Latest garage equipment Tenders | Government garage equipment Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

CTN :45686658

02 Jul, 2026 3.47 Lacs

Mananthodi - Kerala

Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

Central Government/Public Sector

CTN :45178202

30 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

State Government

CTN :45636157

03 Jul, 2026 NA

Karur - Tamil Nadu

Tender For annual rate contract for procurement of auto garage equipments spares- hourmeter 12v make:yenkey-electronics-615091020001, tc oil filter element - ek3246 elofic / pi 441800., master cyl. assy.(tandam)-p.no.:29066698, make:bi, wheel cylinder lh - part no. 64677953 -tvs girling, wheel cylinder kit - mi no.64967159,make: tvs-bt, universal joint kit-part.no.112007 - xlogwb/gogo / model gx 20, oil filter element for bolero jeep make: purolator - pi-170300 / pi - 530500, air pressure gauge - p. no. : 2150 make : pricol, engine oil pr. gauge ( 0-7 kg/cm2 ),make - pricol - p.no: 2017, ammeter - part.no. 4035 / 40005 make: pricol only, diaphragm p.no. : 843 310 make : tvs-wabco, spring - p. no. : m 843300 make : sundram clayton, seal assy p.no. m-841000 make: sundram clayton, elgi air horn asy.-make:elgi,model:std-p.no:s09101, unloader valve -m301910 hm - 81011976 make : s.c., radiator cap, small 7 lbs - part no.ho-103, make : hold on / sippy brass type, radiator cap - big size 69mm dia filler neck, shim for pinion nut 24v self motor 9030-896, pinion & bearing assy.24v 11 teeth - 9030-859 aa, clutch outer plate for 24v self motor 9030-951 a, clutch inner plate for 24v self motor 9030-876 b, pressure plate for clutch 24v self motor 9030-623, plunger assy for armature 24v self motor 9030-298a, field coil(main) for 24v self motor 9030-51, solenoid switch assy for 24v self motor 267-4a, field coil (aux.) for 24v self motor - 9030-52a, carbon brush for 24v self motor - 9030-644, brush carrier assy for 24v self motor - 9030-77, c.e. shield assy for 24v self motor - 9030-76, thrust washer for armature 24v self motor-9030-237, bearing bush for de shield p.no:9030-693 (:make: lucas-tvs / kirloskar/ menon), oil seal-de shield assy24v selfmotor9030-808pos3850, packing washer (namada)24v self motor 9030-1241 ( 1 packet consist of 50 nos ), field connector for solenoid 24v - 9030-932, positive connector for solenoid switch - 9030-930, moving contact for solenoid switch 24v - 9030-1190, horn assy 24 with condenser vibersonic 21 -v c/fht (make : roots ), point set-12v/ 24v roots make horn vibrosonic type, carbon brush for 8" remi coach fan (type: c.f.-20), regulator assy 24v alternator - p.no. 26938063 a, brush assy for 24v alternator 9030-340, brush box assy for 24v alternator 9030-315a, fan assy for 24v alternator 9030-683, heat sink assy (aux) 24v alternator 9030-1603b, heat sink assy.negative-24v alternator- 9030-1939, de shield for 24v alternator - 9030-1688 d, fixing screw for de shield alternator - 9030-382, wiper blade - 81001915 , battery terminal positive-brass, stp type, battery terminal negative make : shanco, stp type, regulator for 12v alternator - 26214575, bulb no 67,12 v, bulb halogen 12v-60/55w make:mico bosch no. 99510300041, pull & push switch - make : minda / hella long thread, ignition key switch - part.no. j-1019 - make : jay, starter button brass body with sealed rubber boot type - make :pricol ,part no: 3516, head light switch 24v- part.no. 6rd922504-make:pmp, head light holder - hp 1656 make: harson, head light assy. - part. no. : vsh-1431 / vsh-1432, make : vasko, 03 pin type, lucas type (02 nos. per set) ( make: anl-lux, mahindra di round: 81-5124), bulb 24 v-21w -pin type no:2441, bulb no.67, 24 v, allite p.no.t-711, bulb head light halogen 24 v 100/90 w collar type, electronic flasher unit - 24v - make: hella, copper ring terminal 50 sq.mm non insulated-7137, wire 4mm size: 32 / 0.2,max od : 1.95mm, finolex make, wires 5mm size:28/0.3, max od : 2.55mm, finolex-make, wires 6mm size:35/0.3 , max od : 2.75mm, finolex make, wires 8mm size:65/0.3, max od : 3.9mm, finolex-make, main bearing 010 u/s p.no:f0218210 make:bm copper, main bearing thrust washer(std-size) make: kir/ bm, tappet p.no: f4330022 make:al, connecting rod bearing-std size make:bimetalcopper, con. rod bearing 010 u/s, make :bm copper ., cylinder liner-hardened- 10 o/s make :liners india (1set = 6 nos), piston with pin and circlip (al - 401) make : ipl

