Latest gc sheet Tenders | Government gc sheet Tenders

State Government

CTN :43117006

17 Dec, 2025 NA

Delhi - Delhi

Tender For procurement of hardware items for day to day maintenance of various tube wells installed in 185 and 186 under okhla constituency ac-54. - supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal(a) 50mm dia., (b) 40mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes:(a) 50mm dia., (b) 40mm dia, fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes:(a) 50mm dia., (b) 40mm dia., fabrication and supply of bore cover approx size lx1 made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2" dia. with locking arrangement by nuts & bolt., supply of ms full threaded nut bolts off sizes., supply of rubber packing (a) 50mm dia flange, (b) 40mm dia flange

State Government

CTN :43117029

17 Dec, 2025 NA

Delhi - Delhi

Tender For sic of submersible pump set and all allied e/m equipment for rebored tube well near h.no.-116c shahpur jat in greater kailash constituency ac-50. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 10 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point:200 lpm on 90 mtr. head. having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved make, supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted.a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no.b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 noc) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no.e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable bankingg) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos. complete wiring & installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated & pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs.make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., s/o nut & bolts of 1/2 dia of different size i.e. 1.5 dia& 2.5 long full threaded., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 8-10 inch diameter made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2 dia. with locking arrangement by nuts & bolt., earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

State Government

CTN :43117042

17 Dec, 2025 NA

Delhi - Delhi

Tender For procurement of hardware items for day to day maintenance of various tube wells installed in ward no-180 and 181 under badarpur constituency ac-53. - supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal50mm dia., supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal 40mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes:50mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes: 40mm dia., fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes:50mm dia., fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes: 40mm dia., fabrication and supply of bore cover approx size lx1 made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2" dia. with locking arrangement by nuts & bolt., supply of ms full threaded nut bolts of sizes., supply of rubber packing 50 mm dia pipe flange, supply of rubber packing 40 mm dia pipe flange

State Government

CTN :43117057

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of e/m equipment of various tube wells installed at sarai kale khan area under jangpura constituency ac-41. - supply of double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends and welded support l-type ms bracket in both flange with slot of submersible cable.make: tata/ jindal. , supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of weldedconstruction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long). make: granlay / havells./gloster/any djb approved make., supply of nut bolts, washer 1/2 dia 1 long full threaded., supply of rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gl pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gl pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

corporations/Associations/Others

CTN :43123097

23 Dec, 2025 NA

Ernakulam - Kerala

Tender For auction sale of empty paint tin,m s scrap,empty ms barrel,waste carton box,thermocol,waste tarpaulin sheet

Co-operative

CTN :43005067

15 Dec, 2025 3.31 Lacs

Mehsana - Gujarat

Tender For corrigendum : supply of hardware item - 3000608, 59.400, size per roll 200 square feet4*50ft 200 square feet200/10.76 18.53 sqmeter 18.53*5 92.93 m2total- 5 rollmaterial- material ss 304 ss hardware,mosquito net,ss,16 x 26,deepak, 3035709, 59.400, plywood,commercial,is-330,8 x 4ft,19mm 59.46 m2 (20 sheet) our section demandhardwer material required for civil maintenance work for dsd mehsana,all cc,all cfp & psk jagudan., 3039349, 59.400, 12 mm thick commercial plywood total 20 nos sheet, 3039346, 59.400, adhesive,synthetic resin,1kg,fevicol tin-20s h fevicol-20 tin( 1kg pre tin)total 20kgs h fevicol, 3054854, 20.000, hardware latch,ms,12 x 250mm, 3207068, 100.000, chapras - 3 in, 3207066, 100.000, carriage bolt size 4 "use :- aldrop lagava mate carriage bolt, 3035502, 5.000, hardware,nail,with head,17gauge,1in,ms 5ea 5 kgwith head, 3035500, 5.000, 5ea 5 kg, 3035498, 5.000, 1 pac 1 kgtotal -5 kg, 3135344, 40.000, drawer slides 16" channel telescope for furniture total 40 nos pear

Central Government And Public Sector

CTN :43131052

22 Dec, 2025 9.73 Lacs

Delhi - Delhi

Tender For supply of supply, installation, testing and commissioning of horizontal split casing centrifugal pump sets,supplying laying fixing testing and commissioning of 100mm dia.,supplying fixing testing and commissioning of 100 mm dia.,y strainer of ductile ci body flanged ends with stainless steel strainer,balancing valve with built in measuring facility with c i body flanged,measurement testing of earth resistance,supply of 4x4 sq mm size of pvc insulated pvc sheathed copper conductor,supplying and installing of 150 mm width x 50 mm depth x 1.6 mm thickness size,providing and fixing in position industrial type pressure gauges,providing and fixing in position industrial type mercury thermometers,providing and laying in position cement concrete,supplying and fixing of 40 mm x 40 mm x 5 mm size ms angle,providing and fixing of brass ball valve of size 3 4 inchin,providing and fixing following 40 mm cpvc items for making provision,cpvc tee,sit of sheet steel enclosure fully automatic star delta starter suitable,supply and fixing of 24 inch heavy duty exhaust fans suitab

Corporations And Associations And Others

CTN :43132276

17 Dec, 2025 7.14 Lacs

Delhi - Delhi

Tender For supplying of fabricated view cutter made up of ms frame hollow section pipe and covered the frame with ms sheet at different location of c d waste sites under the jurisdiction of division m-iii/central zone.

Corporations And Associations And Others

CTN :43133803

17 Dec, 2025 7.77 Lacs

Delhi - Delhi

Tender For supply of fabricated view cutter made up of ms frame hollow section pipe and covered the frame with ms sheet at different location of c and d waste sites under the jurisdiction of m-i/central zone

Corporations And Associations And Others

CTN :43133805

17 Dec, 2025 7.14 Lacs

Delhi - Delhi

Tender For supply of fabricated view cutter made up of ms frame hollow section pipe and covered the frame with ms sheet at different location of c and d waste sites under the jurisdiction of division m-ii/central zone.

Gc Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors