Get complete information related to latest Gear Fork Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Gear Fork Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Gear Fork Tenders.
Tender For corrigendum : auction sale of rolling stock - condemned bg wag-5ha ac loco no. 23480 with all available ferrous -non ferrous-wooden fittings- excluding the following reclaimable items- (1) wheel set with bull gear(hitachi), msu and wheel disc- 6 sets (2) axle box housing with ferrous components-12 nos. (3) cbc assembly with yoke, draft gear and shank- 2 nos removed items- (1) battery-10 nos (2) line contactor-4 nos (3)loco side buffer-4 nos (4) transformer with conservator-1 no (5) tap changer with smgr-1 no. loco no- 23480 wag-5ha. ds8 no. 022822-25-22474 of 05.02.2026 location- els/ajj cus- sse-els-ajj. pl.no. 98980889. note- (1) rc items to be handed over to custodian at specified location before final delivery.(2) cutting permitted to loadable size only. (3) crane/jcb loading permitted.(4) purchaser should take safety precaution while cutting of loco.(5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by purchaser from railway premises and should be disposed as per the existing norms of central/state government.
Tender For corrigendum : auction sale of depot ferrous scrap - cond. and u/s melting scrap such as cond. end shield, anchors, connecting rod, elbow, fiisher plate, pinion gears, centre pivot, bss hanger, narrow jaw adapter, screw coupling, tie bar, draw bar hook, welding test in full/cut/single/fabricated pieces, push rod, lever, cut parts of cattle guard, end shield, stator w/o coil, knuckle, adapter, axle guide, cut brake beam, brake wheel lever, side pillar, anti falling atd rod, pull rod, shaft, toothed segment, tamping tool, racer,chucks, air brake components, wagon/coach cut up parts, supporting plate, cbc pin,cbc, bogie frame cut ups, sleeves, brake head with/without brake block attachments, adjustable pull rod & safety chain, slack adjuster, crow bar, adapter, angle, channel, plate, rod, different types of cocks, pipe, rings, brake anchor, anchor block, buckle, box, pin, rivet, bolt, back bush, anvil smith, pedal switch & base, stay plate, inner & outer rings of bearing, connecting rod, brake gear components, screw coupling,spring holder plate assembly, crank shaft assembly, cylinder linear centering disc, double hook chain, chain of various sorts and sizes, alternator end shield, modified hanger, weighing machine weights, test bar & hardness table, parking brake link, axle box inner cover, tension rod, tensioning rod gauge plate, pin punches, pinch bar, nut, wide jaw adapter, narrow jaw adapter, top housing, door chainless cotter, cc pad, control rod, fabricated side, cut off angle cock and all released m.s. components of rolling stock/carriage/wagon/loco. all the above items are of all sorts, shapes and sizes in full/broken/cut/dismantled in as is where is condition. pl.no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) during delivery if any major non-ferrous items found the same may be handed over to custodian. 2) cutting permitted for heavy nature items only. 3)loading permitted by crane / jcb. location: bin j
Tender For auction sale of axle arm h (1 2 & 6 complete),axle assy automotive driving rear,coupling driving,crown wheel with drive pinion,gear box transfer box,plate driving assy,rear gear case,shaft control lever governor,twin gear counter shaft,wiper motor (with d/link end)
Tender For auction sale of depot ferrous scrap - m s heavy melting actual lot no. 03122604 0628. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps, packing plates, jacks, mould shoes, liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other miscellaneous items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no.3 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For corrigendum : auction sale of depot ferrous scrap - lot no.y.hf-1.exmp.g-2 04.26.07 description- scrap steel fabrication (heavy) and miscellaneousellaneousllaneous large bulky assembles.tank case holder and similar receptacles .misc items of steel, such as furniture, buckets iron wire utensils tinboard, fire extinguishers without nf etc. our offer: scrap steel fabrication (heavy) bogie frame and fiat bogie frame and miscellaneousellaneousllaneous battery box, bk cylinder, cell container, bolster, various sizes of iron pipes, [coach doors , various sizes of tanks, some quantity of gear case coated with dry foam of oil and grease , steel such as furniture, buckets iron wire utensils tinboard, fire extinguishers without nf etc. our offer- shock observer. and other miscellaneousellaneousllaneoushf-1 items [ as in the lot [loading will be done by purchaser's own arrangement]
Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)cr bcnm1 30019261000 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 2)cr boxnm1 10019600252 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 3)sr boxnm1 10069645319 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)sc boxnr 25099760826 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sc boxnr 25099760284 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)sc boxnm1 10099660733 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 7)cr boxnm1 10019860229 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke vn side only, 4.yoke pin, and 5.side bearer top plate = 7 wagons. ds8 no:023310-25-24115 dt: 27.02.2026. pl.no. 98110159, location: jtj yard. custodian: sse - c and w - jtj. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside.
Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)se boxnr 25079624773 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 2)se boxnr 10079860290 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 3)ecr bcnm1 30109360019 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)se boxnr 25079673702 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)cr bcnm1 30019061037 - rc items:-1..wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, and 3.side bearer top plate, 6)er bobrnm1 72029562036 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 7)er bobrm1 72029578549 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate = 7 wagons. ds8 no:023310-25-24113 dt: 27.02.2026. location: jtj yard. custodian: sse - c and w - jtj. pl.no. 98110159, remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside except for sl no 5) cr bcnm1 30019061037.
Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)sc bcnm1 30099060074 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate , 2)er boxnm1 10029660925 - rc items:-1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, and 3.side bearer top plate, 3)wr boxnr 25089814638 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 4)sc boxnr 10099818172 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sc boxnm1 10099663871 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)cncr bfkn 98259014008 - rc items:-1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, and 3.side bearer top plate, 7)er bobrnm1 72029563613 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate= 7 wagons. ds8 no:023310-25-24108 dt: 27.02.2026. pl.no. 98110159 location: jtj yard. custodian: sse - c and w - jtj. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside except for wagon sl no 2&6.
Tender For auction sale of boggie wheel,boot dms,bty all types,bty scrap,cable all type,case & cradle all size,coat ecc,cover outer (tyre) all type,cover outer (tyre) all type,cylinder all types,e waste computer scrap,e-waste computer scrap,eng assy all type,fire ext all type,fire extingusher,gear box all types,gen set 40 kva,gen set 5 kva,gen set all type,laptop,leather scrap,mattress all types,mfm (container all type),mfm (mixed ferous metal),mfm (mixed ferrous metal)
Tender For auction sale of brake drum,generator engine assy,motors parts,washing machine gear box,all types of filters etc,cond. welding set,engine (tata) etc,engine block with cranck etc,cond. spring leaf etc,all kind of bearing,tyre etc