CTN :45606975

02 Jul, 2026 NA

Multi City - Maharashtra

Tender For supply and delivery of bs vi compliant 3 nos of breakdown vehicles with garage equipments for ex engtr es under dyche swm transport

State Government

CTN :45585472

22 Jun, 2026 2.00 Lacs

Multi City - Telangana

Tender For 4th call - procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub division no.4, pdpl, id4 manthani of ic-pdpl, peddapally district - supply of torch light (make: philips) multi functional long range with rechargable with 1 year warranty and 1 year extended warranty as directed by the engineer-in-charge. , supply of tool kit spanner set ring spanner 6-32 (make: taparia) as directed by the engineer-in-charge. , supply of sluice operating handle ( 1 small & 1 big for medium gear boxes for dps & ots) as directed by the engineer-in-charge. , supply of sickles/ kodavali (make:tata) as directed by the engineer-in-charge. , supply of shovel (make: tata) 10 number 1.8 kg as directed by the engineer-in-charge. , supply of safety helmet isi(make:karam) as directed by the engineer-in-charge. , supply of rain coats (make:zeel) as directed by the engineer-in-charge. , supply of platic big gamela (make:srp gold/pooja) as directed by the engineer-in-charge. , supply of nylon rope 16 mm yellow (30 metre) (make:cheeta) 24 kgs weight as directed by the engineer-in-charge. , supply of measuring tape 30m isi(make: freemans) as directed by the engineer-in-charge. , supply of hand gloves electric shock proof as directed by the engineer-in-charge.( for 11 kv including 13.615% contractor profit). , supply of hammers( make:tata) 2 lb weight as directed by the engineer-in-charge. , supply of gum boot safety steel toe double colour(make: big elephant) as directed by the engineer-in-charge. , supply of grease gun 5 kgs (make:capson) as directed by the engineer-in-charge. , supply of crow bar (make;tata) 25 mm as directed by the engineer-in-charge. , supply of cotton waste per kg as directed by the engineer-in-charge.( each lascar - 10 kgs) , supply of chain saw 22" petrol (make: forte ) (with 6 months warranty for bore & piston) as directed by the engineer-in-charge. , supply of axe with wooden handle (make: tata) 1400 grams weight (min supply of 1 box i.e. 12 pieces, no loose) as directed by the engineer-in-charge. , supply of 2hp 4 stroke grass cutter/brush cutter umk 450 t (make: honda) (with 1 year warranty for bore & piston) as directed by the engineer-in-charge

CTN :45559274

29 Jun, 2026 29.22 Lacs

Multi City - Karnataka

Tender For supply, installation and commissioning of minor garage equipments on turnkey basis - bench grinder 1/2 hp, bench-vice 10 inches, bench-vice 12 inches, chain pulley block 1 ton capacity, bench-vice 8 inches, drill gun 13mm, drill gun 6mm, hydraulic trolley jack 10 ton capacity, alternator and starter test bench, brake liner riveting machine, digital tyre pressure gauge

Garage Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector

State Government

State Government