Latest gate valves Tenders | Government gate valves Tenders

Central Government/Public Sector

CTN :40061532

10 May, 2025 46.00 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For repair maint of external pipe lines, gate valves, sluice valves and reapir of centrifugal pump and motors and flushing/cleaning maintenance of borewells, repair/replacement of submersible cables, column pipe, submersible pump motors and connect

Central Government/Public Sector

CTN :40054739

02 May, 2025 NA

Raipur - Chhattisgarh

Tender For biennial rate contract with m/s orbinox india pvt. ltd. for supply of knife gate valves and its spares.

Central Government/Public Sector

CTN :40058094

08 May, 2025 NA

West Tripura - Tripura

Tender For procurement of hp gate valves for drilling fluid handling application

Central Government/Public Sector

CTN :40044373

08 May, 2025 36.00 Lacs

Kamptee - Maharashtra

Tender For repair/replacement and maint of gi/di/upvc/ms distribution pipelines, sluice valves, gae valves, gate valves, float valves, pump set, motor, starter panel and main raising di ci --- otm, married accn in kamptee area under ge kamptee.

State Government

CTN :40021079

05 May, 2025 36.66 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of knife gate valves for ash handling plant of ph i and ph ii 4x210 mw units at sgtps mppgcl birsinghpur

CTN :40029727

30 Apr, 2025 21.52 Lacs

Bapatla - Andhra Pradesh

Tender For supply & fixing of ms pipes and gate valves at wtp, repairs to wtp in repalle municipality . (under 15th fc grant)

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

State Government

CTN :40015307

22 Apr, 2025 NA

Multi City - Telangana

Tender For supply of spares for orbinox make 300nb knife gate valves

Central Government/Public Sector

CTN :40004860

24 Apr, 2025 NA

Sundergarh - Odisha

Tender For tender for supply of gate valves - as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification

CTN :39992210

15 Apr, 2025 8.31 Lacs

Guntur - Andhra Pradesh

Tender For supply & delivery of leaks arresting materials in gorantla and nagaralu area div no.46,47 & 48 under guntur municipal corporation. - 200mm dia class 15 cid joints, 160mm dia class 15 cid joints, 100mm dia class 15 cid joints, 80mm dia class 15 cid joints, supply and delivery of 6mm thick rubber packing including taxes and conveyance etc complete as per ss, supply and delivery of bolts and nuts (1/2" to 1") including taxes and conveyance etc., complete, manufacture, supply and delivery of the following hdpe pipe and spl of approved by the departmental authorities and including cost and conveyance of all materials and all type of labour charges for fabrication, painting etc., complete., 160 mm dia hdpe pipe , 110 mm dia hdpe pipe , 90 mm dia hdpe pipe , manufacture, supply and delivery of hdpe specials including tranportation to anywhere in ap excluding excise duty sales tax and specials etc. complete , a) 160mm dia hdpe pipe end long necks, b) 160mm dia ms flanges , c) 160mm dia hdpe dummy , manufacture, supply and delivery of the following pvc pipe and spl of approved by the departmental authorities and including cost and conveyance of all materials and all type of labour charges for fabrication, painting etc., complete., 200 mm dia pvc pipe , 75 mm dia pvc pipe, 90 mm dia pvc pipe, 80 mm dia pvc coupling, supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bonnet of ductile iron ggg-40/sg-400/15 or ggg-50/sg-500/7 or equivalent as per is1865, is:3896-2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3-o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100% leak proof with face to face dimensions as bs:5163 type a/is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside (min 250 microns)-ral 5005 with pocket less straight through body passage conforming to design standards of din-3202f4/bs:5163 type a flange drilling as per is - 1538 excluding all taxes, duties and transportation., 100mm dia sluice valve , 150mm dia sluice valve 80mm dia sluice valve

Gate Valves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector