Get complete information related to latest Gas Connector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Gas Connector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Gas Connector Tenders.
Tender For repair and rectification of w/s leakages found in ac pipe c-15 including excavation, bailing out of water providing and fixing of ci detachable joints c-15 suitable for ac pressure pipe marked with is: 8794 for use with ac pipes complete with 2 no. rubber ring marked with is:5382 & is:10292 and appropriate no. of nuts and bolts marked with is 1363 including carriage in all respect and including cost of ac pressure pipe c-15 as per is: 1592 & 2003 complete in all respect to the satisfaction of the engineer-in-charge/ac 100 mm pipe class-15/ at bawwa ,repair and rectification of wis pipeline leakages found in pvc pipe including excavation, bailing out detachable joint suitable for 6kg cm2 pressure pipe marked of nuts and bolts marked with is 1363 the satisfaction of water providing and fixing of pvc with is: 8794 for use with pvc pipe complete with 2 no. rubber ring marked with is and appropriate no. including carriage in all respect and including of pvc pipe isi marked complete in all respect to of the engineer-in-charge/ac 200 mm i/d class-25/at bawwa ,repair of 150mm sluice valve including making m.s spendle, g.m. chuck nut, new chimta, nut bolt, rubber jain, glain dori, grease sluice valve opening and fitting at site, carriage charges from site to work shop and work shop to site including labour charge complete as per specification of engineer-in-charge complete in all respect, /150 mm sluice valves repair / at bawwa
Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm
Tender For 1. purchase of necessary goods for the sanitary department of municipality; 2. purchase and repair of necessary goods for the streetlight department of municipality; 3. repair of motor, rewinding, and starter for the water/meter motor in the water/meter department of municipality; 4. purchase of necessary goods for the stationery department of municipality; 5. printing work for the stationery department of municipality; 6. annual rate for the work of cleaning gutters by skilled laborers/contractors in the gutter department of municipality. note: for details of items 1 to 5, the last date for submitting tenders is 05/09/2023, and the last date 7. supply of necessary galvanized/non-galvanized, h.d.p.v.c.v.c.c. pipes and fitting materials for the water supply department of municipality; 8. annual rate for supplying submersible motor, panel, cable, valve and related accessories for the existing pumping station in sojitra municipality; 9. annual rate for painting the existing water tanks in various areas of sojitra municipality; 10. annual rate for supplying and repairing valves (53mm to 200mm dia) of hdp/pvc/di/ci/cc pipes for the water works pipeline and annual rate for supplying pipes of all types and similar materials; 11. annual rate for computer service maintenance and printer refilling/service for office use in sojitra municipality (hp 1007, hp 1020 (no.-5), samsung-1610, canon mf4320, mfc-j430w color printer); 12. annual rate for supplying and fitting cement concrete blocks and paver blocks for gutters in the gutter department of sojitra municipality; 13. annual rate for labor and material for laying new lines for rainwater drainage in various areas of sojitra municipality; 14. annual rate for supplying necessary materials like cement, sand, gravel, bricks, soil, etc., for the construction of new gutters in various areas of sojitra municipality; 15. annual rate for supplying various items like k.j.b.c., small tractor, trolley, engine oil, hydraulic oil and all other spare parts; 16. annual rate for repairing various items like power pack, 30 h.p.t.a.m.t.d. tractor, water bowser, weighing machine, street light, water pump, water tank, and trolley with k.j.b.c. and s.m.t.d. in various areas of sojitra municipality; 17. annual rate for repairing punctures of k.j.b.c. tractor and trolley tires in the sanitary department of sojitra municipality; 18. annual rate for supplying new tires for k.j.b.c. tractor and trolley in the sanitary department of sojitra municipality; 19. annual rate for repairing super suction machines for cleaning new and old gutters and manholes in sojitra municipality; 20. annual rate for supplying a4 size paper for daily office work in sojitra municipality (approx. 1000 reams); 21. annual rate for supplying new motor pump, cable, panel, starter and other materials up to 10 hp for the existing pumping station in the water works department and fitting work; 22. government work, vehicle rental; 23. supply of drinking water in municipality. 24. annual rate for supplying various items like stage, speaker, mic, chairs, tables, etc., for various programs held in the municipality; 25. annual rate for providing tea and snacks for officers, visitors, survey teams, and other municipal officials visiting the municipality for higher education; 26. annual rate for various schemes for government/public welfare work to be done throughout the year; 27. annual rate for digging new gutters in the municipality area.
Tender For auction sale of depot ferrous scrap - lot of scrap consisting of ferrous junck & corroded material buried in soil, tree, trapped under earth, within bushes, grass, shrubs. lot consisting of mf10 type materials rusted and corroded condition of different type materials liker verious size,, nuts, bolt, rivets,chains, coil spring,air spring assmbly,& suspension with or without rubber attachment, spray tin bottles,small drum capacity 4 ltrs damage condition, electrical boxes,signal boxes,and other boxes, locking plates, cut piece of iron wire, ms iron strip, sheets & cut pieces iron plate, cycles, signal rod, coupler rods,air fillter, hand brake wheel , sackle pin etc,cut pieces of pipes with or without ci. attachments, filters, junk cylinders, junk doors, junk cut pieces of angles ,channels and bars, small parts of c&w and electric loco items junk kuchra, tube light fitting, electric fitting with or without non - ferros attachment etc. different type iron bed,chairs with or without cushan, almirah, table,cooler duct, pipe, rod, bunch of wires, with or without slightly non- ferros & ss attachment etc. fully formed or broken condition as available as in the lot. excluding rail wheels, rails, axle, trolly and cs/1,mt/1 materials. nb:- manual digging and collecting by purchaser on his own arrangement from soil.
Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin
Tender For supply of various items required for implementation of mgnregs & vb-g ram g - 1st class picked jhama bricks(traditional) , stone boulder 225 mm above) , stone boulder (225mm-150mm) , laterite boulder , fine sand , medium sand , coarse sand , bamboo (8cm-10cm diaj including fixing , eucalyptus bullah (7.5cm-10cm dia) , eucalyptus bullah (12.5cm-15cm dia) , eucalyptus bullah (17.5cm-20cm dia) , sal bullah (7.5cm-10cm dia) , sal bullah (12.5cm-15cm dia) , sal bullah (17.5cm-20cm dia) , nail , hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings , hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings , hire charges of 5 kva generator , hire charges of 3 kva generator , hire charges of monkey set , loading unloading & stacking sand/stone aggregate (less than 40mm nominal size) , loading unloading & stacking stone aggregate (above 40mm nominal size) , loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material , stone screening type a (13.2 mm) , stone screening type b (11.2mm) , 1st class traditional bricks (kiln burnt) , loading, unloading & stacking by manual means (r.c.c. pipes, c.1. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia , loading, unloading & stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced cement pipes) 900 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia , sausage wire net , wood dust , tor steel rods/hysd bars/tmt bars , (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysd bars/tmt , bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ss l)(fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysd bars/tmt bars (other than sail/tata/rini/jsw/jspl/shyam/srmb/bmasl/elec rosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786) , loading, unloading and stacking by manual means of , steel , neem wood , other local wood , sisu/gamar wood , local sal wood , bright finished or black enamelled mild steel screws , 40 mm , bright finished or black enamelled mild steel screws , 20 mm , bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm. , bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm. , bright finished or black enameled mild steel butt , hinges 100x58x 1.90 mm , coal tarring , fan hook , r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area , udaypur marble slab (for floor, lobby etc) 18 mm. thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m , udaypur marble slab (for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for wall/dado) 18 mm. thick of size 0.3 sq m to 0.6 sq m , frp composite door frame 66mm x 70mm. , frp composite door frame 66mm x 90mm , coloured pedestal type w.c. pan 580x440 mm , 32 mm dia polythene flush pipe , 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble) , gl pipe 32 mm dia medium quality for underground works , gl pipe 40 mm dia medium quality for underground works , cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia) (for concealed work) , thermocol 12.5 mm thick. , chromium plated stop cock (equivalent to code no. 513(a) & 513(8) & model - tropical/sumthing special of essco or similar brand). , chromium plated angular stop cock with wall flange (equivalent to code no. 5053 & model - flore
Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite
Tender For certain repairs to water supply distribution lines and other connected items at zone c at mil stn bhuj and gandhidham under ge(a) bhuj - taking up u/s ac/gi/di/upvc water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 200 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and directed., all as per item 1 above but 150 mm dia bore complete all as specified and directed., all as per item 1 above but 100 mm dia bore complete all as specified and directed., all as per item 1 above but 80 mm dia bore complete all as specified and directed., all as per item 1 above but 50 mm dia bore complete all as specified and directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed., material and labour di pipes of size 150 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed. note: di fitting /lead joint / tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site., all as per item 7 above but 100 mm dia bore complete all as specified and directed., supply and fixing in any length upvc pipe 150 mm dia pipe manufactured as per astm-d-1785 as per is-559, schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed., all as per item 9 above but 100 mm dia bore complete all as specified and directed., all as per item 9 above but 80 mm dia bore complete all as specified and directed., all as per item 9 above but 50 mm dia bore complete all as specified and directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of pipe size upto 200 mm dia complete all as specified and directed. ( lead /gasket for fitting shall be measured and paid separately), s & f in repair upvc ball valves with operating handle (stop valve) of size 50 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., s & f in repair upvc ball valves with operating handle (stop valve) of size 80 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed., rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed., removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed., hard standing cutting/road cutting for laying of pipe and making surface good with pcc 1:3:6 complete all as specified and directed., taking down carefully cast iron sluice valve of size 80 mm to 200 mm bore from ci water mains, complete with all acessories complete all as specified and directed., s&f in repair sluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindle with nut, long body, class p n 1.6, conforing to is 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water
Tender For auction sale of depot ferrous scrap - scrap ms junk ferrous released from lcw and others consisting of corroded material, girder plate,door,tie bar cast iron signaling material, location box full and half,padastal for gate(signaling) ms cutting ,hand lorrey,st sleeper, wagon plate, fire bucket, fire extinguisher, parts of blower, guard sheet, driver sheet, all type of brake cylinder, gi doors, angle & sheet,all type of beds of pipe & angle, corroded ms rings, released nut bolt rivets , shackle pin, jali, fan jali, em & rubber pads, all types of headlights, doors corroded plates, sheet, drums, pipes , corroded angle , channel, tank, ms fitting, panel board, panel box, wire, rod, saria, signaling ms/gi items,panel, small pieces of ms/ci, iron rod,ele. loco parts, side body and other wagon parts corroded misc.items of all type of ms/ci scrap of sorts and sizes and old used unserviceable., (except wta items, spring, rail). fdp 40 days. material should be loaded with one end from lot as per description. cutting will be allowed for easy loading. mode of delivery by actual weight.