Latest gas welding kit Tenders | Government gas welding kit Tenders

CTN :45602234

09 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of pricol paint remover , 25 mm gi pipe , nut bolt m.s , welding rod 2.5 mm , 4 inch ss hinges millinium , g.i mesh 20x20 roll , 25 x 6 csk head screw per packet , ms flat , spray paint , gloves leather , gate hook ss 6 inch , transportation charges , 9v battery connector , qr code scanner , 3.5 inch tft display with spi interface , 2 mm acrylic sheet , pvc board sheets , dc buzzer , tof distance sensor , 11.1v 4000mah battery , lm2596 buck convertor , tp 4056 battery charges module , esp32 micro controller , cell holder , 3.7 v rechargeable , rocker switch , arduino uno r3 , breadboard , heat shrink 5mm , 2.5 mm heat shrink , ribbon cable 10 wire , jumper wires , 9v battery , in 4148 diode , 1 kohm resistor , 220 kohm resister , active buzzer module , hcsr04 ultrasonic sensor module , npn transistor , glue sticks , adxl345 accelerometer module , push button * /bid number : gem/2026/b/7678952 + /dated: 18-06-2026 ' ' / bid document 1 / 34

State Government

CTN :45268513

30 Jun, 2026 NA

Bankura - West Bengal

Tender For corrigendum : supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at ibs uporgora under chhatna, saltora block sub-surface water based piped water - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

State Government

CTN :45268542

30 Jun, 2026 NA

Bankura - West Bengal

Tender For corrigendum : supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at intake kukrakuri under chhatna, saltora block sub-surface water based piped - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

corporations/Associations/Others

CTN :45502867

30 Jun, 2026 21.93 Lacs

Kozhikode - Kerala

Tender For material supply for the installation of 4 line hanging solar power fence at perambra estate - hanging solar power fence, p.p reel insulator-must be of virgin plstic material.polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avh, length 4.6 cm avg), strain insulator- must of poly polypropylene plstic rated for 15 kv uv stabilized,(weight 40gm avg, length 7 cm avg), gi post 12 feet-2" gi pipe guage thickness, total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6mm at end of bend pipe, intermediate post (t angle post)-6ft.,paited(25mmx25mmx3mm)having holes of size 6mm at required interval of fencing installation, supporting post- 10ft., gi-1",14 guage thickness,painted, stay (t angle)-2 ft., painted(25mmx25mmx3mm), 12 swg ht wire-12 guage,25mm dia high tensile with zinc coating for use as conducting wires for binding strain inulator, 14 swg binding wire- high quality zinc coating wire for binding reel insulators,tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade-1.5 mm stainless steel wire rop 304 grade, aluminium ferruel- aluminium ferrule inner dia 3mm, wire tightner- permanent wire tightner made of special aluminium alloy designed for kv,uv stabilized, earth rod- copper plated earth rod 14mm -3 ft. length, earthing compound- earthing compound 8kg, gate handle- gate handle and spring assembly. handle made of polyethyelene, leadout cable- lead out cable for fencie system double insulated gi cable inner core wire 2 sq.mm. hot dipped galvanlsed steel core, cable of with standing 15 kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable- 2.5 mm2 single core copper cable for connecting the solar panel to the tuber battery through charge control unit with required terminal sockets, nut and bolt, washer, lightining diverter- 15 kv rod gap arrester,must be capable of diverting stray lightining and adjustable for spark raps adequate earthing to be provided, 100 watt solar panel- 100 watt/12 volt and above poly crystalline with 10 year warranty having iec/mnre certification, charge control unit- 20a, 12/24 v pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer- energizer with 10 kv output safety standerds to be followed and bis 302-2-76 iec60335-2-76. switch high,medium and low power of settings, fence alarm system- fence alarm system conering area of 1.5 km, solar panel supporting stand with metal box painted ( for battery and energiser)- 18 guage thickness metal box (lockabe). gi sheet, painted should be capable of housing battery, charge controller and energizer and fixed with required clamps and nud and bolt on solar panel support stand made of gl pipe of 50mm daimeter and b class type with suitable arrangement for holding the panel, warning sign- polyethylene plastic with satuatory warning with signs, tubular battery 12v,100ah- 12v, 100 ah c10 rating with full 5 year replacement warranty(tower battery) for energising the energiser

Central Government/Public Sector

CTN :45527414

15 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of control pcb ed-99-13b with 110v output , welding transformer 42v , saw controller 110 pendent

CTN :45318628

18 Jun, 2026 10.17 Lacs

Rajkot - Gujarat

Tender For corrigendum : supply of hood dryer , d.c. shunt generator with 3phase squirrel cage induction motor , ac squirrel cage motor , solar street light , solar traffic light , d.c. shunt motor , shaded pole motor , dmx controller , battery charger , meter reading instrument , magnetic particle testing kit , plastic welding machine with hot air gun

CTN :45507056

20 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of coupling flange , pipe intake connection fuel complete tak , electrodes welding steel high tensile 4 , gen set controller , leather cloth black , plywood for general purpose mr aa 7 ply , relay

Central Government/Public Sector

CTN :45395882

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply, installation and commissioning including modification in axle box cover (axle cutting and welding scope included) for micro controller based electronic speed indicating and recording system to rdso spec no. mp.0.3700.07 rev-7 august-2017 for tower wagon scale range 0-120 kmph, voltage-24 vdc. each set comprising of: (1). recording cum indicator unit -01 no (2). speed indicator unit - 01 no (3). pulse generator-01 no (4). junction box with adopter plate -01 no (5). connecting cables-01 set of 04 nos (cab-1 to cab-2 cable length 35 meters). [ warranty period: 30 months after the date of delivery ] ]

CTN :45377381

16 Jun, 2026 14.60 Lacs

Chittoor - Andhra Pradesh

Tender For supply of spares for existing steam boilers available in ttd temples and institutions tirupati for the year 2026 27- 1/2 x 0.50 m metallic hose , 15mm nb size , 20mm nb size , 3/8 x 0.75 m metallic hose , asp-0 kolb - water filter p01rds0820 (thermax) , bearing piece , blow down limit switch (thermax) , burner rod assembly-0314824110 (thermax) , by pass valve 1/2" dia , cable high tension, pvc-0034121100 (thermax) , coil - psgcl10001 (thermax) , diesel transfer pump 0.5 hp 3 phase, flame proof , electrode assembly-0314613200 (thermax) , electrode cap-8611111100 (thermax) , engaging of welder 1st class for welding works in all canteens , filter 1/4" bsp (f)-8907111101 (thermax) , filter element - p01rds0770 (thermax) , for 100 kg/hr boilers , for 200 kg/hr boilers , fuel pump - as 47 a - p21esp0190 (thermax) , fuel pump an 67-8220125000 (thermax) , gland washer - p01rds0090 (thermax) , hardness test kit , hire charges for welding set whenever necessary by the department for attending the welding works in all canteens , hooter 4" dial, 220v-8610111500 (thermax) , nozzle 2.25 gph, 45 deg plp-8904112600 (thermax) , packing retainer , packing washer , photo resistor 8205, petercem-8603111400 (thermax) , piston htn-1-8110126900 (thermax) , pr. switch- 0.1 to 1.1 bar - p41ps1q/10 (thermax) , pr. switch- 1 to 16 bar - p41ps10040 (thermax) , pr.gauge,brdn- wpg, ss- & 25/nr @ p100-1w fpt- bt, mnfc - p61pg20010 (thermax) , pressure guage 0 to 25 kg-8451141800 (thermax) , pressure guage 0 to 40 kg-8451141900 (thermax)) , pressure switch pm - 1po-w-8441133200 (thermax) , pressure switch pvf 16 (thermax) , pump- d' kolb- simplex, 200 lph - p01rd10010 (thermax) , pump, simplex-8110125000 (thermax) , resin , rxa-02 coil- prxcl 10004 (thermax) , rxa-02 economizer- prxec10016 (thermax) , rxa-02 optomizer-prxec10017 (thermax) , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per ls - class - l, indian make heavy type - 20 mm nb size , s & f gunmetal gate (gm peet) valve as per is - 778 class - i, indian make heavy type , sequence controller ma 810-8605111600 (thermax) ) , sight glass (thermax) , softener 40 nb multi port valve & fittings (thermax) , supply of ball valve 25nb ci f/e (thermax) ) , supply of electronic timer- p42g210050 (thermax) , supply of photo cell for sg-005 (thermax) , supply of steam stop valve bronze bspt 25nb- p33lg20050 (thermax) , supply of the following materials required for the maintenance of steam boilers available in ttd temples & institutions at tirupati. (the following rates are excluding gst) , supply of the following spare parts required for thermax boilers available at various places, hostels in tirupati and tiruchanoor. (the following rates are excluding gst) , temp. element pt-100, with cable 2.5 m - (thermax) , temperature controller 0-400, dtc/2 v.trafag-8421117200 (thermax) , thermometer 0-120 deg, 63 mm dial-8481126000 (thermax) , transformer 14.5 kv-8609111100 (thermax) , valve seat assembly , valve seat assembly.(htb-3tohtb-6) - p01rds0320 (thermax) , valve, ball 3/4" bspt-9770101900 (thermax) , valve, needle- ss 304 (thermax) , valve, non r-om-thd- 1/2" bspt, mnfc - p33ng2001m (thermax) , valve, safety 25mm, 150-250 psi-9722122400 (thermax) , washer gland

Central Government / Public Sector

CTN :45227830

17 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of digital controlled igbt inverter based mig/mag welding system with remote management controller. [ warranty period: 30 months after the date of delivery ] ]

Gas Welding Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector