Latest garden tools Tenders | Government garden tools Tenders

CTN :45690008

09 Jul, 2026 NA

Rewari - Haryana

Tender For providing of custom bid for services - rate contract for supply of hygiene and sanitation items - acid normal 1 itr, roff cera clean all, purpose tile, floor & wall, cleaner 1 liter pack, all out machine with liquid, all out refill bottle (single), battery volt for mic, black hit flying insect killer-mosquillo & fly killer spray (625), bleaching powder, brasso 200ml (, brasso 500ml (liquid), broom soft (phool jhadu), broom stick (seenk jhadu), brush toilet cleaning, bucket plastic for toilet sitr, and specification, cell aa 1.5 (remote etc), cell aaa 1.5 (wall clock etc), cleaning cloth pocha size , cleaning cloth pocha size, - standard 2ft x211, cleaning cloth pocha size, -standard 3ft x3ft, and specification, cloth for dusting size-, 16x16 inch, colin glass and surface cleaner liquid spray -500 ml, detergent powder 1 kg, handwash liquid 200 ml bottle, handwash liquid 5 ltr, floor mat jute heavy duty thickness 3 cm, size 60x90 cm, floor mat jute thickness 3 cm, size 45 * 75 cm, footmat rubber 1.5 ft x 2.5 ft (waterproof, non-slip, rubber hollow), gloves rubber for safaiwala, herbicide liquid for weed control for all crops 500 mi, lethal liquid for 1 lir, pesticide to controls termites, borers & fungus in buildings (1 ltr)., hand sanitizer 200 ml, harpic liquid 500ml, juna tron, plastic juna (nylon scrubber) (pack of 6), lizol 500ml, malathion liquid 1 ltr, mask for mouth (pack of 100), mug plastic good quality. durable, with handle (1.5 ltr), naphthalene ball 200 gm pkt, air freshner blocks 50g, leather face tissue box, napkin 100 sheet, multi-purpose flat mop for dry & wet cleaning (61 inch long), dry mop reffil, microfiber dry mop set, microfiber dry mop reffil, dental kit for vip guest room, shaving kit for vip, guest room, mens rubber bathroom sleeper, comb, body wash 20 ml, body lotion 20 ml, shampo 20 ml, foam sealant spray while 750ml (multipurpose expanding foam spray for gap filling, crack & hole repair), bearing grease (0.5l), blody wash gel 5l-refill bath gel for guest house, nitrile disposable gloves standard size (pack of 100 piece), small garbage bags 5 litre capacity (43-48 cm) (30 bags), heavy-duty garden spade with flat blade & wooden handle-industrial grade belcha for digging, shoveling & agricultural work, garden trowel-1 pc, metal blade, ergonomic handle, heavy-duty transplanting & digging hand tool for indoor, balcony & outdoor gardening, gardening tools, car wash shampoo 5 liter, liquid wax to restores car paint gloss and lustre, water repellent, uv protection (200ml, pack of 1), empty hand wash, dispenser bottle

Central Government/Public Sector

CTN :45098425

25 Jun, 2026 NA

Koraput - Odisha

Tender For bid to ras corrigendum : tender for supply of supply of tools from hal provided technology d d m - screw jack lifting device , device for lifting , fixture for lifting , fixture for lifting , device for lifting , fixture for lifting , fixture for hoisting , fixture for lifting , engine lifting tackle , technological hook , fixture for lifting

State Government

CTN :45412757

23 Jun, 2026 NA

Vadodara - Gujarat

Tender For purchase advertised tender of tools and tackle as per guvnl circular for all s/dn under vishwamitri west (o&m) division

State Government

CTN :45412873

23 Jun, 2026 NA

Vadodara - Gujarat

Tender For purchase advertised tender of tools and tackle as per guvnl circular for all s/dn under vishwamitri west (o&m) division.

State Government

CTN :45412895

23 Jun, 2026 NA

Vadodara - Gujarat

Tender For purchase advertised tender of tools and tackle as per guvnl circular for all s/dn under vishwamitri west (o&m) division

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

Corporations And Associations And Others

CTN :45328794

11 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For corrigendum : providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be mor

Central Government/Public Sector

CTN :45177877

03 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For corrigendum : biennial load testing contract of all tp equipments (lifting tools tackle,lifts) of rls chp

State Government

CTN :45209177

29 May, 2026 43.51 Lacs

Tapi - Gujarat

Tender For corrigendum : dismantling of existing hr service gates and providing, fabricating, erecting new gateleafs, main roller assemblies, guide roller assemblies, motorized hoist and underwater welding, cutting, chipping work in hr well, etc complete including cetc complete including cost of materials, labour, gas cutting, welding, machining, tools, tackle, scafoldings, painting for jhuj irri. project.

State Government

CTN :45209183

29 May, 2026 48.41 Lacs

Tapi - Gujarat

Tender For corrigendum : dismantling of existing hr emergency gates (2 nos.) and providing, fabricating, erecting new gateleafs, main roller assemblies, guide roller assemblies, underwater repair with welding, cutting, chipping activities in hr well, etc complete including costetc complete including cost of materials, labour, gas cutting, welding, machining, tools, tackle, scafoldings, painting for jhuj irri. project.

Garden Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors