Latest gate valve Tenders | Government gate valve Tenders

State Government

CTN :41095098

23 Jul, 2025 19.67 Lacs

Delhi - Delhi

Tender For fixing up of sanitary fittings and fixtures including opening and fixing of gate valves on terrace, replacement of chocked and jammed pressure release valves, leakage in ppr pipes union and joints in the shaft area up to 12th storey housing pocket

corporations/Associations/Others

CTN :41079648

28 Jul, 2025 21.49 Lacs

Karkala - Karnataka

Tender For leakage repair in distribution network and repair and maintenance of gate valve in water supply system in the limit of karkala town municipal council for the year 2025-26

State Government

CTN :40565553

29 Jul, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of high pressure valves (ibr approved) for wtps. - bhel make complete assembled globe valve, size: 1/2", class-2500. fas, f-22, glv, sw, h.o. back seat arrangement., bhel make: complete assembly of globe valve, size-1" (25-nb), class-2500, fas-f-22, glv, sw - ho, back seat arrangement., bhel make complete assemble globe valve, size: 1 1/2" (40-nb), 2500-class, fcs (a-105), glv, sw, ho, back seat arrangement., h.p.glv 65 mm (2 1/2") cl2500 wcb , bw ho, globe valve size 1.1/2" (40 mm), c-1500, glv-sw-mo-a105 without actuator, forged carbon steel globe valve size : 25 mm, 800, globe valve size 1" class 1500 mat-a-105, 1" nrv 1500 cl fcs valve po.no.502, high press valve size 1 1/2 (40 mm) class 1500 globe valve, globe valve, type-glv, size-40mm(1 1/2" nb), 2500class, socket weld ends, mat: a105, motor operated with actuater, angle type regulating globe valve 1 1/2"(40nb) for cbd of boiler stage-1, c2500 ,4" (100 mm) ,glv-bw-hw- wcb t pattern for bhel make high pressure globe valve, globe valve cl-1500 si-1"-sw hw f-22, motor operated globe valve class 2500 size 65 nb (h.p.& h.t.) pr- 234 kg/cm2 temp- 300 c with actuator, c2500 3/8 sv-sw-hw-a-105 saturated steam sampling valve., globe valve 1-c2500-sv-sw-hw-a105, high pressure globe valve size 2" ,2500, ibr approved high pressure globe valve glv 2 1/2 2500 wc9 bw hw, t-type, normally operated, class-2500, working pressure-160 kg/cm2, working temp. 5400 deg.c., bhel make complete assembly of hand operated 2500 class, 100nb globe valve ; fas f22s (4"-c2500-glv-bw-ho-wcb), globe valve, size 2" (50 nb), cl 2500, f22, motor operated, ibr approved high pressure globe valve-1.5 inches class 1500, globe valve 3/8" glv f316 sw 2500 f316 sw, 1500 class ( 1 " ) globe valve, nrv, class-2500, size- 1", fcs(a105), sw, bhel, globe valve cl-800 si-1"glv-sw-hw a105, high pressure globe valve size 1/2" a-182 f22 1500 class, globe valve, cl-1500, size-2", sw, hw, f-22, ibr approved manually operated, bolted bonnet, flanged end cast carbon steel gate valve. size: 150 mm nb, class: 600, ibr approved manually operated, bolted bonnet, butt weld end cast carbon steel gate valve. size: 200 mm nb, class: 600, forged alloy steel globe valve size:1/2",2500

State Government

CTN :40565555

29 Jul, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of low pressure valve for unit no. 1 to 8 at wanakbori tps. - rubber lined diaphragm valve size 100 mm (4), novel make, metal: cast iron., rubber lined diaphragm valve size 150 mm (6), novel make, metal: cast iron., neoprene 100 percent pure rubber diaphragm 100 mm, gate valve 150,size 25 mm (1"), complete valve assembly for 40 nb gate valve, gate valve 150 size:50 mm ( 2" ), ccs gate valve class-150 65 nb, cs gate valve 80 nb, cs gate valve 100 mm dia, cs gate valve size 150 mm (6") nb, 150 flanged type, cs gate valve class-150,200 nb (8"), c.i. gate valve 250 mm dia, gate valve size 300 mm nb (12") 7.5 kg/cm2, gate valve class-150,350 mm nb, ci globe valve size 100 nb (4") 150 flang e to flange 292 mm pcd 191, c.i.ball valve size 1" bsp, class 150, internal thread at both end, 50 nb ball valve, gun metal gate valve size 15 mm (1/2"), is-778, class-i, screwed female end., gun metal gate valve size 20 mm (3/4"), is-778, class-i, screwed female end., gun metal gate valve size 25 mm (1"), is-778, class-i, screwed female end., g.m.globe valve size 32 nb, gun metal wheel valve-40mm, gun metal valve 2", gun metal globe valve nb 50, is -778, 450 mm butterfly valve, cs nrv check valve 80nb, ccs swing check non return valve 150,100 nb (nrv), ccs swing check non return valve 150,200 nb (nrv), cs globe valve class-150,200 nb (8"), ss-316, astm a 351 gr. cf8m, ball valve, size: 40mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., ball valve size 1.1/4", ss-316, astm a 351 gr. cf8m, ball valve, size: 25mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., s.s.316 ball valves, size: 15 nb, pressure withstand : 60 kg/cm2, both end threaded., nrv flap 125 nb for dm plant unit-8, ci check valve size 65 mm (nrv), non return valve size 50 mm, globe valve nb20, globe valve 1500,1/2" nb, gate valve size 1 1/4", globe valve 80 mm, cs gate valve class 150,size:125 mm, swing check valve (nrv), size 65 nb with epdm rubber lining for dm plant., ci ball valve size 1/2" bsp,150, internal thread at both end, g m gate valve 40 mm (1.1/2"), butter fly valve 150 nb, swing check valve (nrv) size-450 mm standard-bs 1868 rating-asa 150 body & bonnet-astm a 216 gr wcb disc-wcb+13 percent cr overely trim-aisi 410 operating pr -5 to 8 kg/cm2, cs non return valve (nrv) ,size 350 nb (14") ,class: 150, ss 50 nb gate valve, c.i.globe valve 150nb, flanged type, flange to flange 355 mm, p.c.d.-245 mm with 8 no of holes

Central Government/Public Sector

CTN :40828000

31 Jul, 2025 NA

Gayzing - Sikkim

Tender For corrigendum : supply of gate valve, size-dn 200mm, class-150 make- leader valves limited, 8" (200 mm) , cast steel gate valve , gate valve, size-150mm, class-150 make- leader valves limited, 6" (150mm) , cast steel gate valve, cla

corporations/Associations/Others

CTN :41096507

30 Jul, 2025 NA

Salem - Tamil Nadu

Tender For tgmca division inspection of scrapper and rubber squeezer painting the ms structures in clarifier ,opening the manhole doors over the launder portion of clarifier for cleaning overhauling of flocculators 3and 4overhauling the gate valves

Central Government/Public Sector

CTN :41084837

01 Aug, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of koel da rkit 25 and ard 24 spares - cgsd (mbi), automatic voltage regulator, model avr r450, make leroy somer, service kit for sea water pump - sw23/24/26/28 - long yoyage, i/o module with 8 ai(4.20ma), oil level sensor, set of joints, hp pipe set, pressure transmeter(danfoss make,type mbs 3250,range 0 to 10 bar), 0-2.5 bar danfoss make pressure transmitter for marine, leak off pipe (uniflex), injector, fuel filter cartridge(for dup lex fuel filter), set of copper washers, magnetic pickup sensor, belt for sea water pump drive, water level switch, wire braided pipe from jacketed leak off to fuel, lub oil pressure sensor with switch three point dual wiper type, breather hose for marine, leakoff pipe for hp jacketed pipe (lh), top ring, s.s joint(4), second ring, big end bearing (std), connecting rod bolt, rc joint, valve cup, counter shunk head screw (for dv injector leakoff), s.s.nut, joint (bet.inlet manifold and cyl head), set screw - m8x1.25x25-8.8, plain machined washer-m10, joint (for suction tube flange), nut-m10x1.5-gr.8, stud-m10x1.5x25-8.8, set screw m8x1.25x25...8.8, plain machined washer - m8, set screw - m8x1.25x22-8.8, washer copper, plain machined washer, washer copper for lub oil pipe, washer copper (18x22), copper washer, nozzle body (for oil spray nozzle), sealing cap (40 din 443)8, vent pipe, air shut off valve, exhaust valve, washer copper, stud m10x1.5x35 - 8.8, nut-m10x1.5-gr.8, service kit for centrifugal filter, alternator(2 wire), support for expansion tank, support for expansion tank, support for expansion tank, support for expansion tank, support for expansion tank, plate for thermostat, k sealant (80 ml), joint cooler cover (rh), joint for cooler cover (modified), joint cooler cover (lh), special bolt (233 mm.long) (for integral cooler cover), dome nut for lub oil cooler, special bolt for intergal cooler cover, joint (for thermostat housing), o ring (dia.29) for element oil cooler, set of gasket for heat exchanger, avr, preline filter cartridge, lub oil filter, lub oil pressure switch (4-20 ma), lub oil filter, conical copper washer, valve seal, drain cock, cup for p r tube, rubber bush (top), copper washer, hose clip, wire braided pipe from jacketed leakoff to fuel collector, banjo bolt, coil spring loaded level-edged oil ring piston, inlet valve seat (finish), exhaust valve seat (finish), valve guide (finish), rubber bush (bottom), joint for cac water, breather pipe, make up pipe, fuel pipe (pre-filter to leak off pipe), joint for t connection, leak off pipe (from hp pipe to collector), anti vibration mount - cori, stud, hose clamp, hose t bolt, o-ring for drain plug, 5.6 mm copper washer, o ring for injector, oil filling body o ring, banjo bolt for return line, set bolt-m12x1.75x70-8.8, nut-m12x1.75-gr.8, nut-m14x2-gr 8.8, plain machined washer-m12, plain machined washer-m14, grommet for 12 dia ferrule, grommet for 22 dia ferrule, ferrule(12dia), ferrule 22 dia, grommet support washer 20.2, grommet support washer for dia 31.5, gasket(lub oil header), joint(for flange)for t/c luboil outlet pipe, gasket between oil sump and centrifuge adaptor, dowel bush(for alt. mtg. bracket), alternator pulley, dowel bolt for micro alternator, turbo oil supply pipe(lh), joint between cac &turbo adaptor, sea water outlet pipe from cac, k-cool super plus, ball bearing 6305-2rs1, lub oil filter sub assembly, low water level tank switch, npt plug with zinc bar with he, thermowell for lo temprature sensor, voltage established relay -24v dc, cgsd(chn), fuel filter cartridge, sea water pump, avr (automatic voltage regulator) for cg alternator, pipe lub oil filter header remote, rra assembly for 150 kva alternator, joint for inlet manifold, joint for supply turbo charger, joint for exhaust manifold, r rings, set of joints, k sealant(80 ml), fuel level (leakage) off sensor, oil pipe (lg-675), big end bearing (top std), big end bearing (cap end-bottom std), gpu-3, main bearing(top) std, primary element/air

Central Government/Public Sector

CTN :40852272

23 Jul, 2025 45.00 Lacs

Gurgaon - Haryana

Tender For corrigendum : maint and repair to diesel generator set external water supply submersible pumps booster pumps sets replacing of old u/s di/gi tubing gate valves sluice valve and periodical maint and servicing oft acs and replacement of lt ug cable lt panel securtiy light and c

Central Government/Public Sector

CTN :40852275

23 Jul, 2025 43.50 Lacs

Gurgaon - Haryana

Tender For corrigendum : maint and repair to diesel generator set external water supply submersible pumps booster pumps replacing of old u/s ci/ di/gi tubing gate valves sluice valve and periodical maint and servicing of ro plant acs and replacement of lt ug cable lt panel securtiy light

Central Government/Public Sector

CTN :41084912

06 Aug, 2025 NA

Pathankot - Punjab

Tender For repair/replacement/maint water supply system, sluice valves, gate valves, automation panels, motors, sensors, gi/di pipe line and connected works under ge(west) pathankot

Gate Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors