Latest gear rim Tenders | Government gear rim Tenders

CTN :44693212

07 Apr, 2026 27.92 Lacs

Solapur - Maharashtra

Tender For repairs and maintenence to cr gate radial type of size 5.5 m x 3.5 m with 10 ton capacity hoist assembly -3 nos at rd 86/720 of ujani left bank canal - name of work -repairs and maintenence to cr gate radial type of size 5.5 m x 3.5 m with 10 toncapacity hoist assembly -3 nos at rd 86/720 of ujani left bank canal by way ofinspecting, dismentaling damaged and broken wire rope and replacement with new one, replacement of damaged rubber seal with new one, repairs and maintenance to skin plate and hoist platform by removing old paint with wire brush and painting with anticorrosive coal tar epoxy paint. applying cardium compound to newly fixed wire ropes, replacement of forged wire rope socket wth new one. servicing to reduction gear box and applying mp grease to the gears and pinions and repairsto motorisation to c.r.gate h.o. hoist 10 mt.cap. with complete maintenance which includes material, labour, workshop, sundry and handling charges, taxes, levis, transportation etc. all complete job

CTN :44693225

07 Apr, 2026 23.89 Lacs

Solapur - Maharashtra

Tender For repairs and maintenance to cr gate radial type of size 5.5 m x 3.5 m with 10 ton capacity hoist assembly -3 nos at ch. no. 19/760 of ujjani left bank canal by way - name of work -repairs and mainteneance to cr gate radial type of size 5.5 m x 3.5 m with 10 toncapacity hoist assembly -3 nos at ch. no. 19/760 of ujjani left bank canal by way of inspecting, dismantaling damaged and broken wire rope and replacement with new one, replacement of damaged rubber seal with new one, repairs and maintenance to skin plate and hoist platform by removing old paint with wire brush and painting with anticorrosive coal tar epoxy paint. applying cardium compound to newly fixed wire ropes, replacement of forged wire rope socket with new one. servicing to reduction gear box and applying mp grease to the gears and pinions and provid ing new cabin to c.r.gate hoist 10 mt.cap. with complete maintenance. which iincludes material, labour, workshop, sundry charges, handling charges, taxes, transportation etc. all complete job.

CTN :44693277

09 Apr, 2026 1.37 Crore

Pune - Maharashtra

Tender For repair, reconditioning and maintenance of 12 x 8 m 5 nos radial gate, rg hoist 42 ton cap5 nos. by replacing old wornout both side and bottom replacing old wornout dial indicatorassembly ne, carring out work at dimbhe project. - repair, reconditioning and maintenance of 12 x 8 m - 5 nos radialgate, rg hoist 42 ton cap. - 5 nos. by replacing old wornout bothside and bottom rubber seal, replacing old wornout dial indicatorassembly new one, carring out welding work at downsteamside of skin plate, replacing of hyd. brake assembly with newem brake assembly, removing and grinding of spatter andwelding spot and cleaning to wall plate, sill plate to minimisefriction with rubber seal, servicing to guide roller, removingcover from trunion girder box, cleaning and painting insidetrunion girder box, replacing broken flange coupling, repairand reconditioning of 42 ton cap. hoist gear train by replacingwornout bearings, removing dry and old grease from gear andpinion by applying new, repair and strengthening of ladders from deck bridge top to hoist bridge and extended platform ofby welding replacing wornout chequrred plate from hoist bridgeand poeg cabin and platform, repair and maintenance of poeggate size 2.50 x 4.68 mtr. - 1 no. and its hoist 45 ton cap byreplacing wornout bearings, rubberseal and replacing em brakecomplete work with sand blasting, surface preparation applyingred oxide paint and coal tar paint and flat oil paint as perstandard practice with test and trial at dimbhe dam project.

Central Government/Public Sector

CTN :44667703

10 Apr, 2026 NA

Mumbai - Maharashtra

Tender For procurement of of spares of patriot make crane for mh asset - seal oil sl, o ring, o ring, o ring, seal oil sl, o ring, o ring, o ring, o ring back up, o ring, o ring back up, o ring, hose assembly, hose assembly, hose assembly, main aux hydraulic pump, boom pump, swing pump, anti 2 block system (for main & aux)-hyd, fleeting sheave, slew system high pr.filter, slew pump, bushing- lever housing, lever arm-dog, retaining plate, brake band assembly, sheave for pendant block boom hoist, pin sheave 31/2" dia 24" long for pendan, actuator stub plate, pin sheave 31/2" dia for main frame, nyloc washer 4" od, nyloc washer 4" od 31/2"id and 1/8" thic, kit directional control valve, main/ aux hydraulic pump, boom hoist & swing pump(a tandem unit), check valve, gear coupling ( pump drive adapter), regulator valve, hydraulic oil cooler, repair kit of 4 way 3 position tandem, repair kit of rp70 pilot operated relief, repair kit of 4 way 3 position tandem, repair kit of 4 way 3 position tandem, joystick valves, hydraulic valves, pilot dump valve, counter balance valve, pressure reducing valve, radiator, engine, hydraulic tank breather, kit suction filter assembly, bushing lever housing, lever brake band, retaining plate, suction filter, hydraulic oil filter, air intake filter, valve main, valve swing, air filter, pilot valve, joystick valves, winch motor, winch motor, engine oil pressure gauge, 2 pos/ 2 way valve, shuttle valve, gauge, kit , return filter assembly, hydraulic oil pressure guage, drive pinion, swing gear box, hydraulic swing motor, hydraulic swing brake, triple section hydraulic pump, boom hoist winch-include luffing pawl), friction plates for boom winch brake, brake discs, u-cup seal, piston back up ring, brake spring, o-ring, back up washer, o-ring, slew hyd.pre.gauge, o-ring/seal kit, o-ring/seal kit, o ring / seal kit, o ring / seal kit, engine foot throttle, gauge, pilot pressure, hoist selector valve, joy stick pressure gauge, slew hyd. pr. gauge, hand pump, air pressure gauge, eng start valve, engine shutdown valve, foot valve, radiator, cable emergency stop, return filter assembly, kit, suction filter assembly, kit, diesel and hydraulic oil tank gasket, air pressure gauge, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine oil pressure gauge, engine stop cable, water temp.gauge, magnetic pick up, joy stick, main/ auxiliary, joy stick , boom / slew, clamps for main,aux.& boom wire rope, swing brake, limit switch assembly, wiper motor with arm, blade and switch, anti 2 block system ( main & aux. hoist, compressor safety valve, drain valve, horn switch - push type, selector valve, pilot pressure valve, kit hydraulic directional valve, pilot pressure valve, gauge,hyd control - pressure., hydraulic oil cooler, return filter assembly, kit, suction filter assembly, kit, swing gear box, swing drive pinion, swing brake, joy stick, main/ auxiliary, joy stick , boom / slew, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine stop cable

CTN :44670415

06 Apr, 2026 15.80 Lacs

Pune - Maharashtra

Tender For repairs and maintenance to cr gate at km. 161/600 and km 172/360 5.5 m x 3.5 m - qty. 2 nos. on new mutha canal for indapur irrigation sub division, indapur by way of inspecting, dismentaling damaged and broken wire rope and - name of work-repairs and maintenance to cr gate at km. 161/600 and km 172/360 5.5 m x 3.5 m qty. 2 nos. on new mutha canal for indapur irrigation sub division, indapur by wayof inspecting, dismentaling damaged and broken wire rope and replacement with new one, replacement of damaged rubber seal with new one, repairs and mainte nance to skin plate and hoist platform by removing old paint with wire brush and painting with anticorrosive coal tar epoxy paint. applying cardium compound to newly fixed wire ropes, replacement of forged wire rope socket with new one. servic ing to reduction gear box and applying mp grease to the gears and pinions andrepairs to motorisation to c. r. gate h. o. hoist 10 mt.cap. with complete mainte nance which includes material, labour, workshop, sundry, handling and transportation charges, taxes, levis etc. all complete job

Central Government/Public Sector

CTN :44700679

13 Apr, 2026 2.00 Lacs

Sidhi - Madhya Pradesh

Tender For replacement of bull gear / main gear wheel of hoist drive of 24/96 krishna dragline at nigahi project.

corporations/Associations/Others

CTN :44254555

10 Apr, 2026 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : supply of cs010100170-180 kw hoist winch gear box for bucket wheel boom as per drg no: sme-4994 for bwe 1420-2

CTN :44674032

10 Apr, 2026 52.22 Lacs

Ahmedabad - Gujarat

Tender For fabrication, manufacturing, supplying and erection work of new chequered plate on hoist platform by dismantling old rusted chequered plate, providing and fitting of new `z` type side rubber seal and flat type bottom rubber seal by dismantling old, providing and fitting of new 2 -no`s entrance steel gates at the both side end of spillway bridge, providing and fitting of tyre coupling between forward- revers gear box and diesel engine of d.h unit in c d unit and other mis. work for radial gate size 41`x27`- 8 no`s of rana khirasara reservoir scheme. (dist. porbandar.)

Central Government/Public Sector

CTN :44456607

31 Mar, 2026 45.69 Lacs

Sidhi - Madhya Pradesh

Tender For corrigendum : replacement of swing rack segments assembly and dismantling , refitment of bearing stands, rope drums and complete hoist and drag gear box esh 20/90 matang dragline at nigahi project.

Central Government And Public Sector

CTN :44661602

14 Apr, 2026 NA

Multi City - Multi State

Tender For wire rope hoist of 2t capacity confirming to is-807,3938 with hoist carrier for ct movement to suit 140 mm rail width as per the follwing specification:equipment: electric wire rope hoist, capacity : 2000 kgs, duty & class: class iv heavy duty (m8), height of lift : 8.0mtrs, rail size : 140mm width, 400 mm height, hoist head room : 1100 mm, hoist speed : 4 to 5 mpm, ct speed : 12 to 15 mpm, hoist motor hp : 5 hp, sq. cage motor, ct motor hp : 0.5 hp, sq. cagemotor, hoist brake: dc/ac disc brake of unitorq 150% torque of motor, ct brake : em brake/pethe, hoist & ct gearbox : helical/spur gear combination. all gears inside the gearbox shallbe of en-24 material with hardness of 40-45 hrc, wire rope : dia 8 mm, 4 falls, 6 x 36 construction steelcore, rope drum : seam less pipe of suitable dia & shell thickness to accommodatewire rope single layer as per is-2062, hook : forged heavy duty single shank type plain hook as per is-3815, 360 swivel type with spring loaded safety latch, control panel : consists of mcb, olar, fuse, etc , operations : pendant operated (floor level) note: a) make of motors: kirloskar/siemens/abb/ge/alsthom, b) make of bearings: skf/ntn/fag/timken, c) electricals: siemens/ge/alsthom/l & t/abb, d) control voltage: 110v, e) supply voltage: 400/440v, 3 phase 50 cycles, f) guarantee: 12 months from the date of commissioning or 18 months from the date of supply, whichever is earlier. [ warranty period: 18 months after the date of delivery ]

Gear Rim Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector