Latest gauge conversion work Tenders | Government gauge conversion work Tenders

Central Government/Public Sector

CTN :45730434

21 Jul, 2026 NA

Vadodara - Gujarat

Tender For "design, supply, installation, programming, testing and commissioning of newhot standby electronic interlocking system at waghodiya , jarod and lotnastations and ei alteration at dabhoi and samlaya station along with supply,installation, testing and commissioning of various indoor and outdoor signalingsystem with bpac in dabhoi-waghodiya -jarod - lotna-samlaya section inconnection of provision of gauge conversion work under dy. cste construction,vadodara, gujarat (western railway)

Central Government/Public Sector

CTN :45713850

11 Jul, 2026 27.00 Lacs

Delhi - Delhi

Tender For repair/replacement to doors, window, ventilators, cupboards, flooring/ plastering, tilling and other miscellaneous joinery /sanitary items at af stn aastha complex, 5 aflu under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no 02.00 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., taking down chowkhats or frames with shutters not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down chowkhats or frames with shutters exc 1.5 sqm but not exc. 4 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down shutters of any description n exc 1 sqm each complete all as specified and directed., taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed., s&f for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed., s & f solid pvc door frame of size 50 x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube incl taking down old frame any type complete all as specified and directed., s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be convered with heat moulded plain colour pvc `c channel having a pvc sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour pvc sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain c

Central Government/Public Sector

CTN :45724131

07 Jul, 2026 NA

Kota - Rajasthan

Tender For auction sale of pway scrap - pl no. 98050035, ms-slide chair psc. special barring plate of 1 insert, sej brakate (3 hole) with coller & stopper. sej breakate (2 holc). sej breakate (3 hole) with coller. sej breakate (3 hole) without coller, special bearing plate off size, signal rode with p breakate half size, signal rode with lug. signal rode with p breakate full size, streture bar half size with breakate, streture bar half size with breakate & lug, streture bar half size with breakate (small), complete streture bar, guage tie plate with p&c, guage tie plate with moter plate, guage tie plate with i breakate, guage tie plate with 1 without breakate/motor, lc breakate with bolt, lc breakate of check rail without bolt, glued joint mtr. plate 60 kg, glued joint mtr. plate 52 kg. 52 kg joggle plate, 60 kg joggle plate (wide gap), 52 kg 610mm fish plate, 60 kg 610mm fish plate, motor/c plate, rail 60 kg below 1 mtr., rail 52 kg below 1 mtr., rail 87 lbs below 1 mtr., rail 90r below 1 mtr., rail narrow gauge, rail double headed, chek rail 90r lc with tie bar, chek rail without flenz, sej ord. t/r end piece, improved sej 6902 t/r end piece, sej ord. special repair end piece, etc. with attachment if any. 72.280 mt. for stock holder sse/pw/s/kota. ss11 no.-sse/pw/s/kota/p&c-ms/2025-26/03 dt.02.03.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight on government approved dharam kanta only. the material are lying in rajasthan state.

Central Government/Public Sector

CTN :45724132

07 Jul, 2026 NA

Kota - Rajasthan

Tender For auction sale of pway scrap - pl no. 98080106, ci-off size breakate t/r & special repair rail, breakate p&c. distance block p&c, distance block p&c. distance block p&c, distance block p&c. heal block p&c, distance block p&c, heal block p&c, xing block with 3 hole (rt-4987), xing block with 2 hole (rt-4987). xing block with 4 hole (rt-3405). xing toe block with 3 hole (rt-4121), xing heal block of 3 hole (rt-2716), sej plate 6 hole, sej plate 4 hole, lc breakate without bolt etc. with attachment if any. 22.731 mt. for stock holder sse/pw/s/kota. ss11 no.-sse/pw/s/kota/ci/2025-26/04 dt.02.03.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight on government approved dharam kanta only. the material are lying in rajasthan state.

Central Government/Public Sector

CTN :45724134

07 Jul, 2026 NA

Kota - Rajasthan

Tender For auction sale of pway scrap - pl no-98011285 ms (p&c) scrap consisting of t/r and special repair 52kg, improvement sej 52 special repair, improvement sej 52 special repair, cut picec of t/r & special repair and cut picec of lc check rail. 16.374 mt. for stock holder sse/pw/mlgh. ss-11 no.-sse/pw/mlgh/misc/2025-26/08 date 06.02.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery in dry season only. note-cutting may be allowed for easy loading at the time of delivery if required. delivery will be given by actual weight on government approved dharam kanta only. the material are lying in rajasthan state.

State Government

CTN :44997657

09 Jul, 2026 NA

Ukai - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt-5155g - (mmd hps) - work of overhauling / servicing of gear box, & rail alignment of gantry crane having 25 t capacity for dt gate of 4 x 75 mw units, hps, ukai; over..

CTN :45706560

08 Jul, 2026 NA

Saharanpur - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; supply of 01 set 02 pieces per set new end carriages of both sides for 05 ton capacity can unloader installed at mill house including heavy duty box type ..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; supply of 01 set 02 pieces per set new end carriages of both sides for 05 ton capacity can unloader installed at mill house including heavy duty box type ..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to convert the existing central single shaft drive system into double end drive system for operation of lt rail of 05 ton capacity can unloader 02 nos mot..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; to convert the existing central single shaft drive system into double end drive system for operation of lt rail of 05 ton capacity can unloader 02 nos mot..

corporations/Associations/Others

CTN :44992141

15 Jul, 2026 2.87 Crore

Dehradune - Uttarakhand

Tender For corrigendum : providing of repair and overhauling service - fi pump, injector and common rail for buses (tata/leyland) as per details in bid document; bosch; yes; buyer premises, service provider premises

Central Government/Public Sector

CTN :45692514

06 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For work contract to carry out eot crane rail track alignment repair works at bhel- hpvp, visakhapatnam

CTN :45697963

06 Jul, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of repair and calibration of common rail pump assy srl no lw0445025043 make bosch of l and t wheel loader em no 22q 32768 of 108 rcc , repair and calibration of injector no 01 , repair and calibration of injector no 02 , repair and calibration of injector no 03 , repair and calibration of injector no 04 , repair and calibration of injector no 05 , repair and calibration of injector no 06

Gauge Conversion Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors