Latest gas seal Tenders | Government gas seal Tenders

Central Government / Public Sector

CTN :45724910

09 Jul, 2026 NA

Pune - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; rectification of the mechanical seal after supplying the faulty spare parts by oem m/s john crane sealing systems india pvt ltd, pune; service provid..

State Government

CTN :45721040

20 Jul, 2026 1.65 Crore

Mandawar - Rajasthan

Tender For - rj-19-07/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village nipaniya to kherana, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village nipaniya to kherana, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village nipaniya to kherana, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village nipaniya to kherana, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village nipaniya to kherana, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village nipaniya to kherana, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village nipaniya to kherana, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type

State Government

CTN :45721042

20 Jul, 2026 1.50 Crore

Mandawar - Rajasthan

Tender For - rj-19-08/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village dola to padiyarkhedi, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village dola to padiyarkhedi, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village dola to padiyarkhedi, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village dola to padiyarkhedi, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village dola to padiyarkhedi, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village dola to padiyarkhedi, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village dola to padiyarkhedi, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of eith

State Government

CTN :45721047

20 Jul, 2026 1.03 Crore

Mandawar - Rajasthan

Tender For - rj-19-10/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village mathaniya to ruaprel, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village mathaniya to ruaprel, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village mathaniya to ruaprel, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village mathaniya to ruaprel, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village mathaniya to ruaprel, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village mathaniya to ruaprel, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village mathaniya to ruaprel, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of eith

Central Government/Public Sector

CTN :45732153

10 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of mechanical seal with outside balanced seal type, stainless steel springs, stainless steel rotating hardware, resin bonded carbon rotating face, sintered silicon carbide stationary seat, viton secondary seal and 2000 ppm of maximum total disolved solids suitable for armstrong make vertical pump 30hp/22kw, 1500rpm of manufacture code: c-ssc-ab2. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45305483

13 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of various types of tools & tackles and miscellaneous items for day to day maintenance works for tmd-ii gtps. - fevi kwik tube 3 grams, anabond rtv silicone 666, packing : 100 gms. for gasket sealing, metal cutting wheel (for stainless steel) size 105 x 1.2 x 16 mm., grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., mini angle grinder 100 mm, rust removing spray wd-40 in aersole packing of high pressure valves ., pipe vice no.6 size 12 mm to 150 mm, bench vice apex make -150 mm (6"), bench vice apex make -200 mm (8"), gi nipple 15 mmx4 long for civil work, gi nipple 1/2" x 2" long for civil work, gi nipple 1/2" x 3" long for civil work, washing powder ( 1 kg pack ), instametal (0.5 kg/pack), grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, pipe wrench size 18" (450 mm) length, heavy duty pipe wrench size:24", heavy duty pipe wrench, length -200 mm, least max opening-33 mm, taparia product no- hpw 08, heavy duty pipe wrench, length -250 mm, least max opening-48 mm, taparia product no- hpw 10, white welding glass size 3.1/4"x4.1/4", atharmal (gremany) make dark green welding glass size:4 1/4x3 1/4 shed 11a 1 din, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., esab earthing clamp, cutogen-5 cutting blow pipe (cutting torch), esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura, cutting nozzle size 1/16", cutting nozzle size 3/64", needle file set jk make, taparia chisel 10" long, taparia flat chiesel 1046 150 mm length, hole punch set having 4 to 32 mm dia size, araldite 180 gram/tube, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 size-20mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 15kg/cm2 ,size; 25mm id.

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government/Public Sector

CTN :45233420

15 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : rate contract for spares of generator (200 mw210 mw 250 mw 500 mw bhelmake) for ntpc stations - caf gasket,0107444600000/081,bhel, earthing brush assy,11391601000-00,bhel, adhesive sicomet-50,01391201068-00/6, rubber cord,01493101006-00&5, o-ring,01493101006-00/12,bhel, plug,01360601033-00/13,bhel, profile,01350201023-00&20,bhel, rbrb gasket,01660170018c&007,thri 108/44, washer,01360601033c & 14,bhel,rtr assy, o ring,32x3mm,bhel,gen,thri 108/44, packing,viton,bhel,h2 clr,thri108/44, prof prbn 501-006,91350201000c&03,bhel, ring,01393401003c&18,bhel,thri108/44, seal elmnt,01393401003c,bhel,thri108/44, hp hose te,11391801000c,bhel,thri108/44, contact pin,01360301017-00&16,bhel, round nut,01360301017-00&21,bhel, threaded ring,01360301017-00&23,bhel, sealing cover,01360301017-00&24,bhel, washer,01360301017-00 & 22,bhel, o-ring,01360301017-00&36,bhel, o ring-tg60158,166x6,bhel,thri 108/44, o-ring,01360301017-00/37,bhel, round cord,000012550100016,lmz, o-ring,01360301017-00&38,bhel, gasket,bhel,thri108/44, silicon compound-k,01360301017-00/39, o-ring,bhel,thri108/44, hardener t37,01360301017-00/40,bhel, gasket-front,bhel,thri 108/44, gasket,bhel,thri108/44, h2 seal ring te,bhel,thri108/44, h2 seal ring ee,bhel,thri108/44, o-ring,8,bhel,thri 108/44, o ring,bhel,thri 108/44, gasket-rear,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, hardner hv998,bhel,thri108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o ring,bhel,thri 108/44, o-ring,bhel,thri108/44, folium tape,aa2561611060, te-seal strip,01391201012-00/10,bhel, micanite flex sh,bhel, oring,01350801032c,242x6,bhel,thri108/44, asbestos powder,tgemis1-var-00&83, o-ring,01360601033-00/15,bhel, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, o-ring,bhel,thri 108/44, profile,01393401003c&009,lg:2060mm,bhel, lock washer,01393401003c&006,bhel, glass tape,tgew25000012,turbo generator, gasket,91393601004c&5,bhel, lead,tgemisi-var-00&528, gasket,91393601004c&3,bhel, cross cotton tape,34,turbo generator, globe valve,11491301006-00 & 12,bhel, methyl ethyl ketone,emtmisc/var-00, solder,sn40sb, skid shoe,0136120100900002,bhel, high press hose,0139010102800011,bhel, gasket,0139120104100048,bhel,tari-108/46, gasket,0142140102000004,bhel, 108/46:rubber perbunan, brazing wire,91350701000-34,bhel, gasket seal body ee,0000537204501006, brush holder,0000512500000017, gasket,0000535100100005,bhel, strap,91350801004/37,bhel, ass mica tape,5670.269 68,bhel, sealing washer,5516.006c & 8,generator, sealing washer,5200069/40,bhel, sealing washer,000012550100069,bhel, gasket,31393501005&3,turbo generator, insulating washer,8710.138-062,bhel, insulating sleeve,6.8770.025/52, seal half ring,00005377007015, resin,tgemis 1/00 116,bhel,cy-232, aerosil powder,gr200,tgemis 1/00 86,bhel, varnish conducting,tgemis/00 56,bhel, varnish sib 642,tgemis/00 73,bhel,210mw, sealing washer,8370.070&20,thw-200-2, sealing ring,8370.071/20,turbo generator, insulating sleeve,82.8770.242&18,bhel, insulating washer,2.8710.011/10,bhel, washer,0-5372.002-00&47,turbo generator, insulating gasket,2.8766-015,generator, rubber,8503-000-6,thw-200-2, isopht.terylene tape,00005670269/00 69, sealing ring,05516.006c & 5,generator, sealing washer,1255.001c & 70,generator, sealing washer,00001255006/68, terminal bushing,00001255008/44, terminal bushing,00001255008/45, oil catcher,generator, sealing washer,0-136-03-01003 & 14, insulating bush,0-136-03-01003/17, nut,5200082/26,turbo generator, washer,0-139-34-01003 & 023, insulation washer,0-145-04-01019&26, insulation box,5200082 & 21, sealing washer,00005516006&8, washer,5200082-15

Central Government/Public Sector

CTN :45389373

06 Jul, 2026 NA

Raebareli - Uttar Pradesh

Tender For corrigendum : providing of facility management services - lumpsum based - industrial; o&m of mechanical work, supply and application of air seal in boiler pressure parts,aph and duct area of 5x210mw and 1x500mw boilers of fgutpp, unchahar; consumables to be provided by service..

Central Government/Public Sector

CTN :45557245

07 Jul, 2026 NA

Medak-T - Telangana

Tender For corrigendum : tender for supply of b7b1z30213 condensate transfer pump and spares - condtrans pump asy 5m3 per hr 6.0kg per cm2 safe , set of gaskets and o rings for ctp , set of oil seal pump housing , set of mechanical seals for ctp , set of bearing for ctp 5m3 per hr , set of shaft and impellers for ctp , set of bearing for ctp motor

Gas Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors