Latest gas control valve Tenders | Government gas control valve Tenders

Central Government / Public Sector

CTN :44609161

21 Apr, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : procurement of m/s roto pumps ltd make spares - gland, pn-14, pump, complete unit with motor, safety relief valve assembly, screw with timing gear driven screw,p/n-27,moc: aisi 420 - 1 no key for timing gear - 2 nos timing gear,p/n-31,moc: en 36 - 2 nos driving screw,p/n-26,moc: aisi 420 - 1 no, stuffing box,p/n-2

Central Government / Public Sector

CTN :44846197

24 Apr, 2026 NA

Panipat - Haryana

Tender For supply of valve :safety , pressure - item no. 10 sap code 8350274402 , item no. 20 sap code 8350274432 , item no. 30 sap code 8350274412 , item no. 40 sap code 8350274442 , item no. 50 sap code 8361881142 , item no. 60 sap code 8361881152 , item no. 70 sap code 8350274462 , item no. 80 sap code 8350274472 , item no. 90 sap code 8350274452 , item no. 100 sap code 8360090124

Central Government/Public Sector

CTN :44875801

23 Apr, 2026 NA

Belgaum - Karnataka

Tender For supply of 1210914084 safety valve for chiller 160 tr , nut , bolt , washer , screw

Central Government And Public Sector

CTN :44850394

01 May, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of 86 items of is group c002 - pressure guage, plug for regulator unit for aga divator, cover, holder, locking strap, spiromatic test, diaphragm, stop ring, hand wheel cover for cylinder pack for aga divator, spacing washer, cap, valve slug assy for cylinder valve for aga divator, gland seal, shield ring for breating valve with safety pressure, gauge hose, guide pin, lever, retaining plate, sealing sleeve, connection nipple, center spindle, lifting spindle, cover, relief valve spring, hand wheel cover, protective ring, spring, handle assy for 3 3 4 och 4l, safety plug 300 bar, piston, spring, guide buishing, plug, valve guide, valve cone, quick coupling connection, drain button, washer, sealing spring, holder, nut, balancing diaphram, retaining ring, head hardness, spacer, push pad, relief valve piston, adjusting nut, screw, blank cover grery, valve connection assy, valve cone assy, o ring 5-pack, o ring 10-pack, o ring 10-pack, o ring 3 1x1 6 10 pack-pack, screw 10 pack, circlip 10-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, burst disc rubber plug 10-pack, sealing piston assy, inner mask assy grey, screw 10 pack, o ring 8 1 x 1 6 10-pack, valve housing assy, level assy, regulating house, valve insert assy mkii w sp, complete counter pressure mki, pressure equalizing pad, regulator unit c w pressure, o-ring 10 pack, o-ring 10 pack, low volume visor, innermask, strap lovk, o-ring, screw, o-ring, divator mask gr nr sp face mask w breath valve, set of special tools and test equipment for is mix, diver panel dive control no comms with shut-off valves, weight pocket, aga bcd jacket with backplate rail inflator cylinder

CTN :44875973

04 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of snep nut , joint , joint , joint d116/76x1.2t reinz-s.s , joint d172/116x1.2t reinz ss , gasket , gasket , safety valve , driving pinion , driving pinion , seal bearing housing , dearation t.b outlet connection , o ring , flexmaster conn (pipe-60.3mm-od) , hydraulic governor woodward pga12 , sensor md2r-ck-80-18x1.5-90-0.6-f2c , sensor md2r-ck-80-18x1.5-90-18.f2d , exhaust manifold std section lagged , end section t.b.side , clamping collar , clamp , exhaust manifold with diaphragm for cyl.b8 , o ring , o ring , joint , joint , addesive super cya no.495 , sensor for bearing temp , thermostat element 35/42 deg c , seal kit 35/42 deg c , air cooler outlet conn.hose , fuel pump inlet conn. , fuel leak conn.from ss valve , level switch overflow conn. , fuel feed pump discharge conn. , ss valve air inlet conn. , starting air conn.inlet , connection for pre lub oil suction , connection for pre lub oil pump , engine inlet pressure connection , fresh water air cooler inlet connection , intake pressure connection , by pass valve closing control connection , pressure gauge 80 dia 0 to 4 bars , pressure gauge 0-6 bars , pr. switch , 4140-c-k-1-e-21-aa0 , 2.7b , pr. switch , 4140-c-k-1-e-22-aa0 , 4.1b , pr. switch , 4140-c-k-1-e-22-aa0 , 4.6b , pressure transmitter p5r-6bar-4-20-1/2-pe , pressure transmitter p5r 0-40 bar , indicator temperature , mss module 0-100deg.c 4-20 temp conv. , temperature indicator q72-240 , 100deg.c , shaft speed indicator , solenoid valve (nomo-24 vdc) , capillary thermometer 100mm dial 150deg. c , pneu p.b. pneu return red , fuel rack converter , press.gauge 0-10 bar , crankcase pressure measurement assly , fuel filter , connecting straub metal grip d42.4 epdm , gasket , injection pipe , pinion on crankshaft , bearing shell , drive for barring gear , rubber compensator g0200 x 130 x 016 hks-g nbr gr deb , joint , filter regulator , silencer pads (fx4000) , time delay relay(on delay) , illuminated blue push button 2no , fuse 10x38 6a gg , solenoid valve-24v , 2 lips oil seal , bearing , o ring , o ring - kalrez , inlet valve guide , exhaust valve guide , gasket exhaust manifod , inner spring , outer spring , piston ring - top - chrome , ceramique , piston ring - compression-g3-chrome , seal , temp sensor , resilient mounts , fan+grille , selector switch 2 positions ino , selector switch 2 positions withdrawal from 3no , manometer 0-10 bar , flashing light , hooter (electronic) , power switch , bi polary fuse holder , fuse 10x38 2a gg , relay , pt 100 converter with two threshold , gal vanic insulator , solenoid valve-safety stop , pressure switch , atp thresholds temperature card , aip , human machine interface

CTN :44882125

22 Apr, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, bobrmn1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079617706 boxnr [2] er 72029660404 bobrnm1 [3] ser 10079666960 boxnm1 [4] nr 30038961066 bcnm1 [5] cr 30019060320 bcnm1 [6] er 30029020147 bcnm1 [7] cr 30019160457 bcnm1 [8] ser 30079160251 bcnm1 [9] er 30029125682 bcnm1 [10] ser 10079646511 boxnm1 [11] ser 10079662764 boxnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (132.180 mt) is the lot quantity (132.180 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowedinside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnm1 & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :44882287

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

CTN :44875043

04 May, 2026 NA

Guna - Madhya Pradesh

Tender For supply of pressure control valve 2in 600# , self actuated pressure reducing valve 3in 900# , pressure safety valve, 1.5 x2in, 900x300# , shut down valve 4in 600#

CTN :44483231

17 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of safety relief valve psv-01 , safety relief valve psv- 02 , safety relief valve ipsv-01 & ipsv-02

CTN :44867775

22 Apr, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - lot no. c/elst/m5/12/28, srl. no. (1) released air brake hose coupling for brake pipe (bp) , qty.- 200 nos. , total weight - 500 kgs. (fe-200 kgs & nvd- 300 kgs) , udm ledger no.- 002 srl. no. (2) released hose coupling for feed pipe (fp) , qty.- 200 nos. , total weight - 500 kgs. (fe-200 kgs & nvd- 300 kgs) , udm ledger no.- 002 srl. no. (3) released hose coupling 1"(mrep) lh , qty.- 50 nos. , total weight - 150 kgs. (fe-75 kgs & nvd- 0 kgs) , udm ledger no.- 002 srl. no. (4) released 1¿ angle cock (ball type) with vent , qty.- 103 nos. , total weight - 303 kgs. (fe-303 kgs & nvd- 0 kgs) , udm ledger no.- 008 srl. no. (5) released hose coupling 1" (dbr) rh , qty.- 50 nos. , total weight - 165 kgs. (fe-75 kgs & nvd- 0 kgs) , udm ledger no.- 002 srl. no. (6) release wiper blade assembly , qty.- 34 set , total weight - 136 kgs. (fe-136 kgs & nvd- 0 kgs) , udm ledger no.- 007 srl. no. (7) release wiper blade assembly , qty.- 381 nos. , total weight - 44.8 kgs. (fe-44.8 kgs & nvd- 0 kgs) , udm ledger no.- 007 srl. no. (8) ¿ safety valve ftil , qty.- 32 nos. , total weight - 12 kgs (fe-12 kgs & nvd- 0 kgs) , udm ledger no.- 001, over-all total weight- 1810.8 kgs. (total fe- 1045 kgs & total nvd- 765 kgs.)

Gas Control Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector