Latest gate pillar Tenders | Government gate pillar Tenders

Central Government/Public Sector

CTN :41535713

13 Sep, 2025 45.00 Lacs

Mumbai - Maharashtra

Tender For day to day b/r maint service including internal water supply at area-i and repair to rcc jallis, gates, pillars of security wall and gates and other connected items for zone-iv of age b/r (west) at colaba, mumbai

CTN :41518613

01 Sep, 2025 NA

Jaisalmer - Rajasthan

Tender For supply of structural steel post of angle iron 60x60x5mm 3.70 mtr long weight as per is 2062-1984 as per technical specification , structural steel post of angle iron 60x60x5mm 3.60 mtr as per technical specification , supply galvanised two strand steel barbed wire line wire 2500 rm of 2.24mm diameter of wireas per technical specification , supply galvanised steel chain link fence fabric of mesh size 125 mm x125mm as per technical specification , supply ms flat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia as per technical specification , supply mild steel bolts12mmdia50mm long with6 holes15mm dia as per technical specification , supply ms round bars 10mm dia with hook on both sides as per technical specification , supply steel main gate. steel gate 5.5 mtr wide with 02 nos of gate pillar as per technical specification , supply cement opc 43 gradeas per technical specification , supply sand coarse as per technical specification , supply stone aggregate 20mm nominal sizeas per technical specification , supply gi binding wire 1.2mm dia , supply lime chuna , supply synthetic enamel paint , s upplythinner for paint ) /bid number : gem/2025/b/6595009 * /dated: 21-08-2025 & & / bid document 1 / 17

Central Government/Public Sector

CTN :41491083

06 Sep, 2025 9.99 Lacs

Raiwala - Uttarakhand

Tender For repair and maintenance of fencing, footpath/ hardstanding, boundary wall gate pillar etc raiwala mil stn under age (i) raiwala

Central Government/Public Sector

CTN :41472058

08 Sep, 2025 48.00 Lacs

Jabalpur - Madhya Pradesh

Tender For repair to compound wall, fencing, barbed wire, gate, gate pillars, footpath, hard standing and miscellaneous repair work in the area of age b/r-iii under ge (west) jabalpur

Central Government/Public Sector

CTN :41491059

09 Sep, 2025 30.00 Lacs

Bhopal - Madhya Pradesh

Tender For repair, maint and replacement to boundary wall, fencing, gate pillar and drainage system dronachal base under ge dronachal

CTN :41289214

18 Aug, 2025 NA

Imphal - Manipur

Tender For bid to ras supply of sheathed unarmoured stranded copper conductor cable of size 1sqmm conforming to isi marked 90m roll , pvc sheathed unarmoured stranded copper conductor cable of size 1.5sqmm conforming to isi marked 90m roll , flexible cable twin twisted roll of 90 mtr 23 0.0040 , 2 core cable aluminium 10sqmm 90m roll , 2 core cable aluminium 6sqmm 90m roll , ceiling fan 1200mm sweep with electronic regulator conforming to is , fan condenser 2.5mfd , wall mounted fan 400mm sweep conforming to is , pedestal fan 400mm sweep , exhaust fan 300mm sweep conforming to is , fan regulator electronic dimmer type conforming to is , led batten surface 4 ft long 18w output 1600 lumens per watt with suitable powder coated frame end caps and connector , led bulb 9w, 220-240 volt , led bulb 12w, 220-240 volt , pvc casing capping 25mm conforming to is , thimble 35mm , insulation tape , conduct pipe 1 inch , pvc flexible pipe 1 inch , switch socket combination 15 amp 240v with gang box isi marked , switch socket combination 5 amp 240v with gang box isi marked , socket 3 y 5 pin 5 amp 240v isi marked , socket 3 y 6 pin 5 y 15 amp 240v isi marked , security light 100w , gi pipe 20mm bore 6m long , gi pipe 15mm bore 6m long , gi tee 20mm , gi tee 15mm , gi socket 20mm , gi socket 15mm , gi elbow 15 mm , gi elbow 20 mm , gi nipple 20mm bore 100mm long , gi nipple 15mm bore 100mm long , gi nipple 15mm 6 inch , stop cock l type , pvc swr pipe 110mm dia 3m long with socket end isi marked , pvc swr pipe 75m dia 3m long with socket end isi marked , pvc socket 110mm , pvc tee 75mm , pvc tee 110mm bore , pvc tee 75mm bore , pvc bib cock 15mm , cp cast copper alloy piller cock long body 15mm , union 20mm , union 15mm , reduser socket 15x20mm , angle cock stainless steel , long piller cock double , small foundation bolt , foundation bolt 2 inch , ordinary portland cement 43 grade in hdpe bags of 50kg each, confirming to is 269-1976 , coarse sand dimapur sand conforming to is 383 - 1978 , coarse aggregate crushed stone 20mm graded , coarse aggregate crushed stone 40mm graded conforming to is 383 - 1979 , coarse aggregate crushed stone 63mm graded conforming to is 383 - 1979 , bricks sub class b old size best locally available minimum compressive strength 75 kg sqcm water absorption not more than 20 percentage , glazed ceramic coloured tiles of size 300mm x 300mm x 7- 8mm thick , mild steel tmt bars 16mm dia and over for reinforcement isi marked , mild steel tmt bars 10mm dia and over for reinforcement isi marked , chequered cement concrete tiles red clolour 300mm x 300mm 20mm thick conforming to is , galvanised steel two strand barbed wire 2.24mm dia of wire 2 mm dia barbs at 75 mm spacing confirming to is 278 of 1978 , ro membrane 4040 , 1 hp motor , oil filter 40 kva genr set , fuel filter 40kva genr set , air filter 40kva genr set , fan belt 40kva genr set , engine mounting pad 40kva genr set , fuel pipe 40kva genr set , tapped gaskit 40kva genr set , cyl head gasket 40kva genr set , oil filter set 58.5kva genr set , fuel filter set 58.5kva genr set , air filter set 58.5kva genr set , fan belt set 58.5kva genr set , fuel pipe set 58.5kva genr set , cyl head gasket set 58.5kva , change over 63 amp tpn 240 volt

Central Government/Public Sector

CTN :41425398

03 Sep, 2025 NA

Bangalore - Karnataka

Tender For tender for supply of carpentary items e e - 6 mm playwood(size - 8ft x 4ft) (grade - bwr) printed isi logo on plywood sheet with cm-l number , 12 mm thick ply wood(size - 8ftx4ft) (grade - bwr) printed isi logo on plywood sheet with cm-l number , 19 mm thick ply wood(size - 8ftx4ft) (grade - bwr) printed isi logo on plywood sheet with cm-l number , 25 mm thick ply wood(size - 8ftx4ft) (grade - bwr) printed isi logo on plywood sheet with cm-l number , fevicol (sh) packing size- each 1 kg per tin , fevicol (sr) packing size - each 1 ltr per tin , touch wood polish packing size - in 1 ltr can touch wood interior wood finish of isi manufacturer , french polish packing size -1 ltr per can french polish of isi manufacturer , decolam sheet 0.8 mm thick (size - 8ftx4ft) colour - milky white of isi manufacturer with isi logo on the sheet , decolam sheet (thickness - 0.8 mm) with teak wood grains size - 8ft x4ft of isi manufacturer with isi logo on the sheet , particle board (thickness - 9 mm) both sides laminated (with one side ivory colour and on the other side milky white) , size - 8ftx4ft of isi manufacturer with isi logo on the sheet , plain glass 4 mm thick (size - 3ft x 4ft) of isi manufacturer , plain glass 4 mm thick (size - 4ft x 4ft) of isi manufacturer , glass putty (lappa) (5 kg) packets packing size - each 5 kg , door closer-alluminium aluminium extruded section , door stopper rubber bush long type material - aluminium and length - 100 mm , ss butt hinges (size - 5inch) , tower bolt (size - 6inch) ms , s1tainless steel pad lock (size - 2inch) , stainless steel pad lock (size - 3inch) , stainless steel pad lock (size - 4inch) , ms thick nails (size - 1inch) , ms thick nails (size - 1 1/2inch) , ms thick nails (size - 2 inch) , ms thick nails (size - 6 inch) , ms thin nails (size - 1 inch) , ms nails thin (size - 1 1/2inch) , ms thin nails (size - 2inch) , ss concrete nails (size -1inch) , ss concrete nails (size - 1 1/2inch) each pkt - 1 kg , ss concrete nails (length - 2inch) , ms shoe nails (size - 3/4inch) , 18 inch telescopic sliding channels for table drawers material - chromium plated metal body , hacksaw blade (single side) material - high carbon steel , length - 300 mm , width of blade - 25 mm , thickness - not less than 0.63 mm and no of teeth - 18 nos , hacksaw blade (double side) material - high carbon steel length - 300 mm , width of blade - 25 mm , thickness - not less than 0.63mm and no. of teeth -18nos , wood cutting blade 7inch dia material - tungsten carbide , thickness - 2.6 mm , heaxagonal head nut and bolt with washer size - m6 x 75 m and material - stainless steel , ss window fly mesh size - 1ft wide x 25 mtrs length , material ss wire guage(304grade) avg. width aperature 1.4 mm wire dia 0.5 , ss metal drill bit (size - 3 mm) , ss metal drill bit (size - 5 mm) , zigsa machine blade (smooth) material - high carbon steel / bimetal (hss) , length - 20 cms and width - 2.00 cms , zigsa machine blade (rough) material - high carbon steel / bimetal (hss) , length - 20 cms and width - 2.00 cms

Central Government/Public Sector

CTN :41381602

29 Aug, 2025 30.00 Lacs

Bhopal - Madhya Pradesh

Tender For repair, maint and replacement to boundary wall, fencing, gate pillar and drainage system dronachal top under ge dronachal

Central Government/Public Sector

CTN :41389802

29 Aug, 2025 NA

Coimbatore - Tamil Nadu

Tender For repair/maint of maint of boundary wall, gates, gate pillars, pcc coping, jaffari wall other miscellaneous works in domestic area at afs sulur

Central Government/Public Sector

CTN :41360747

20 Aug, 2025 97.0 Thousand

Kanpur - Uttar Pradesh

Tender For corrigendum : job order for provn of signage board over entry gate pillar of rhino gate at kanpur cantt

Gate Pillar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors