Latest gas mixing unit Tenders | Government gas mixing unit Tenders

Central Government/Public Sector

CTN :44525638

16 Apr, 2026 NA

Wanakbori - Gujarat

Tender For corrigendum : rn m of boiler unit 2 gsecl wanakbori tps - modification of steam generator (boiler) of 210 mw for comprehensive work of availability and efficiency improvement through modification/overhauling of boiler back pass/ boiler pressure parts, fuel firing system, ducts, milling system & aph and flexible operation at 40% tmcr load without oil support at 210 mw , u#2, gsecl wanakbori tps, dist – kheda, (gj)

Central Government/Public Sector

CTN :44801995

20 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of online insulating oil drying system (cartridge type) as per annexure enclosed. , fo cable (with gi conduit) / armored fo cable of 50 mtrs as per annexure enclosed.

Central Government And Public Sector

CTN :44803057

29 Apr, 2026 NA

Surat - Gujarat

Tender For supply of turbine governing system d d - hp so unit complete assembly as per bhel drawing no. g2613888_item 1 to 58 , lp so unit complete assembly as per bhel drawing no. g2613898_item 1 to 58 , acceleration governor assembly as per bhel drawing no. g2613911 item no. 1 to 3, 5 to 7, 9 to 13 and 15 to 31_without gear , assembly of hpsop relief valves as per bhel g261389 _item 1 to 10 , assembly of lpsop relief valves as per bhel drawing no. g2613892_item 1 to 10 , 7 inch vertical governor assembly as per drawing no. g2613904_calibrated and tested , hp governor valve relay gear power cylinder assembly as per bhel drawing no. g2613887 consisting of item 1 to 11 and 13 to 72 , safety governor stub shaft as per bhel drawing no. g2613909 assembled with oil tripped safety governor as per bhel drawing no. g2613908 , valve spindle and rivet assembly for hp governor as per bhel drawing no. g2613886 item 9, 13 and 14_sub assembly supply , hp governor valve relay gear cam as per bhel drawing no. g2613887_item 9. , hp governor valve relay gear cam roller as per bhel drawing no. g2613888_item 27 , dump valve of lp governor valve sleeve, valve, valve seat, spring and orifice as per bhel drawing no. f2701489 item no. 3, 4, 5, 6 and 16_loose supply , dump valve of lpev sleeve, valve, valve seat, spring and orifice as per bhel drawing no. f2701488 item no. 3, 4, 5 and 6_loose supply , turbine governing system worm wheel_item no. 2_as per bhel drawing no. g2612888_loose supply , hp pilot valve body as per bhel drawing no. g2613906_item 01 , lp pilot valve body as per bhel drawing no. g2613906_item 02 , impulse unit isolating valve as per bhel drawing no. f2702004_item 1 to 6. ) /bid number : gem/2026/b/7379492 * /dated: 08-04-2026 & & / bid document 1 / 26

Central Government And Public Sector

CTN :44803093

29 Apr, 2026 NA

Surat - Gujarat

Tender For supply of online gas chromatograph system of cic make d d - thermal conductivity detector _tcd_ for olgc system, tcd detector with tc-k sensor part code_ic-dhruva2023-cs-015a , 10 ports gas sampling valve manual for olgc, vici, 1 by 16 inch with fittings part code_cic-dhruva2023-cs-018 , porapack - q column od 1 by 8 inch length 2 meter ss304 suitable for olgc systems part code_ cic-dhruva2023-c- 033a , analytical column_3 meters x 1 by 8 inch od, molecular sieve 5a, suitable olgc systems part code_ cic- dhruva2023-c-031 , pr502 temperature controller with rs485 for olgc product code_ cic-dhruva2023-rs-0033 , mass flow controller with inbuilt sensor electronic, 0.25 percent accuracy for olgc part code_ cic-dhruva2023-rs - 0011 , plc plus rs485 module for olgc product code_cic- dhruva2023-cs- 030 , digital to analog module for olgc product code_ cic-dhruva2023-cs- 031 , column oven assembly _porapack and molecular seive_ with heater sensor for olgc product code_cic-dhruva2023-c-021a , tcd euro pcb assembly along with mv and ma dpm for olgc product code_ cic-dhruva2023-c-ex1 , digital indicating alarm meter for olgc product code_ cic-dhruva2023-c-ex2 , compression fittings for olgc product code_ cic- dhruva2023-c-ex3 , 2-way solenoid valves for olgc product code_ cic-dhruva2023-c-ex4 , 3 way solenoid valves for olgc product code_ cic-dhruva2023-c-ex4 , peltier cooler for olgc product code_ cic-dhruva2023-c-ex5 , calibration standard gas mixture _47 liter water capacity cs cylinder with brass valve, pressure_ 100 kg. product code_cic_dhruva2023_c_cyl1 , calibration standard gas mixture _47 liter water capacity cs cylinder with brass valve, pressure_ 70 kg. product code_ cic_dhruva2023_c_cyl 2 , calibration standard gas mixture _47 liter water capacity cs cylinder with brass valve, pressure_ 130 kg. product code_cic_dhruva2023_c_cyl 3 , pump, oil free, vacuum pump for olgc product code_cic-dhruva2023-c-ex8 , filtration housing for vacuum pump used in olgc product code_cic-dhruva2023-c-ex9 , thermo-electric module for olgc product code_cic-dhruva2023-c-ex6 , conditioning module for olgc product code_cic-dhruva2023-c-ex7 , mounting accessories for olgc product code_cic- dhruva2023- cs-018a , rs232 to ma convertor module for olgc product code_cic-dhruva2023-cs-031a

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

CTN :44817042

06 May, 2026 NA

Kalagarh - Uttarakhand

Tender For annual maintenance contract for repairing of ventilation system (inlet fans, outlet fans, gt oil cooling pump motors, transformer cooling fans and exhaust fans) at rps, kalagarh

CTN :44807396

13 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of lub oil r/brand, packed in 210 ltrs. non-returnable new steel drum. iocs=servo system-32 bpcs=bharat hydro.-32 hpcs=enklo-32, gulf oils-harmony-32 as per drg.no. nil alt nil [ warranty period: 30 months after the date of delivery ]

CTN :44807397

13 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of machinery oil r/brand, packed in 210 ltrnon-returnable new steel drum. iocs= servo system hlp-32 bpcs= hydrol hlp-32 hpcs= enklo hlp-32 as per drg.no. nil alt nil [ warranty period: 30 months after the date of delivery ]

CTN :44807398

13 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of machinery oil r/brand, packed in 210 ltrnon-returnable new steel drum iocs= servo system-100 or equivalent brand of m/s.hpcl & bpcl. specn: ioc servo system 100 or equivalent bp/hp brand make. [ warranty period: 30 months after the date of delivery ]

CTN :44807399

13 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of machinery oil r/brand, packed in 210 ltrnon-returnable new steel drum. iocs= servo system hlp-46 hpcs= enklo hlp-46 bpcs= hydrol hlp-46 as per drg.no. nil alt nil [ warranty period: 30 months after the date of delivery ]

Gas Mixing Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government