Get complete information related to latest Gear Machine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Gear Machine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Gear Machine Tenders.
Tender For repair of vehical e e -clutch plate , pressure plate , relaease bearing , fly wheel bearing , auxiliary gear box bush , engine mounting , gear lever balll joint , fly wheel assy skimming and finishing , gear box assy removing the veh, clutch plate pressure plate, release , auxiliary gear box mounting bracket , auxiliary gear box balancing rod , auxiliary gear box transfer case nut bolt , the above parts old removing and new parts full fitting and gear box , auxiliary gear box transfer case mounting bracket , gear box mounting bush , male and female nut bolt , the above parts incl gear box removing and new parts full fitting and gear , veh knuckle assy both side removing the veh and taken to althe machine , both side wheel bobbling veh knuckle assy both side removing , auxiliary gear box balancing rod broken , auxiliary gear box mounting bolt and nut , the above gearbox removing the veh and broken balancing rod and bracket , both side wheel bobbling veh knuckle assy both side removing the veh , gear lever end , fly wheel assy skimming and finishing lathe machine work , auxiliary gear box assy stripping checking and top gar parts remvoing , all parts incl both gear box removing service and all new parts fitting gear box assembled and mounting the veh gear checking road running testing mechanical charges
Tender For auction sale of others - condemned balance brick work and wooden parts of 1] turning and fitting section shed [sl 26], 2] press hammer section shed [sl 25], 3] wagon shop, casnub bogie , sp shop [sl 28] and 4] point and crossing shop [sl 29] of burn standard co limited, howrah. this lot will be sold excluding all types of ferrous and non- ferrous materials , reinforcement released from rcc , chimney, different machines and machine parts of mechanical and electrical department, transformer & other equipment, outside boundary wall, psc sleeper, other p.way items, ms & plastic drums, wooden pattern , etc, total qty- 01 by lot. as per visual estimation , the lot consisting of approximately 2283.64 cum brick works and 9893.12 kg wooden work [this quantity is indicative only, lot will be delivered in by lot basis]. condition-1] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 2] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 3] purchaser should ensure to keep a safety banner around the work spot. 4] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 5] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 6] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 7] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.8] no explosives can be used for demolishing, 9] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use, 10] materials will be sold on "as is where is" basis.
Tender For auction sale of others - condemned civil structure of abandoned 1] bl- 14[oh] , unit-12, location- bwn, 2] pump house for pump no 13, unit-1, location- bwn, and 3] bl- 107 , unit-10, location- traffic colony, bwn, total - 23 unit, total qty- 01 by lot. above mentioned condemned structure are offered excluding common wall of adjacent another unit and boundary wall if any which has not been offered or sold . therefore such type of cases should be dealt with proper care during dismantling so that adjacent unoffered and unsold unit are not damage or broken in any way.condition-1] before bidding purchaser are invariably advised to see the lot and also check whether any unit of the offered lot is occupied in any way. if found occupied , in that case it is required to be brought to the notice of the custodian as well as to this office [ i.e. sr.dmm/hwh ] in writting at least 24 hours prior to the start of auction for taking further necessary action. 2] no complaints/claim by the purchaser will be entertained in this regard after e auction sale is completed. 3] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 4] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 5] purchaser should ensure to keep a safety banner around the work spot. 6] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 7] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 8] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 9] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.10] no explosives can be used for demolishing, 11] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use.
Tender For auction sale of others - condemned civil structure of abandoned 1] qtr no 12 , unit-13, location- mug and 2] qtr no 3 , unit-4, location- bcgm, total - 17 units , total qty- 01 by lot. above mentioned condemned structure are offered excluding common wall of adjacent another unit and boundary wall if any which has not been offered or sold . therefore such type of cases should be dealt with proper care during dismantling so that adjacent unoffered and unsold unit are not damage or broken in any way.condition-1] before bidding purchaser are invariably advised to see the lot and also check whether any unit of the offered lot is occupied in any way. if found occupied , in that case it is required to be brought to the notice of the custodian as well as to this office [ i.e. sr.dmm/hwh ] in writting at least 24 hours prior to the start of auction for taking further necessary action. 2] no complaints/claim by the purchaser will be entertained in this regard after e auction sale is completed. 3] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 4] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 5] purchaser should ensure to keep a safety banner around the work spot. 6] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 7] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 8] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 9] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.10] no explosives can be used for demolishing, 11] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use.
Tender For auction sale of others - condemned civil structure of abandoned 1] qtr no 2 , unit-6, location- nmf and 2] qtr no 9 , unit-1, location- rslr, total - 7 units , total qty- 01 by lot. above mentioned condemned structure are offered excluding common wall of adjacent another unit and boundary wall if any which has not been offered or sold . therefore such type of cases should be dealt with proper care during dismantling so that adjacent unoffered and unsold unit are not damage or broken in any way.condition-1] before bidding purchaser are invariably advised to see the lot and also check whether any unit of the offered lot is occupied in any way. if found occupied , in that case it is required to be brought to the notice of the custodian as well as to this office [ i.e. sr.dmm/hwh ] in writting at least 24 hours prior to the start of auction for taking further necessary action. 2] no complaints/claim by the purchaser will be entertained in this regard after e auction sale is completed. 3] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 4] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 5] purchaser should ensure to keep a safety banner around the work spot. 6] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 7] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 8] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 9] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.10] no explosives can be used for demolishing, 11] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use.
Tender For auction sale of others - condemned structure of abandoned chimney, qty-05 units, total qty- 01 by lot. condition-1] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 2] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 3] purchaser should ensure to keep a safety banner around the work spot. 4] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 5] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 6] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 7] purchaser shall ensure that dismantling work does not affect or endanger safety of life and property in near vicinity.8] no explosives can be used for demolishing, 9] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use, 10] materials will be sold on "as is where is" basis.
Tender For bid to ras supply of repair of vehical c c -gear shaft , gear liver , brake shoe front and rear , gear box repairs service , clutch and brake cable , the above mentioned parts removing and full service gearbox full stripping and service reassembling new parts fitting and vehicle started and running , engine oil leaking engine stripping checking piston rings change bore reboring piston setting , spark plug , wiring kit , chain sprocket kit , clutch brake and km cable , seat cover , above mentioned parts removing and veh service and veh starting and testing , front and rear wheel drum bend removing and spoke adjusting , oil seal kit , cone set , wheel bearing , indicator front and rear , headlight bulb , all above mentioned parts removing and new parts fitting and vehicle full running , front mud guard , chassis welding , side stand , clutch accelerator and kilometre cable , clutch assembly , the all above parts removing and full service reassembling new parts fitting , ignition kew switch , headlight assembly , side cover , seat lock , indicator , fuel guage , dickey lock , full vehicle service and engine gearbox and clutch servicing and testing all parts , the above mentioned parts removing and full service reassembling new parts fitting , gearbox assembly dismantling the vehicle and checking the clutch plate pressure plate , pump assembly and nozzle removing and stripping and checking all parts injector nozzle , hub oil seal leacking removing and new oil seal fitting and leaking checking , the veh full service with water pump belt cabin air filter wiper blade front brake calliper , gear box assembly dismantling the vehicle and clutch plate pressure plate , clutch plate , pressure plate , release bearing , fly wheel assembly lathe work skimming and finishing , auxiliary gear box dismantling the vehicle and taken to the lathe machine shop , the gear box both main and auxiliary mounting the vehicle and full fitting , release baring , front wheel bearing outer , front wheel bearing inner , hub oil seal inner and outer , brake pad set , exel oil seal , back wheel cylinder , clutch cable , spider bearing , oil switch , gear box assembly dismantling the vehicle old clutch plate pressure plate , wheel alignment and balancing , ignition switch , relay 12 and 24 , ignition switch and all relay fitting and full electrical system checking ecu dc , yoke and milling with lathe machine pressing machine welding and finishing welding , universal joint , old yoke and milling universal joint removing the vehicle after lathe work to taken and fitting , wheel bearing front inner , wheel bearing front outer , oil seal front , balancing rod bush big , balancing rod bush small , brake pad , wall door packing with seal , gear box bedding , plug , tie rod end , king pin bush , suspension removing the vehicle and taken to the lathe machine shop old bush , the old parts removing the vehicle and full suspension removing wheel bearing , armature short new fitted , field coil burning new fitted , brush and brush holder burned new fitted , solenoid short and burned , the old parts removing and new parts fitting labour , water pump assy , cabin rod spring assy removing broken spring leaf change and full
Tender For design supply installation testing and commissioning of 02 nos 10 passenger/service gearless machine room elevators in replacement of 02 old freight lifts in student mess at iim lucknow - notice inviting e-tender for design supply installation testing & commissioning of 02 nos. 10 passenger/service gearless machine room elevator in replacement of 02 old freight lifts in student mess, including civil and electrical work at iim, lucknow (the bidder are requested to thoroughly read & understand the tender document, specification etc and site/working condition before quoting the rates)