Latest gas meter scrap Tenders | Government gas meter scrap Tenders

Central Government/Public Sector

CTN :45329483

24 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government/Public Sector

CTN :45579040

15 Jul, 2026 NA

Duliajan - Assam

Tender For tender for supply of rotary evaporator , digital conductivity meter , digital ph meter , mud retort kit , mud retort kit , pressurised mud balance , temperature calibration bath

CTN :45592966

27 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of monkey plier large taparia , monkey plier small taparia , adjustable spanner large stanley , adjustable spanner small stanley , hammer large stanley , hammer small stanley , stanley socket set big , torque wrench 250 nm taparia , torque wrench 500 nm taparia , stanley t socket t spanner set 6 mm to 15 mm , feeler gauge stanley , star torque socket set stanley or taparia , clamp meter fluke ac or dc 1000 amp , temperature gauge with meter sigma digital , reflector jacket , greese gun 10 kg , hand greese gun , fuel rotary repair kit , heavy vehicle wheel nut removing machine , big funnel , dip stick 210 litre , creeper b vehicle , spanner ring 6 by 7 to 30 by 32 stanley or taparia , spanner open 6 by 7 to 30 by 32 stanley or taparia , oil filter spanner eero strap , cordless impact wrench bosch or electric screw driver * /bid number : gem/2026/b/7677159 + /dated: 17-06-2026 ' ' / bid document 1 / 20

CTN :45593148

27 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of testing of earth pit , testing of relay , thermography of equipment , preparation of earth pit layout , testing of insulation mat , load testing of battery bank , transformer oil testing , testing of transformer tan delta , testing of transformer partial discharge , routine testing of transformer , servicing and testing of vcb , wti winding temperature indicator calibration , oti oil temperature indicator calibration , buchholz relay testing , testing of third harmonic la , testing of vcb bottle , vlf testing of cable 100 percent , polarization index testing motor , insulation resistance testing , electrical safety audit , calibration of voltmeter , calibration of ammeter , cablibration of energy meter , cablibration of power factor meter , acb servicing and testing , pair of ht electrical gloves, 25 kv, is 13774 2021 , pair of lt electrical gloves, 1.1 kv, is 4770 1991 , insulation mat 2.5 mm, lt, is 15652 , insulation mat 3 mm, ht, is 15652 , oltc oil testing as per is 1866 , dga of transformer oil , transformer oil filtration , thermal omicron b2hv relay test , testing of mccb , testing of rccb , pi of power cables , current transformer testing , digital megger meter , led 300 watts for high mast tower , digital ampere meter , communication cable tester , digital clamp meter * /bid number : gem/2026/b/7664367 + /dated: 17-06-2026 ' ' / bid document 1 / 51

CTN :45543826

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of digital distometer make skadioo or bosch , speedo or odo meter for measuring of road distance , road depth gauge 6 inch 150mm dia , long probe heavy multipurpose temperature thermometer for road work make labart , electric bench griding wheel green silicon 150mm 80 grit , mortise chisel half inch make anant , smooth plane 04 inch make anant , smooth plane 10 inch make anant , cross pein hammer 300gm make taparia , firmer chisel 25mm make anant , chisel for carpenter 25mm make anant , glass cutter , screw driver both side make taparia , wiremesh cutter make taparia , center wall punch make taparia , mini hack saw frame with blade , cross pein hammer 100gm , carborunum stone 8 inch make universal , measuring tape 3mtr make hi speed , pincer 8 inch , hammer 300gm , hammer 400gm , box wrench heavy duty 14 inch make taparia , teflon tape , screw driver 12 inch plus make taparia , screw driver 12 inch minus make taparia , monkey wrench make taparia , adjustable wrench make taparia , nose plier make stanley or taparia , plier make stanley , pipe extractor , pipe wrench 10 inch make taparia , aluminium drill bit set 4mm to 10mm , hammer drill bit set 4mm to 5mm , spanner set 4mm to 20mm make taparia , nail punch make bosch * /bid number : gem/2026/b/7661755 + /dated: 13-06-2026 ' ' / bid document 1 / 30

CTN :45559777

29 Jun, 2026 NA

Ahmednagar - Maharashtra

Tender For supply of digital multi meter , digital barometer , clamp meter , electronics screw driver set , electric blower , temperature and humidity meter , dc regulated power supply , digital oscilloscope

CTN :45532323

22 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For procurement of chemistry lab equipments - procurement of chemistry lab equipments, digital balance weight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meter range 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., digital ph meter ph range o to 14, resolution 0.01 ph, digital display, heating mantle capacity: 500ml rating 200w with energy regulator, electric bunsen burner maximum temperature up to 800 degree c, power supply 220 to 240 v, power 350 w

State Government

CTN :45542414

06 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For rate contract of supplement medicine and diagnostic - description of supplement medicine & diagnostics, albendazole tablet 400 mg, calcium tablet (500 mg elemental + vit d3 250 iu), ifa red: prophylactic (preventative) dose: typically one tablet daily (containing 60-100 mg elemental iron and 400-500 g folic acid), usually starting after the first 12 weeks of pregnancy and continuing for a minimum of 180 days.therapeutic dose: if you are diagnosed with anemia, your doctor may increase the dosage to two tablets daily.postpartum: it is often recommended to continue taking these supplements for at least three months after childbirth., digital hemoglobinometer: measurement range: typically 0 - 25.6 g/dl (or 0 - 256 g/l).methodology: reflectance photometry or absorbance spectrophotometry.sample type: capillary, venous, or arterial whole blood.sample volume: very small, usually between 8 l and 15 l.time to results: under 15 - 60 seconds.memory capacity: stores 500 to 1,000 test results with date, time, and patient id.power: rechargeable battery or aa batteries., digital hemoglobinometer strips: sample type: fresh capillary whole blood (finger prick) or venous whole blood.blood volume: 10 l to 30 l (approximately one drop).measuring range: usually 3.0 to 25.6 g/dl.result time: between 15 to 60 seconds, depending on the testing mechanism.operating temperature: stable between 2 c to 40 c.shelf life: typically 18 to 24 months from the date of manufacture when stored properly. digital hemoglobinometer will be free as per company policy., glucometer: measurement range: typically 10 mg/dl to 600 mg/dl (or 0.6 mmol/l to 33.3 mmol/l). results falling above or below this range are generally flagged as "high" or "low".testing method: usually employs electrochemical biosensors (like glucose oxidase or glucose dehydrogenase) to generate a detectable electrical current from the blood sample.accuracy standards: devices generally conform to en iso 15197:2015 performance criteria, which require 95% of results to fall within 15 mg/dl of lab values at concentrations 100 mg/dl, and within 15% at concentrations 100 mg/dl.hematocrit range: most meters accommodate blood hematocrit levels between 10% and 65%.power source: usually powered by 1 to 2 standard coin-cell batteries (e.g., cr2032).physical specs: lightweight and compact, typically weighing between 40g and 75g., glucometer strips: blood sample volume\(0.3\text{ \mu l}\) to \(1.0\text{ \mu l}\) (capillary blood)measurement time5 secondsmeasurement range10 mg/dl to 600 mg/dl (varies slightly by meter)enzyme technologyglucose oxidase (god) or glucose dehydrogenase (gdh)shelf life12 to 24 months (usually 3 to 6 months after opening)operating conditions4 c to 30 c (storage), 10-90% relative humidity. glucometer will be free as per company policy., ors: recommended by the world health organization (who) and unicef- sodium chloride (nacl): 2.6 gglucose (anhydrous): 13.5 gpotassium chloride (kcl): 1.5 gtrisodium citrate dihydrate: 2.9 gtotal weight: 20.5 g

CTN :45533210

23 Jun, 2026 NA

Rohtak - Haryana

Tender For instrument spares for refinery - 3 way manifold, pressure-0 to 120 kg/cm2, with all mounting studs and accessories., air filter regulator, pressure 7 kg/cm2 make- precision, analog input card 8 channel for siemens make dcs part no. 331-1kf01-0ab0 make- siemens, analog ouput card 8 channel for siemens make dcs part no. 332-5hf00-0ab0 make- siemens, bagging machine controller for automatic bagging machine, make power build, model no c750 make- mettler toledo, chute lever sensor high temp. make- yu technologies pvt. ltd,, differential pressure switch, range 0.2 to 6 bar, differential - .25 to 1.2bar, sensing element- copper alloy, elec. ranting- ac-1 : 10 a, 230v ac, make- wika, digital input card 32 channel for dcs part no. 321-1bl00-0aa0 make- siemens, digital output card 32 channel for dcs part no. 322.1bl00-0aa0 make- siemens, discharge valve for pan discharge, input/output connection , double siphon pressure 120 kg/cm2, input/output connection : : threaded, flow meter totalizer, model no. 1008s, input-4 to 20 ma make massibus, flow meter for imbibitions water flow, range -100 tph, line size 4 make- krhne marshall, chute level indicator cum controller, no of sensor 6, output-4 to 20 ma, input supply-230 vol ac make- yu technologies pvt. ltd,, k type thermocouple sensor length -400mm, sensor thickness-6mm, duel output connection, input connection-1/2 npt (m) make- temson, load cell for automatic bagging machine, capacity-110 kg, positioner for control valve i/p 4-20ma, o/p- 4-20ma, make- ytc, pressure gauge range 0 to 160 kg/cm2, dial size 8 inch, input connection (bottom) npt(m) making black & white back ground make- baumer, pressure gauge- range- 0 to 20 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, with glycerin filled type make- baumer, pressure gauge- range- 0 to 4 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, make- baumer, pressure gauge- range- 0 to 25 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, with glycerin filled type make- baumer, pressure gauge- range- 0 to 10 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, make- baumer, smart type pressure transmitter , input 0 to 120 kg/cm2, input connection npt (m), hart enabled, with all mounting accessories. make- yokogawa/honeywell, pu tee, 8 mm x make- janatics, pu connector size dia, 8x make- janatics, pu connector both size flange size dia, 8x x 8x make- janatics, pu tube cap. dia 8 x , pressure-30 bar one roll-100 mtrs. make- janatics, rtd pt 100, sensor length 400mm, sensor thickness-6mm, duel output connection, input connection- npt 9m) make temson, sack grip belt for automatic bagging machine, seal kit for automatic bagging machine, model no. dnu 50, for bag clamp cylinder make- festo, seal kit for automatic bagging machine, model no. dnu 40, for course/fine cylinder make- festo, seal kit for automatic bagging machine, model no. dnu 40, for discharge cylinder make- festo, shuttle assembly for automatic bagging machine. make-festo, siemens s7 400 dcs backup batteries part no. 6es7971-0ba00 dc voltage- 3.6 vol make- siemens, single isolator input 0 to 1 amp. ac, output 4 to20 ma,(dual), input supply- 230 vol ac make- massibus, single isolator input 0 to 10 vol dc, output 4 to 20 ma,(dual), input supply- 230 vol ac make- massibus, single isolator input 4 to 20 ma, output 0 to 10 vol dc, (dual), input supply- 230 vol ac make- massibus, smps 24 vol dc source, input voltage: 110 vol dc/ 230 vol ac, output: 24 vol dc make- papper + fuchs, temperature gauge, spec- range 0 to 200 degree c, dial size 150mm, input connection: (bottonm) npt (m), making : black & white back ground, sensor thickness 6mm, capillary type, capillary length 1.5 mtr. make- baumer, temperature gauge, specification range -0 to 150 degree c, dial size: 150 mm, input conne

CTN :45540236

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of lab equipments for chemistry lab in basic engineering department - purchase, digital electronic balance /analytical balance load capacity: minimum 500 g readability: 0.01 g linearity: 0.02g display: lcd/led tare function: required top pan type power supply: 220 240 v ac, 50 hz, digital tds metermeasuring range: 0 9990 ppm resolution: 1 ppm display: lcd automatic temperature compensation (atc): required waterproof: minimum ip67 protection power source: battery operated (button cell/aaa battery), digital ph meter benchtop model ph type microprocessor/microcontroller ph range: 0 14 resolution: 0.01 ph accuracy: 0.05 ph or better combined ph electrode with temperature sensor two or three-point calibration facility temperature compensation type automatic display: lcd power supply: 220 240 v ac 50 hz warranty minimum 1 year, laboratory heating mantle (knitted glass yarn) capacity: 500ml temperature range: ambient to 350 c energy regulator/control knob: required power supply: 220-240 v ac 50 hz, electric bunsen burnerelectrically operated energy regulator/ control knob operating temperature 800 c body: stainless steel power supply source: corded electric, supplied with a heavy-duty, heat-resistant, earth-grounded, 3-pin power cord (minimum length 1.2 meters). power consumption: between 350 and 500w power supply: 220-240 v ac 50 hz, water distillation unitoutput capacity: 4 litres per hour (lph) ph value: 5.5 to 7.0 conductivity (raw water distillation):3.0 4.0 s/cm or less glassware material: borosilicate 3.3 glass (pyrex/duran equivalent) heating elements: silica- enclosed quartz heaters or chromium-plated element variants power supply: 220 240 v ac 50 hz / 60 hz, single phase automatic water level cut-off

Gas Meter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government