Latest gas spring Tenders | Government gas spring Tenders

State Government

CTN :40044754

23 Apr, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

Central Government And Public Sector

CTN :40066488

03 May, 2025 NA

Angul - Odisha

Tender For supply of coolant filter pt no 546726543,cartridge separator pt no 54749247,gas spring pt no 54749114,belt drive pt no 89265052,ultra coolant 2l pack pt no 38459582,pre-filter element pt no 22053722,valve solenoid ptno 54774302,kit mpv pt no22064695,kit thermal valve pt no 22832885

CTN :39010535

21 Apr, 2025 47.84 Lacs

Bardhaman - West Bengal

Tender For corrigendum : tender for supply of esp spares - ce sys ce hammer assembly , ce sys collecting electrode , ce sys collecting electrode hammer shaft , ee sys de hammer assembly , ee sys emitting electrode 2 point 68 m , ee sys emitting electrode hammer shaft , ce rapp mn plummer block ce rapping , ee rapp mn plummer block de rapping set , miscellaneos gd hammer assembly

CTN :39855401

26 Apr, 2025 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of esp internal spares for overhauling of unit-1 under ahp-em dept. at bktps. - bush bearing (vertical shaft bush),eerm # bhel # for esp:faa-6x45-2x108135-2additional data:bush bearing along with housing for vertical shaft bush of rapping mechanism for emitting , (bush size: id- 40.5, od- 70, l- 55 mm) )moc : bush c.i. and body made by m.s.,, bush,material:cast iron for espsize: 70 mm(od) x 41mm(id) x 55 mm(width)additional data:bush bearing (ci material), size: 70 mm(od) x 41mm(id) x 55 mm(width) for esp internal.moc : bush c.i, set ring for collecting rapping for esp for esp faa-6x45-2x108135-2additional data:set ring for collecting rapping shaft for esp,moc: is 2062,, inner arm assy for esp #additional data: inner arm assy for esp # (inner arm assy foresp # material of construction : is 2062 fastner grade: 10.9 )., outer arm for collecting rapping big $for esp faa-6x45-2x108135-2 bheladditional data:hammer, outer arm for collecting, rapping (big) for esp outer arm-2, material of construction: round: en 8, arm: is 2062 pin: is 2062 ), shock pad for cerm for esp faa-6x45-2x108135-2 bheladditional data:shock pad (esp internal), 2nos hole of dia 17.5 mm. dimension:155mm x 80mm width x 29mm thickmaterial composition : gr 280-520w, is :1030., grip coupling for drive arngmnt eerm for esp faa-6x45-2x108135-2 bheladditional data:coupling for eerm (esp) grip coupling,moc: is 2062,en 8., coupling-i of collecting electrode rapngadditional data:coupling- i of collecting electrode rapping,moc: en 8, clutch of drive arrgt for cerm for espfaa-6x45-2x108135-2 bheladditional data:clutch for drive arrangement of collectingelectrode rapping, moc:en8., complete shaft for em rapping for esp type:f bhel total length=10380 mm,consist of 3 nos shaft(shaft-i:3720mm,shaft-ii:3590mm,shaftiii: 3050mm),2 nos sleeve tube & 2 nos set ringadditional data:d50, moc: en 8, is 8500,stage-i, pin wheel -i,eerm for esp faa-6x45-2x108135-2 bheladditional data:pin wheel - i of rapping mechanism for emitting electrode, moc: is 2062,en-362(pin with case hardening), pin wheel -ii,eerm for esp faa-6x45-2x108135-2bheladditional data:pin wheel - ii of rapping mechanism for emitting electrode, moc: is 2062,en-362(pin with case hardening), thrust bearing,eerm for esp faa-6x45-2x108135-2 bheladditional data:thrust bearing of rapping mechanism for emitting electrode, moc: fe540 , is 8500, pad,eerm for esp faa-6x45-2x108135-2 bheladditional data:pad of rapping mechanism for emitting electrode,moc: fg 260, is 210, shaft-i assembly,eerm,vertical for esptype:faa-6x45-2x108135-2 bheladditional data:shaft- i assembly of rapping mechanism foremitting electrode, length 2502mm,moc: en 8/is 8500, shaft-ii,eerm,vertical for esptype:faa-6x45-2x108135-2 bheladditional data:shaft- ii of rapping mechanism for emitting electrode,length 3350mm,moc: en 8/is 8500, shaft- iii of rapping mechanismadditional data:shaft- iii of rapping mechanism for emitting electrode,stage-i (length 3355)moc: en 8/is 8500, shaft end of complete shaft,gdrm for esptype:faa-6x45-2x108135-2 bhellength=1890mmadditional data:shaft end of complete shaft, ( gdrm,length 1890,3hole )moc: en 8/is 8500, shaft - ii of complete shaftadditional data: shaft - ii of complete shaft, ( gdrm,length 4990, 10hole )moc: en 8/is 8500, shaft - iii of complete shaftadditional data:shaft - iii of complete shaft,(gdrm, length 4205,8hole)moc: en 8/is 8500, shaft,complete shaftadditional data:shaft , complete shaft of collecting rapping-1(include end shaft, shaft-1, shaft-2) of length 790mm-2hole, 5090mm-17hole, 5285mm-18hole, ( 2 set ring ), d50moc: en 8/is 8500., complete shaft for cerm-ii bheltotal length= mm,consist of 3 nos shaft,2 nos sleeve tube-i & 2 nos set ringadditional data:stage-1 complete shaft total length= 10885mm, (shaft length 4985 mm, 5090 mm & 790 mm respectively, d50, moc: en 8/is 8500, sleeve tube for vertical shaft of eerm for esp faa-6x45-2x108135-2additional data:sleeve tube for v

CTN :40026633

06 May, 2025 NA

Gondal - Gujarat

Tender For supply of assembly leg support gas spring - as per attached specification and drawing (it em is used for tejas exp.) [ warranty period: 30 months after the date of delivery ]

CTN :40026638

06 May, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of assembly leg support gas spring for tejas express.as per attached drawing. [ warranty per iod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39970989

19 Apr, 2025 NA

Muzaffarpur - Bihar

Tender For supply of m4674990019-plain brg1-79-825-02473 10bhel , m4674990018-thrust brg1-79-817-02367 09bhel , m4674990017-outer arm17871602593 06bhel , m4674020005-bearing bush178-816-00311bhel , m4674036086-shock paddu0031-77-017-00737 08bhel , m4850905208-grip cplg1-79-017-00579 6bhelesp , m4850905216-outer arm-iibhelesp , m4850905250- pinwheel-i big 1-79-817-06172 6bhel , m4850905251- pinwheel-ii small 1-79-817-02367 7 , m4850905480- clamp8bhel4xfaa9x37 5m1001502 , m4850110018-inner arm , m4674016075-shock bar , m4674020013-emitting electrode boiler200 210mw

CTN :39855481

21 Apr, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of b and d spares of helo inflight fueling rig (hifr) - b&d spares ro palnt, gasket, circlip, spring, spg. washer/bonded seal, valve seal, spindle seal, spring, o ring, plain washer, seal, o ring, spring, o ring, spring retainer, circlip, stiff nut m6, plain washer, o ring, circlip, gasket, spring, circlip, o ring for piston, o ring for sleeve, o ring for bracket, diaphram, gasket for top flange, bonded seal, thread seal tape, locking pin/screw, o ring, o ring for top flange, o ring, bonded seal (popet seal), sealing ring, spring, circlip, spring, spring washer, valve seal, spring, spindle seal (bonded), seal, circlip, shim, o ring, spring, o ring, seal, gasket, seal, circlips, o ring, gasket, o ring, stainer, seal, gasket, gasket, o ring, o ring, o ring, spring, spring, o ring, earthing cable, teflon seal, gasket, gasket, pressure gauge, sealing ring for nozzel, sealing ring, o ring, hex head screw, o ring, oil seal, gasket, grease nipple, bolt assy., gasket, stainer, elbow assembly, lifting eye, screwed pin, lbc nozzel assembly, spider, spindle, spring retainer, valve half (inner), valve half (outer), valve tube, plunger housing, punger with head, taper pin, allen bolt, stiff nut, sinker weight assy., balls, retainer, shim, lbc adaptor assy., spindle, spider, coller, nr valve assy., spider, valve, retainer, spindle, retainer, long hose 50mm nb x 30 mtrs. long, o ring, sleeve, union, hose end pressure controller with staine, piston, piston rod, support plate, lock nut for piston, allen bolt, allen bolt ( body cover ), air connecting nipple, pressure gauge for air, pressure gauge for oil, allen bolt for sleeve, allen bolt, sleeve, special bolt, special screw, bush for spindle boss, spindle, pinion, sealing nut, spindle nut, allen bolt, allen bolt, adaptor assembly, bolt m6, 3-lug adaptor (m), plain washer, allen bolt, spindle, spring retainer, pressure plate, allen bolt, upb nozzle assembly, spider, spindle, plunger housing, spacial bolts, ball, stiff nut, washer, hook, spider, upper elbow assembly, vent valve body, nr valve assy., spindle, popet, spring, swivel price (swivel coupling assu.), adaptor, union, ball, short hose (3 mtrs ) with end connection, union, adapter assy., hose reel assy. (without hose), aircraft coupling, swivel adapter, valve retainer, 3-lug adaptor (f), valve, handle, thrust plate, cam follwer, roller for pin, allen bolt, allen screw, allen screw, screwed pin, screw, spherical balls, screw, screw, guard ring (hood), pressure blank (protecting cover assy.), allen bolt, chain for pressure blank, lower deck coupling, quick acting coupling body (m), union, quick acting coupling body (f), pull off tester (test rig) (test kit for, hydraulic pump, open shut cock, fule flow meter, tapper roller bearing, adapter gasket, 1-1/2n bsp male adaptor (union), rfuleling / trigger nozzle (1-1/2m), defueling nozzle(1-1/2m), shakle point (liftring eye ), locking mechanism for hose end pr.contro, rack, cam coupling

Central Government And Public Sector

CTN :39934010

07 May, 2025 NA

Nagpur - Maharashtra

Tender For supply of reclining mechanism for lhb ac chair car coaches to drawing no. judw/mech/18-676, with gas spring- make door care or similar & mdts-219 rev-02 dated 22.10.2013 [ warranty period: 84 months after the date of delivery ]

Central Government / Public Sector

CTN :39915480

21 Apr, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of seat recliner gas spring as per drg no. wr/c/cf/443/c item no.8 and 9 in set. one set consisting of item no. 8 & 9 each one no. before bulk supply sample must be checked and certified by c onsignee. [ warranty period: 12 months after the date of delivery ]

Gas Spring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector