Latest gas kit Tenders | Government gas kit Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

corporations/Associations/Others

CTN :45740125

21 Jul, 2026 NA

Cuddalore - Tamil Nadu

Tender For servicing of gas kits in community halls (block-08, block-10, block-16, block-24, block-27 and block-29) in neyveli township

CTN :45197599

14 Jul, 2026 3.46 Crore

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of hexagon screw , v ring 70.0mm , snap ring , ring sealing , o ring , gasket kit , ring clamping , spring plate , sealing cylinder , stuffing box packing , grooved ring , ventillation rosette , cable (water tight-7001000050) , o ring , o ring , cable (mgsgo 1 x 95) , cable rg59b/u , valve pressure regulating , distance ring , remote small terminal rst 16cx012 , diaphragm , controller working pressure , cap serew , ring grooved automatic (1542-007-761) , lock plate km 108 for 1(a) , plug outboard , locking ledge , seat , sleeve nut , expansion valve , rc angle valve automatic , valve automatic oc-staight-way , 4/2-way valve (v-20 , 21 , 22 , 23 , 24 , 61 , 60 , 62) , portable pas control station

CTN :45720895

01 Jul, 2026 25.00 Lacs

Pali - Rajasthan

Tender For annual rate contract for annual maintenance and spare parts supply work of jcb machines. - cylinder liner, over haul gas kit, valve inlet exhaust, crank shaft, main bearing set, trust washer, piston, piston ring set, diesel main pipe, diesel filter pipe, thermo state elbow, air cleaner hose, diesel pump repair with parts, thermo state valve, connecting rod, con. rod bearing set, cam shaft bush, rocker arm, rocer arm shaft, gear cam shaft, water pump assy., oil pump assy., oil filter, belt, engine mount pad, exhaust elbow, engine throttle cable, engine stop cable, turbo charger assy., silencer exhaust abi, flang exhaust, element main, element secondary, auto tensioner, idler gear, engine fan, fuel filter assy., filter kit, engine connecting rod, fan drive puley, hyd. strainer, suction strainer, fuel injection pump, injector pipe, rubber hose, fuel filter assy., nozzle, return line, fuel module with sensor, fuel tank cap, fip repair with parts, radiator, radiator assy., coolent, hose top, hose cac (cold side), hose cac (hot side), radiator solding, front grill, front grill lock, front wheel and axle, axle service, center pin, axle stub, hub, hub stud, hub seal, seal cone, bearing inner, bearing outer, axle carrior l/h, axle carrior r/h, track rod, brake fri. plate, brake cou. plate, brake seal, brake oil 500ml, differential, differential gear planet, gear planet, bearing roller double, seal cassetle, bearing teper, tripling seal, stud wheel, carrior innulus, gear innulus ring, hub palentry, drive shaft, bearing roller, bearing teper roller, yoke, cross patti & bolt, cross holder, uj cross, bearing, brake, master brake cylinder, pipe brake l/h, pipe brake r/h, brake reserver, steering, coupling, bearing, rim steering wheel, self starter, self starter, solenoid, switch altinator, altinator puley, wheel belt 1232, rocker plate, field set, armature bush set, bearing assy., carbon set, bendex, armature, armature bush set, altenator, starter, cut out, rectifier plate, bearing, bearing plate, rotor, terminal, wiring and electrical, wiring harness complete, bettery cable, hour meter, head light bulb, tail light bulb, fuse and reley 15 amp, tail lamp, head light assy., ignition switch, wiper blade assy., harness roof, combination switch, fog lamp, body, side mirror, seat, wiper motor assy., wiper blade, catch window, latch l/h, wind screen front, glass outer l/h, glass outer r/h, rear window glass, door soccker, door hinge, lock set inner, lock set outer, door got set, door belt, transmission, transmission over, charging pump assy., counter plate, firction plate, transmission filter, bearing, bearing, torque converter, bearing, converter, drive plate kit, mounting, yoke coupling, lever assy. gea turret, selonoid valve assy., strainer, transmission filter, stabliser, steblizer piston, steblizer rod, inner leg steblizer, steblizer foot, pin pivot, adjuster, atb rear pad kit lower, atb rear pad kit upper, hydraulic, ind. steering suct, selonoid coil, hyd. filter assy., hyd. filter element, mrv, hyd. pump, repair kit, priority valve, ram seal, pump seal kit, pump steering, ramp bucket, ramp bucket, ramp bucket, ram, bucket lift cylinder ram, bucket tilt cylinder ram, boom ram, loader ram, loader jaw ram, dipper ram, slew cylinder ram, stablizer ram, steering cylinder ram, 6 in 1 ram, hose, hose-10-bsp 560mm, hose-08-bsp 1860mm, hose-10-bsp 2750mm, hose-04-10bsp 1825mm, hose-08-bsp 2620mm, hose-10-bsp 2520mm, hose-08-bsp 2860mm, hose-08-bsp 2650mm, hose-12-bsp 3900mm, pin and bush, bucket pin, pin, pin, tipping lever, pin dipper, bush, bush, pin, boom main pin, pin, pin top, pin pivot, pin pivot, pin boom ram, pin pivot, pin pivot, pin pivot, kpc kit and bush, bucket kit, seal kit, bucket seal kit, dipper seal kit, boom seal kit, seal slew kit, s t b, steering seal kit, loader seal kit, lift seal kit, bucket seal kit, rubber seal kit, boom seal kit, s t b kit, slew seal kit, loader seal kit, steering seal kit, loader and bucket welding, l

CTN :45732486

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of air compressor spares, dryer and overhauling oil seal pump shaft , oil filter , air filter complete , piston ring , valve discharge complete , channel & spring set , oil seal -c-shaft , oil pump assmbely , connecting rod and cap assembly , gasket set complete , valve inlet complete , ring piston , o-ring , plunger unloader complete , aux valve (range 60x125) , head frame complete , piston complete , oil pressure gauge , spares for air compressor , make:- ingersoll rand , model : 2540 , crankpin bushing , connecting rod , ball bearing , ball bearing w/snap ring , inner bearing spacer , ring/gasket kit , gasket set , ring lock , pin piston , pin piston , element filter-10 micron , assembly ,spacer /valve low pressure , assembly ,spacer /valve high pressure , valve finger , filter- inlet complete , element filter-10 micron , ring set complete 7100 , valve set complete 7100 , gas kit set complete 7100 , air filter ir , csc unloader-7100 , pilot valve - lp , auxilary valve-lp , discharge tube -97045405 , size: 182mm x 512mm , oil t-30 , hp head cylinder with piston & accessories for air compressor make : ir model ir 7100 , lp head cylinder with piston & accessories for air compressor make : ir model ir 7100 , air dryer , make-ir, model-d144 in-a , sr.no. nar10084230 , air flow : 2400 i/min , electric power :74kw max , pressure : 14 bar , ambient temperature : 50 deg c , max. inlet temp : 60 deg c , cooling fluid: r134a-0.3kg , power supply : 230v/1/50 , overhauling of air compressors with necessary spares replacement

CTN :45709143

24 Jul, 2026 NA

Midnapore - West Bengal

Tender For procurement of cylinder head assy ,liner and cylinder liner gasket kit for wds 6r locomotive engine for chp,ktps

CTN :45596854

30 Jun, 2026 NA

Murshidabad - West Bengal

Tender For corrigendum : supply of amp meter , rectifier matalic , resistor variable , volt meter , bearing main , brake hose pipe , tapet cover gas kit , complete set gas kit

CTN :45717277

09 Jul, 2026 NA

Delhi - Delhi

Tender For tender for supply of lv7/tmb 2574-1511-0112 fixing bracket assy , lv7/tmb 2786-1460-5802 hose hump , lv7/tmb 2691-2620-0189 assy helical gear (5th speed) , lv7/tmb 2525-2010-0119 water pump kit (major) , lv7/tmb 2573-2310-0102 repair kit for valve pump , lv7/tmb 2505-2600-0102 set of gasket kit , lv7/tmb 2786-1499-9923 hose flexible , lv7/tmb 2574-3305-6001 assy tie rod , lv7/tmb 2576-5440-0106 blinker rh , lv7/tmb 2786-0399-9980 set & connecting rod bearing std , lv7/tmb 321-262-0723 sliding sleeve

CTN :45602535

30 Jun, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of self starter assy , silencer elbow , engine oil filter , diesel filter , gasket kit complete , lifting repair kit , air cleaner mirror , fan belt , straight hose , seal carrier lt , lifting pump assy , wheel bearing rear

Central Government/Public Sector

CTN :45703049

03 Jul, 2026 4.15 Lacs

Kollam - Kerala

Tender For procurement of spares for bag stitching machines - pressure foot guide am (18341/28), throat plate screw (23473/28), thread tension screw (7023/f), thread tension nut (85), tension disc (54), tension spring (95), feed dog arm pin (7020/e), feed dog arm pin nut (2710/as), drive pin (2710/c), needle bell crank taper pin screw (2701/m), needle drive arm bearing cap (2714/r), needle drive arm end screw (2714/q), sewing head fixing nut (5254/18), looper screw (6789/18), looper nut (6790/18), grub screw eccentric (2700/b), grub screw special (2700/ba), pressure foot roll screw (18339/18), needle tension spring (2710/b), screw special (16791/18), needle drive sleeve (2714/e), 1/4 dia brt ms washer, 5/16 dia plain washer, screw special (76), oscillator bar (7340/b), looper oscillating block screw (3010/e), looper clamp assly (20792/38), looper drive link (3010/0), looper drive link taper pin (3010/ca), nibbler knife (11025/38), needle bar thread eyelet (2714/d), needle clamp nut (2714/cj), feed dog am bell crank (7020/s), feed dog arm pin sleeve (7020/f), feed dog am pin spring (3014/c), oscillator pin (2701/s/hs), feed dog strut (2702/j), feed dog strut retainer (2703/x), assly oscillating block complete (16502/38), looper (3010/j), needle (30), needle drive link (2703/aa), needle drive link taper pin (2703/ab), grub screw standard (2710/fa), screw special (3010/db), nut special (2710/pp), nut special (3010/ab), needle bar bush (2714/b), pressure foot hinge pivot screw (2703/ja), screw special (2437/18), fibre disc retaining screw (2714/j), thread eyelet (196), feed dog arm shaft nut (2710/an)

Gas Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector