Latest gear pinion Tenders | Government gear pinion Tenders

CTN :45083164

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047.scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxycut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, gear, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any non ferrous.qty-145mt. location-east of vm road in ncb-12.

Central Government/Public Sector

CTN :45077994

08 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of set of gear and pinion of wap -5 loco gear case consist of (1) gear pinion as per abb drg.no.iao11-00232 rev.1, qty 01 no. (2) intermediate gear as per abb drg. no. iao 11-00231 rev.f, qty-01 no. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45061694

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604009 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , boxnr ,available on rails. 1) special repair boxn m1 10069660152, 2) special repair bcn m1 30069004213 ,3) ser boxnr 25079661945 ,4) cr bcn m1 30019016389 ,5) er bcn m1 30029024992. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support(1stplate),15.safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bcn swing,23.bcnflaps8no:0999603009. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.677.mt (m.s-48.272, ss-4.405) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061692

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604007 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079639360 ,2) ser boxn m1 10079666168 3) special repair boxn m1 10069661050, 4) ser boxn m1 10079561883,5) nr bcn m1 30039062397. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers, 20.knuckle pin.21.knuckle thrower.22.bcn swing, 23.bcnflap ds8no:0999603007. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.174 (ms) .mt sold by number basis only.05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45066212

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132604001 .pl no.98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, bcn m1 , boxn m1 , bobrn m1, boxnr . available on rails. 1) er bcn m1 30029161826. 2) special repair bcn m1 30069062244. 3) ser bcn m1 30079060452 . 4) special repair boxn m1 10069660992 . 5) er bobrn m1 72029660268 . 6) nr boxnr 25039660179 location road no.3 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.distributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors,14.bcn swing,15. bcn flap 16.yoke pin support (1st plate),17. safety plate with anchor plate(2ndplate18.yoke support plate(3rdplate),19.cock of angle cock.20.yoke pin,21)draft gear followers,22.knuckle pin.23.knuckle thrower.24.bronze buishes ds8no:0999603001. dt:.24.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 72.926 .mt (m.s -68.740, ss-4.186) sold by number basis only.06 nos. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 06 nos.

CTN :45058092

11 May, 2026 5.55 Lacs

Imphal - Manipur

Tender For supply of 814 stone crusher akona maint demad d d - aj cw1 510 02 044 jaw plate fixed 10 teeth , aj as 1510 03 050 spring plate , aj as 1510 03 051 coil spring , aj as 1510 03 053 toggle plate , aj as 1510 03 056 swing jaw plate 11 teeth , aj as 1510 03 063 toggle bearing , aj rs 1510 04 070 pedestal brg screen ucp 212 , aj rs 1510 04 073 drive v belt c 150 , aj rs 1510 04 074 fly wheel pully , aj rs 1510 04 075 screen pinion 12 teeth , aj rs 1510 04 076 pinion shaft , aj rs 1510 04 079 pedestal brg drive gear ucp 209 , aj ed 1510 05 080 drive v belt c 215 , aj ed 1510 05 086 engine pully , aj ed 1510 05 089 clutch shaft , aj ed 1510 05 092 bearing outer clutch shaft 63102rsr l140 , aj ed 1510 05 093 bearing inner clutch shaft 6204 , aj ed 1510 05 129 pressure plate , aj ed 1510 05 130 clutch plate , aj ed 1510 05 132 oil seal 60 x 110 x 13 , aj mf 1510 07 110 bracket cover bolt with nut m16x50 , aj mf 1510 07 112 toggle block bolt with nut m24x300 , aj mf 1510 07 113 veg block bolt with nut m40x550 , aj mf 1510 07 115 swing jaw plate bolt with nut m20x460 , aj mf 1510 07 127 screen bearing bolt with nut m16x60 , nk jaw plate fixed 13 teeth , nk jaw plate moveable 12 teeth ) /bid number : gem/2026/b/7477539 * /dated: 30-04-2026 & & / bid document 1 / 23

corporations/Associations/Others

CTN :44713561

08 May, 2026 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : supply of fasteners suitable for tata hitachi ex200 model backhoes d d - sm442140083 f.d. cover mounting bolts with spring washer , sm442130287 swing gear box mounting bolts , sm442130118 swing circle mounting bolts , sm442140082 upper roller mounting bolts with nuts and spring washer in assembled condition , sm442140033 centre joint mounting bolts , sm442130007 bottom roller mounting bolts , sm442130289 ring gear mounting bolts with spring washer , sm442140086 sprocket mounting bolts with spring washer , sm442130288 side cutter bolts with nuts and flat washer in assembled condition , sm442140085 track motor mounting bolt with spring washer , sm442120013 engine mounting bolts with flat washer and 2 nuts in assembled condition , sm442120012 engine mounting bolts with flat washer and 2 nuts in assembled condition , sm442120014 diesel overflow line mounting bolts , sm442130284 bucket pin lock bolts with nuts and spring washer in assembled condition , sm442140084 track motor brake valve mounting bolts with spring washer , sm442140040 koudi washer , sm442130285 teeth lock bolt with nuts and flat washer in assembled condition , sm442130286 center joint lock plate bolt with spring washer

Central Government/Public Sector

CTN :45050564

05 May, 2026 NA

Erode - Tamil Nadu

Tender For supply of lantern gear pinion for n32 tap changer for conventional locos. as per rdso specn. no.:elrs/epec/gr/0039 (rev.-2), to m/s. repl part no s1470 and drg no ag-416040-r1 or m/s. ae part no g-470 and to drg no 9980383508801 [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45012573

12 May, 2026 19.50 Lacs

Multi City - Multi State

Tender For supply of spur gear for pump hc 1150 svnl voith , spur gear primary shaft hc 1150 svnl voi , 010404 flat sealing ring 1150 svnl voith , fusible plug m 24x1.5x18 hc voith , o ring 217x5 b hc voith , o ring 260x5 b hc voith , v ring hc 1150 svnl voith , shaft seal ring 824 n 70x105x13 , drive pinion hc 1150 svnl voith , gear pinion hc 1150 svnl voith , fluid level indicator hc 1150 svnl voith , o-ring 44.2x2.5b 2 hc voith

Central Government And Public Sector

CTN :44996152

16 May, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of valves for swro plant d d - 12 - inch 300 nb rubber lined butterfly valve is13095 wafer type manual gear box hand wheel type pn-10 class - 150 as per annexure - 1 , 10 - inch 250 nb rubber lined butterfly valve is13095 wafer type manual gear box hand wheel type pn-10 class - 150 as per annexure - 1 , 8 - inch 200 nb rubber lined butterfly valve is13095 wafer type manual gear box hand wheel type pn-10 class - 150 as per annexure - 1 , 6 - inch 150 nb rubber lined butterfly valve is13095 wafer type manual gear box hand wheel type pn- 10 class - 150 as per annexure - 1 , 5 - inch 125 nb rubber lined butterfly valve is13095 wafer type manual gear box hand wheel type pn-10 class - 150 as per annexure - 1 , 8 - inch 200 nb rubber lined butterfly valve is13095 with flange manual gear box hand wheel type pn-10 class - 150 as per annexure - 1 , 6 - inch 150 nb rubber lined butterfly valve is13095 with flang manual gear box hand wheel type pn-10 class - 150 as per annexure - 1 , 8 - inch 200 nb gate valve is 14846 with flange non-rising stem hand wheel type pn-10 class - 150 as per annexure - 1 , 6 - inch 150 nb gate valve is 14846 with flange non-rising stem hand wheel type pn-10 class - 150 as per annexure - 1 , 8 - inch 200 nb dual plate wafer type check valve api 594 pn-10 class - 150 as per annexure - 1 , 6 - inch 150 nb dual plate wafer type check valve api 594 pn-10 class - 150 as per annexure - 1 , 8 - inch 200 nb swing check valve is 5312 pn-10 class - 150 as per annexure - 1 , 6 - inch 150 nb swing check valve is 5312 pn-10 class - 150 as per annexure - 1 , 6 - inch 150 nb diaphragm valve is11791- 1986 pn-10 class - 150 as per annexure - 1 , 3 - inch 80 nb diaphragm valve is11791-1986 pn-10 class - 150 as per annexure - 1 , 2.5 - inch 50 nb diaphragm valve is11791- 1986 pn-10 class - 150 as per annexure - 1 12 - inch (300 nb) rubber lined butterfly valve (bis13095) ) /bid number : gem/2026/b/7321647 * /dated: 25-04-2026 & & / bid document 1 / 32

Gear Pinion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors