Latest gas management system Tenders | Government gas management system Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government And Public Sector

CTN :45609400

29 Jun, 2026 19.50 Lacs

Ajmer - Rajasthan

Tender For supply of visit charges to attend fault of dea set , general servicing of the up to 20 kva dea sets , general servicing of more than 20 kva and upto 32.5 kva dea sets , general servicing of more than 32.5 kva and up to 55 kva dea sets , replacement of diesel filter element set 1 ltr , replacement of oil filter element 1 by 2 ltr , replacement of oil filter element 1 ltr , replacement of diesel filter element set 1 by 2 ltr , replacement of oil filter set suitable for ea set of 50 to 55 kva , replacement of lubricating oil multi grade 20w40 , replacement of steel wire braided fuel pipe line , replacement of stop solenoid 12 volt , replacement of starting key with switch , replacement of battery leads red and black , replacement of coolant for radiator of superior quality , replacement of v belt , replacement of hose pipe set with clips , replacement of fuel feed pump assembly , replacement of solid state smps or scr based battery chargers , replacement of push button switch for start or stop or reset , replacement of 12 v dc or 220 v ac hr meter counter type , supply and fixing of 12 volt battery operated self starter , repairing and general servicing of the existing faulty radiator up to 55 kva , pdg general servicing and repairing of 12 volts engine starting self , labour charges for top overhauling of existing dea sets up to 20 kva , replacement of the liner assembly with rubber ring dea sets up to 20 kva , replacement of the piston set without piston ring set dea sets up to 20 kva , replacement of the piston ring set dea sets up to 20 kva , replacement of the set of gasket including head gasket dea sets up to 20 kva , replacement of the o ring set dea sets up to 20 kva , replacement of the cr bearing dea sets up to 20 kva , replacement of the main bearing dea sets up to 20 kva , replacement of the oil pressure guage dea sets up to 20 kva , replacement of the front oil seal of crank shaft dea sets up to 20 kva , replacement of the back oil seal of crank shaft dea sets up to 20 kva , repairing of cylinder head , transportation charges for alternator of various capacity up to 55 kva up to 50km , rewinding of main stator winding of alternator up to 20 kva , rewinding of main rotor winding of alternator up to 20 kva , exciter stator winding of alternator up to 55 kva , exciter rotor winding of alternator up to 55 kva , replacement or repairing of avr , replacement or repairing of bearing suitable for above 20 kva alternator , providing of 2 core 16 sqmm , providing of 4 core 16 sqmm , laying of one no upto 35 sq. mm on wall surface , laying of one no upto 35 sq. mmin the existing rcc or hume or metal pipe , supply and making end termination for 4 x 16 sq. mm 28 mm , sitc of 63 amps 2 pole on load side handle operated change over switch , sitc of 63 amps four pole on load side handle operated change over switch , providing and fixing 63 amp tpn disconnector fuse switch unit , repairing of fuel injection pump fip, nozzle and injectors , sitc of 12 volt 88ah lead acid maintenance free battery

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

Central Government And Public Sector

CTN :45468915

20 Jun, 2026 40.44 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : supply of supply of 1.5tr inverter ductable ac as per bsnl specifications , itc of 1.5 tr inverter ductable ac as per bsnl specifications , supply and fixing copper piping of 0.25 inch and0.5inch with nitrite foam insulation as required , supply and fixing powder coated heavy duty ms stand , supply and fixing upvc pipe 25mm dia, 2mm thick , supply and fixing upvc pipe 40mm dia, 2mm thick , supplying and laying pvc insulated frls copper cable 3x1.5sqmm , supplying and laying pvc insulated frls copper cable 3x2.5sqmm , supplying and fixing dp enclosure with dp mcb , supply and fixing 5a to 32 a sp mcb in extg db as required , supplyinstalling,balancingand commissioning gss sheet ducting 0.63mm thick , supplyinstalling,balancingand commissioning gss sheet ducting 0.80mm thick , providing and fixing supply air grills powder coated , providing canvass connection

CTN :45573130

01 Jul, 2026 NA

Jalpaiguri - West Bengal

Tender For spare parts,garage works fitting and fixing for repairing - laying and jointing pvc pipe. heading, a.c pump diaphramvehicle model - enfield bullet 350 ccmake by - carter/ucal, a.c pump diaphramvehicle model - hero hondamake by - carter/ucal, a.c pump diaphramvehicle model - boleromake by - carter/ucal, a.c pump diaphramvehicle model - mm max make by - carter/ucal, a.c pump diaphramvehicle model - tata sumo goldmake by - carter/ucal, a.c pump diaphramvehicle model - tata sumo spacio/grand /victa make by - carter/ucal, a.c pump diaphramvehicle model - sml isuzu make by - carter/ucal, a.c pump diaphramvehicle model - tata 407make by - carter/ucal, a.c pump diaphramvehicle model - tata 709/mini busmake by - carter/ucal, a.c pump diaphramvehicle model - tata 712 mini busmake by - carter/ucal, a.c pump diaphramvehicle model - big bus/tata 1210make by - carter/ucal, a.c pump diaphramvehicle model - big bus/tata 1510make by - carter/ucal, a.c pump rep kitvehicle model - enfield bullet 350 ccmake by - carter/ucal, a.c pump rep kitvehicle model - hero hondamake by - carter/ucal, a.c pump rep kitvehicle model - boleromake by - carter/ucal, a.c pump rep kitvehicle model - mm max make by - carter/ucal, a.c pump rep kitvehicle model - tata sumo goldmake by - carter/ucal, a.c pump rep kitvehicle model - tata sumo spacio/grand /victa make by - carter/ucal, a.c pump rep kitvehicle model - sml isuzu make by - carter/ucal, a.c pump rep kitvehicle model - tata 407make by - carter/ucal, a.c pump rep kitvehicle model - tata 709/mini busmake by - carter/ucal, a.c pump rep kitvehicle model - tata 712 mini busmake by - carter/ucal, a.c pump rep kitvehicle model - big bus/tata 1210make by - carter/ucal, a.c pump rep kitvehicle model - big bus/tata 1510make by - carter/ucal, a.c. pump fexible pipevehicle model - enfield bullet 350 ccmake by - t.p.l, a.c. pump fexible pipevehicle model - hero hondamake by - t.p.l, a.c. pump fexible pipevehicle model - boleromake by - t.p.l, a.c. pump fexible pipevehicle model - mm max make by - t.p.l, a.c. pump fexible pipevehicle model - tata sumo goldmake by - t.p.l, a.c. pump fexible pipevehicle model - tata sumo spacio/grand /victa make by - t.p.l, a.c. pump fexible pipevehicle model - sml isuzu make by - t.p.l, a.c. pump fexible pipevehicle model - tata 407make by - t.p.l, a.c. pump fexible pipevehicle model - tata 709/mini busmake by - t.p.l, a.c. pump fexible pipevehicle model - tata 712 mini busmake by - t.p.l, a.c. pump fexible pipevehicle model - big bus/tata 1210make by - t.p.l, a.c. pump fexible pipevehicle model - big bus/tata 1510make by - t.p.l, a.c. pump gaskit packingvehicle model - enfield bullet 350 ccmake by - carter/ ucal, a.c. pump gaskit packingvehicle model - hero hondamake by - carter/ ucal, a.c. pump gaskit packingvehicle model - boleromake by - carter/ ucal, a.c. pump gaskit packingvehicle model - mm max make by - carter/ ucal, a.c. pump gaskit packingvehicle model - tata sumo goldmake by - carter/ ucal, a.c. pump gaskit packingvehicle model - tata sumo spacio/grand /victa make by - carter/ ucal, a.c. pump gaskit packingvehicle model - sml isuzu make by - carter/ ucal, a.c. pump gaskit packingvehicle model - tata 407make by - carter/ ucal, a.c. pump gaskit packingvehicle model - tata 709/mini busmake by - carter/ ucal, a.c. pump gaskit packingvehicle model - tata 712 mini busmake by - carter/ ucal, a.c. pump gaskit packingvehicle model - big bus/tata 1210make by - carter/ ucal, a.c. pump gaskit packingvehicle model - big bus/tata 1510make by - carter/ ucal, a.c.pump assy electronicvehicle model - enfield bullet 350 ccmake by - carter/ucal, a.c.pump assy electronicvehicle model - hero hondamake by - carter/ucal, a.c.pump assy electronicvehicle model - boleromake by - carter/ucal, a.c.pump assy electronicvehicle model - mm max make by - carter/ucal, a.c.pump assy electronicvehicle model - tata sumo goldmake by - carter/ucal, a.c.pump assy electronicvehicle model - tata sumo spacio/grand /victa ma

CTN :45527844

22 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of 1.5 ton ac , 2.0 ton ac , supply and fixing of ms stand , supply and laying of cable , supply and installation of electric water cooler , supply and installation of deep freezer , supply and installation of refrigerator , supply and installation of desert cooler , supply and fixed mcb 20 amp , supply and fixed sub main wiring , supply and fixed copper wire , supply and fixed pvc drain pipe

Corporations And Associations And Others

CTN :45523190

19 Jun, 2026 4.76 Lacs

Delhi - Delhi

Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

Central Government/Public Sector

CTN :45530225

04 Jul, 2026 NA

Delhi - Delhi

Tender For supply of 4 ton inverter cassette ac , 3 ton inverter cassette ac , one and half ton split ac , installation of one and half ton split ac , installation of 4 ton cassette ac , installation of 3 ton cassette ac , copper refrigerant piping , insulated copper refrigerant piping , providing and laying of cable , drain pipe installation , outdoor unit stand for cassette ac , outdoor unit stand for hi wall split ac , transportation and shifting of ac units , ac installation civil works , false ceiling modification work

State Government

CTN :45539294

19 Jun, 2026 11.24 Lacs

Delhi - Delhi

Tender For repair maintenance of outfall of b-block shastri nagar by providing laying ms pipe 450mm dia. at outfall near 56 biga park near najafgarh drain in sadar bazar constituency ac-19 under ee(c)-13 (re-invite).

Gas Management System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors