Latest gardening equipment Tenders | Government gardening equipment Tenders

CTN :45388756

20 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of providing and fixing surf board size 1150x900x1250mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of virgin lldpe plastic by rotational moulding with minimum 4mm thickness, uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearing should be used in the equipment’s manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in- charge. the equipment shall be fitted within built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), providing and fixing rowing machine of size 1280x800x1150mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strenght m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material,shape of equipment, colour (of metal, seat and pedal), providing and fixing sky walker of size 850x800x1800mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum

State Government

CTN :45558226

22 Jun, 2026 34.31 Lacs

Chamba - Himachal Pradesh

Tender For tender for prov. and fixing of equipment / material , design, erection, testing , commissioning for sop to jsv for inspection hut at cheel bangla chowari by prov. 11/0.4 kv 100 kva dtr along ht, lt line in es chowari-ii (u) esd chowari ed dalhousie - (a) supply part-11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 220kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(2 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 1 no., ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, g.i. wire for earthing, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles 300 mm sq., copper thimble 200 mm sq., danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-185mm sq., alluminium paint, prov.acsr, 6/1/3.35 mm, chain link fencing , angle iron, gate etc. for transfromer fencing, prov. transformer bed plinth for 1x400kva s/stn structure complete with cc 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing., lt switched caapcitors 36-kvar for 100 kva dtr, trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)., supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)., fine dressing of the ground., spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)., supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : screened through sieve of i.s. designation 20 mm, filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)., providing and fixing korean grass turf superior qualitywith earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

State Government

CTN :45492201

18 Jun, 2026 38.78 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing open gym equipment for play ground and maintenance of shamshan sthal boundary wall and kutte home work in village - ahmadpur choroli , yea wc-06

CTN :45348237

12 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : providing of customized annual maintenance contract/cmc for pre-owned products - comprehensive annual maintenance contract of airport ground service equipment gse at iaf, palam, new delhi from oem/ oem authorized distributors for : (1) camc for toyota make tugs (model 02-td25) - qty 3 nos; toyota; comprehensi..

CTN :45419916

24 Jun, 2026 NA

Burdwan - West Bengal

Tender For supply of ground equipment d d - dolly propeller , prier, portable propeller , fuel preservation system , 8cyl n2 trolley , aft cargodoor adapter , jacking system portable 35 ton , jack hydraulic tripod 10 tons , tow bar aircraft , purging unit, air , cradle ground handling , heater duct type portable , lavatory service cart , dec dolly for ground equipment , gtc dolly assembly , crash trolly , filter and bleeder hydraulic system , maintenance ladder type-2 , maintenance ladder type-3 , total aircraft wash system , articulating staircase mx stand type-ii , suselage support creadle , wing shoring

CTN :45359010

19 Jun, 2026 NA

Ernakulam - Kerala

Tender For providing of customized amc/cmc for pre-owned products - 72 by type electrical ground support equipment and sttes; --; annual maintenance contract (amc); as per scope of work; yes

Central Government/Public Sector

CTN :45325796

15 Jun, 2026 NA

Dehgam - Gujarat

Tender For supply of grain grocery , fresh vegetables and fruits , grain milling , sweets/bakery/snack items , ro plant. annual maintenance contract , cleaning items , photocopy work , tuck shop , toilet items , electrical and plumbing items , color work , hair cutting , iron work wages/materials , annual maintenance contract for cctv camera, hiring of pandal/decoration material , hiring of tractors, jcbs, rotavators and other equipment for ground cleaning and repair work. , sale of used computers, computer accessories and other accessories , selling old newspapers , empty oil cans, and other scrap materials , stationery items , annual maintenance contract for computers, tablets and any other computer-connected devices , etc.

CTN :44896502

28 May, 2026 NA

Goa - Goa

Tender For bid to ras providing of customized amc/cmc for pre-owned products - annual maintenance contract (amc) of ground support equipment (gse) for one year at inas 310; annual maintenance contract (amc) of ground support equipment (gse) for one year at inas 310; annual maintenance..

Central Government/Public Sector

CTN :45137990

27 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.

Gardening Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector