10 ft below upper bracing in the area covered by the habitat cross bracing of ms angle 75 x 75 x 6mm length of angle is as follows , linear and horizontal bracings all around of section 50x50x6mm length of box bracing for observation post is as follows , measurement , observation post. , side plating for protection , front and rear plating for protection , base plate , top plate above 1. 5 ft air gap. , wire mesh , wpn mounting , foundation , dwarf wall , coping , door , ms plate , single skin insulated false ceiling , main switch with sheet steel enclosure dp with hrc fuses complete with neutral link of capacity 32 amps make and type b havells or bajaj or anchor , wall mounting fan 450mm sweep 230 v complete with inbuilt regulator. make usha or cg or khaitan. , led bulb 12 watt make havells or crompton greaves. , 5 oblique 15 amps switch socket combination 240v along with boards. make anchor or havells or luminous. , piano type switches 5 amps 240v. make anchor or havells or luminous , pvc square box isi mark , flexible cable copper conductor of size 14 obliue 0. 0076. make anchor or havells or finolex. , service cable pvc insulated 10 sq mm 2 core aluminum conductor. make anchor or havells or finolex. , 1. 5 sq mm single core multi stranded copper conductor fr pvc insulated unsheathed. make anchor or havells or finolex. , pvc board 8inch x 10 inch with bakelite sheet. , screw , pvc insulation tape of size 20mm isi marked , pvc casing capping of size 25 mm isi marked. , angle holder, pvc or polycarbonate type. make anchor or havells or finolex. , 2. 5 sq mm single core multi stranded copper conductor fr pvc insulated unsheathed heavy duty cable for 15 amps switch socket power pts. make anchor or havells or finolex. , ceiling rose surface bakelite isi marked with 3 terminal 240 volts. make anchor or havells or finolex. , paints , turpentine oil , brush 50 mm , brush 75 mm , anchorage , ordinary portland cement grade 43 , make acc or ambuja or jk cement or ultra tech , coarse sand , 20mm stone aggregates. stone aggregate , 40mm stone aggregates. stone aggregate , 10mm thick ms plate of size 300mm x 300mm 04 nos , tmt bars fe 500, 12mm dia length 33. 60 mtr , 16mm length 24 mtr , tmt steel bars 16 mm dia bar make tata or sail or jindal , tmt bars fe 500, 8mm dia length 28. 8 mtr for sitrrups , binding wire mild steel soft drawn annealed wire 0. 9mm dia for fastening purpose , nut and bolt 450mm x 16mm with washer , swr steel rope wire 12 mm thick 11 mtr , bull dog grip , turnbuckle , welding rod 25 nos per pkt , ms flat 65 x 10 mm , earthing , lightening conductor

CTN :42490429

14 Nov, 2025 NA

Panchkula - Haryana

Tender For bid to ras supply of excavation , pcc , rcc , shuttering , steel , brick work , plaster , puff panel , ms angel structure , electrical work , door rolling shutter , aluminum window , anti termite treatment and prov for future anti termite treatment , fire sensor , paint job , air turbinor

CTN :42508953

14 Nov, 2025 NA

Panchkula - Haryana

Tender For bid to ras supply of excavation , pcc , brick work , damp proof , plaster , prov and fixing floor tiles , dismentling of existing door and windows , dismentling of existing brick work , prov and fixing puff panels , removing of existing pvc sheet , dismentling of existing pathway shed , fab and eriction of ms angle structure in roof , sand filling , prov and fixing grid ceiling , refing of door and windows , electrification , extn of ac ducting , grid lights 2x2 , prov of computer wiring extn , extn of fire sensors , paint

CTN :42549168

01 Dec, 2025 29.96 Lacs

Bhopal - Madhya Pradesh

Tender For providing and fixing of open gym equipments and jhule at ambedkar park, aradhna nagar park, lumbini park, uncle park, paraspar colony park, and various park of bhopal - providing and fixing of open gym equipments and jhule at ambedkar park, aradhna nagar park, lumbini park, uncle park, paraspar colony park, and various park of bhopal, age group - 6 to 12 yearsefty play area - 14*4 fit, l - 8 fith- 7.5 fit, structure - 50 mm, 32 mm, 25mm od cr pipe, slide - f.r.p. material 4 to 5 mmthick, plate form base - 5x6 mm frp,1.5 ft. would be buried under the ground with cementconcretebase color on iron is primer and then double coat ofcolor (asian paints), premiupremium adults air walker technical specifications length: - 2200mm x width: - 2100mm x height: -1430mm, safe area: -2.0meter x 1.8meter. premium adults air walker equipment made up of b class gi pipe ofdifferent nb. nbstands for nominal boar size i.e. internal diameter of pipe inmillimeters. * make of gi pipewill be of tata, jindal, and swastik. * the main frame structure pipe is80 nb for both side inarch shape. *center handle frame is made up of 25 nb. * footrest gi.pipe is 40nb. *especially design profiles is cuts with plasma cutting. * the pins usedare made up of n 8material 25mm., to build bushes are used are seamless pipe of 60mm od& 6mm thickness.* prime stand supporting bush dia. 125 nb. *main paddle support bearingbush made of g.i125nb. * instruction board- support structure is made up of 1.8 mmthickness ms plate. *peddle movement restricted by specially designed mechanism(interlocking). * instructionsticker printed on petg sheet with uv resistance. * the footrest madefrom aluminum castingmaterial & size is 125 x 305 x 5mm with the support of 250mm x 115mm x3mm thicknessms plate. * the foundation for fixing is structure and made form centerpipe of g.i. of 80 nbwith 40mm x 20mm x 3mm thickness pipe also used. main pipe supportedwith 25mm x25mm ms angle of 3mm thickness. * base plate are made up of ms roundplate 250. *foundation covering cap is made up of frp/roto material of dia. 295mm. *high tensilesteel with galvanized nuts & bolts are used for assembly. * the bearingare used 6205 permanent lubricated bearings & the bearings are used reputed brand(skf/fag). * lockingthe circlips a24 used for assembly. * the powder coating is done withpure polyester powderof ackzonoble or berger with 60 to70 micron thickness., premium adults big turning wheel technical specifications length: - 1450mm x width: - 1930mm x height: -2230mm. * safe area: -1.9 x 1.9 meter. premium adults big turning wheel made up of "b" class gi pipe ofdifferent nb. nb standsfor nominal boar size i.e. internal diameter of pipe in millimeters. *make of gi pipe will beof tata, jindal, and swastik. * the main frame structure pipe is 80 nbfor both sides in curveshape. * the ring frame size is 25 nb made from "b" class of g.i. pipe.* big ring 2 nosconnection link is 25 nb made up of "b" class of g.i. pipe. * wheelconnecting pipe is 32 nbmade of "b" class of g.i. pipe. * the nitrogen hardness pins used aremade up of n 8 25mm.* especially design profiles is cuts with plasma cutting. * to buildbushes are used areseamless pipe of 60mm od & 6mm thickness. * the foundation for fixing isstructure andmade form center pipe of g.i. of 80 nb with 40mm x 20mm x 3mm thick pipealso used. mainpipe supported with 25mm x 25mm ms angle of 3mm thickness. * instructionboard- supportstructure is made up of 1.8 mm thickness ms plate. * instruction stickerprinted on petg sheetwith uv resistance. * base plates are made up of ms round plate 250. *end caps in ssmaterial are used to cover the bushes. * high tensile steel withgalvanized nuts & bolts are usedfor assembly. * the bearings are used "6205" permanent lubricatedbearings the bearings areused reputed brand (skf/fag). * the circlips a24 used for assembly. *the powder coatingis done with pure polyester powder of ackzonoble or berger with 60 to70micron thickness

State Government

CTN :42419032

12 Nov, 2025 NA

Singrauli - Madhya Pradesh

Tender For e-tender for supply of solar system off grid material in the year 2025-26 in all the forest areas under forest division singrauli - laying and jointing pvc pipe. heading, 2kw solar off-grid systemsolar panel type-bifacial panels of 2kw capacity (i.e. 4 panels of min. 590 w) with minimum efficiency of 22% and minimum 25 yrs. warranty (i.e. 4 efficiency>=16% after 25 yrs.)structure type-complete set of structure (hot-dip galvanized ms or anodized aluminum) which can withstand 150 km/h wind speed with minimum 5 yrs. warranty.inverter type-isi marked solar inverter (r-mppt based technology, 95-98% efficiency) with capacity 2.6 kva to 3 kva/48 v min. 05 yrs. warranty.battery type-iec 62619 certified lifepo4 (lithium iron phosphate) battery with capacity 100ah, 51.2v/48v with minimum 5 yrs. warranty.cables-uv-resistant, copper, xlpe insulated, dc: min. 4 sq.mm, ac: as per loadfor all-05 years complete service warranty on site by successful bidderquoted rates should also include cost of all accessories including complete installation, rcc work and wire fitting in whole building with all applicable taxes., 5kw solar off-grid systemrated power of each pv module used- 590 watt and more x 9 panelmodule warrenty- 25 yearswarranty of pcu (inverter)- 60 monthscharger technology- rmpptrated power (kva)- 5nominal battery dc system- 96structure type- galvanised module mounting structurecapacity of poewr plant- 5 kvageneric- acdb, dcdb, earthing and la and other accessories (wire, mcb etc.)battery type- lifepo4 (lithium)battery capacity- 100 ahbattery voltage- 96 voltbattery warranty- 5 yearsnumber of battery- 1solar panel, battery & pcu inverter- all must be of same brand for all- quoted rates should also include cost of all accessories including complete installation, rcc work and wire fitting in whole building with all applicable taxes

CTN :42458928

19 Nov, 2025 NA

Khandwa - Madhya Pradesh

Tender For supply of lab furniture - chemistry lab rack single side- size:- length: 1000mm, depth:150mm, height: 600mm. bottle rack structure made up of prime quality ms cold rolled close annealed sheet 20g & 22g thk3 fold press form side panel withdia 9mm holes in each panel throughout the height at 25mm pitch for adjustability of shelves. all steel components are epoxy powder coated after seven tanks anti anti-corrosion treatment of the surface. powder coating thk. 50-60 micron., lab stool-/ drg. stool - specification size h: 710, seat: h:550-,b:300, under structure:- made up of ms cold rolled closed annealed, 18g tube. the topis made of 18 mm-thick pre-laminated particle. size edges covered with teak wood beading, duly polished. all steel components are epoxy powder-coated coated followed by aseven-tank anticorrosion treatment of the surface., lab corner table- size :- w:600mmxd:600mmxht:900mm. the frame is made of ms cold-rolled, close annealed tube, vertical leg made of 25x25x18g(1.2mm), and horizontal tie member made of 25x50x18g(1.2mm). top made of black granite 17mm thk and black granite supported on fibre cement board 10 mm thk. all steel components are epoxy powder-coated after seven tanks of anti-corrosion treatment of the surface. powder coating thk50-60 microns,, almirah- al-01- size:-height:1980mm, width:910mm, depth:485mm body part made up of prime quality cold rolled close annealed sheet. use only mig/tig & spot welding for fabrication.4 adjustable shelves. three-way locking device with six levers superior quality lock for the door. doors are mounted on steel hinge brackets. body 22 gauge, door 20 gauge. all steel components are epoxy powder coated, followed by seven tanks anti anti-corrosion treatment of the surface., glassdoor almirah- al-02gd- size:-height:1980mm, width:910mm, depth:380mm. body part made up of prime quality cold rolled,close-annealed sheet. use only mig/tig & spot welding for the fabrication of 5 adjustable shelves. three-way locking device with six levers superior quality lock for the door. doors made of press-formed ms cold-rolled close annealed sections with 4mm glass. doors are mounted on steel hinge brackets. all steel components are epoxy powder coated, followed by seven seven-tankanti-corrosion treatment of the surface.

CTN :42483071

12 Nov, 2025 27.62 Lacs

Phalodi - Rajasthan

Tender For supply and fixing of recycled plastic proudcts for west to wonder park at major shaitansingh stadium phalodi - fabrication, supply, and installation of hanuman ji sculpture made from scrap metal and ball bearings, having an approximate height of 7.5 to 8 feet and weight between 550 to 650 kg, including the following technical components and works: structure made using ms angles 40x40x5 mm, round bars 12 20 mm, and ms sheet scrap and bearings welded to form the outer contour. full welding, grinding, and finishing of all joints to ensure smooth surface without sharp projections. application of anti-rust red oxide primer and metallic weather-resistant enamel paint on the complete sculpture. excavation for foundation up to 1.5 ft depth, pcc work (1:2:4) for base, and ms base plate 10 mm thick with m16 foundation bolts. complete fixing and erection at site, including all tools, tackles, and safety measures. ( 7.5 - 8 feet), fabrication, supply, and installation of dancing girl sculpture inspired by harappan civilization, made entirely from scrap metal and recycled components, having an approximate height of 7.5 to 8 feet and overall weight between 550 to 650 kg, including the following: structural framework fabricated using ms angles 40x40x5 mm and round bars 12 20 mm, designed to maintain the proportion and balance of the sculpture. outer surface formed using assorted ms scrap parts, metal sheets, and ball bearings, fully welded and ground to a uniform profile. application of anti-rust red oxide primer followed by metallic weather-resistant paint for long-term corrosion protection and uniform surface finish. foundation and fixing work comprising earth excavation up to 1.5 ft, pcc base (1:2:4), ms base plate 10 mm thick, and m16 foundation bolts for permanent anchoring. includes complete onsite erection, alignment, and welding/bolting work with all required tools, tackles, and safety precautions, fabrication, supply, and installation of gabion artwork forming the letters hmc , constructed using scrap iron rods and mesh structure, with infill of c&d waste pebbles or stone aggregates, including the following technical components and works: overall height of 3 to 4 feet and width of approximately 3 feet per letter, with a combined structure weight of around 600 kg. frame made of ms rods ( 8 12 mm) and ms angle 35x35x5 mm, fabricated into gabion-type wire mesh boxes forming the letter contours. internal filling with c&d waste pebbles or similar size stones (40 80 mm) compactly placed to ensure structural stability and visual consistency. base support work including pcc (1:2:4) or rcc base slab (m20 grade) depending on site condition, ensuring level and load-bearing surface. complete fixing and installation at site, including alignment, welding, and anchoring to base using suitable foundation bolts. anti-corrosive coating (red oxide primer and enamel paint) on all exposed metal members for rust protection. work includes all materials, labour, tools, and equipment required for fabrication, transportation, and installation as per standard engineering practices., fabrication, supply, and installation of sheep sculptures made using stone bodies with scrap metal heads and legs, designed as waste-to-art installations, including the following components and works: overall height of each sculpture approximately 2 feet, with a total weight of 200 300 kg per unit. body constructed from natural stone blocks (granite/sandstone) shaped and finished to the required contour using mechanical cutting and polishing tools. head and legs fabricated from ms scrap parts, rods, and plates (thickness 3 5 mm), welded and ground to achieve defined shapes, integrated securely with the stone body through embedded anchor rods ( 12 mm) and metal adhesive bonding. all metal components coated with red oxide primer followed by weather-resistant enamel paint for rust protection. foundation and placement work including pcc bed (1:2:4) for each sculpture to ensure

Galvanizing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

State Government