Latest gelcoat Tenders | Government gelcoat Tenders

Central Government/Public Sector

CTN :45026965

03 Aug, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of enamel synthetic, exterior, finishing, black. specification:- is 8662:2024 (third revision) along with rdso amendment no.1a (rev.1.0) as an additional requirement. special terms & conditions:- (i) material shall be packed in 20 ltrs. metal containers conforming to is:2552/1989_amend.1 (third revision) (reaffirmed 2018) grade b-1. (ii)the goods should be dispatched within 02 months from the date of manufacturing and firm will give an undertaking that the material supplied is not more than60 days old. (iii) suppliers have to write on the container batch no., date, month, year of manufacturing and also write the paint can be used before 12 months from the date of manufacturing. (iv) keeping properties- not less than one year. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45425159

14 Jun, 2026 50.00 Lacs

Baran - Rajasthan

Tender For all kind civil construction goods supply for gram panchayat all scheme for fy 2026-27- peamet p.p.c. , so/gravel , gravel local/local , 40mm grit of stone (broken from crusher) (yoids kart 1/11) , 20mm grit of stone (crusher broken) , stone 12/10/6mm grit (crusher broken) , gravel (yoids cut 1/6) , brick (22.5 x 11 x 7.50 cm) i st class , masonry berda stone (rr) , ditch soling stone (23cm height for road/ditch work) , sedstone (dpc, sill, coping, lintel, tand, almirha etc) 25-40mm thick , unpolished rough cotta stone up to 900 sq. cm , polish kota stone (one side polished) up to 900 sq. cm , cement interlocking block m-30grade, 60mm thick , cernent interlocking block m-30grade, 80mm thick , iron (for tor steel fe 415/500 reinforcement) , widing wire 18 gauge , konia iron/chocor rebar/leaf/ angle iron , enamel paint , distemper (water bound) , g.i. blanket 22 gauge (0.80 mm) , r.c.c. np3 tum pipe fear collar 1000mm dia , r.c.c. np3 tum pipe with collar 600mm dia , p.v.c. passenger tank with cover ((conforming to is:12701-1989) , class i (fly ash brick , other building materials

Central Government/Public Sector

CTN :45338576

12 Jun, 2026 NA

Yamunanagar - Haryana

Tender For supply of enamel synthetic, exterior, undercoating, to ral ds 0708040. specification:- is 8662:2024 (third revision), along with rdso amendment no. 1a (rev.1.0) as an additional requirement. special terms & conditions:- (i) material shall be packed in 20 ltrs. metal containers conforming to is:2552/1989_amend.1 (third revision) (reaffirmed 2018) grade b-1. (ii) the goods should be dispatched within 2 months from the date of manufacturing and firm will give an undertaking that the material supplied is not more than 60 days old. (iii) suppliers have to write on the container batch no., date, month,year of manufacturing and also write the paint can be used before 12 months from the date of manufacturing. (iv) keeping properties - not less than one year. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45354346

18 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of establishment of watermanship training centre including electrrical engineer equipment - 1.1. modular construction, easy/ fast installation/ anti-skid surface/ uv protected/ more stable/ excellent buoyancy. 1.2. dimensions-8ft x 6.5ft x 1.5ft (length x width x height). 1.3. buoyancy-1000 kg. 1.4. railings- ms railings epoxy coated with nut and bolts. 2.1 hand held fire extinguisher (2 nos). 2.2. obm 90 hp suzuki outboard motor with accessories (fuel tank, steering remote system propeller, toolkit) & manufacture recommended list of spares (mrls). 3.1. dimensions-4.7m x 2.1m x 0.50m (length x width x buoyancy dia), 05 x chambers and 08 x person capacity. 3.2. hull construction fiberglass, u.v. resistance gelcoat, epoxy resin with vacuum infusion system and sandwich core material. 3.3. engine-90hp 4 stroke remote control engine with steering system. 3.4. accessories - pair of oars, foot pump (electric & manual), repair kit. 4.1. open covered mechanical storage shed (30 ft x 40 ft x 15ft). 4.2. profile sheet 40x30, iron pipe 3x3 inch, parlin 2x2 inch, brick wall 100ftx36inch and 08 x tube light. 5.1. rcc ramp 4m wide x 12m long, rcc pilar 12x12 inch, steell rat 18mm and 12mm. 5.2. reinforced concrete (m25) with non-slip finish. 5.3. ramp rcc thickness 6 inch

Central Government/Public Sector

CTN :45026147

01 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of synthetic enamel, interior, finishing, smoke grey for the system of interior painting of coaches. specification:- is 133:2023(sixth revision) including optional requirements mentioned in table 2 & 3 of is 133:2023(sixth revision), isc:692 with rdso amendment no.1a(rev.1.0) as an additional requirement. special terms & conditions:- (i) material shall be packed in 20 ltrs. metal containers conforming to is:2552/1989 amend.1 (third revision)(reaffirmed2018) grade b-1. (ii) the goods should be dispatched within 02 months from the date of manufacturing and firm will give an undertaking thatthe material supplied is not more than 60 days old. (iii) suppliers have to write on the container batch no., date, month, year of manufacturing and also write the paint can be used before 12 months from the date of manufacturing. (iv) keeping properties - not less than one year from the date of manufacturing. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45257425

03 Jun, 2026 NA

Jamnagar - Gujarat

Tender For annual work of supplying goods and materials for various branches in sikka municipality office. - hand broken stone aggregate 25mm size to 90mm size , hand broken stone aggregate 40mm size to 63mm size. , crushed stone aggregate 40mm to 63mm size , crushed stone aggregate 40mm size , crushed stone aggregate 6mm to 10mm size , crushed stone aggregates 20mm siz , crushed stone aggregates 10mm size , earth , moorum , aluminium paint , anodised aluminium butt hinges 75 mm x 63 mm x 3.2mm , anodised aluminium butt hinges 50 mm x 45 mm x 3.2mm , anodised aluminium screw 40mm , anodised aluminium screw 30mm , anodised aluminium screw 20mm , angle size 15 x 15 cm. (glazed) , anticorrosive bituminous paint (black) , asbestos rope , black japan paint , bitumen washer , battens 50mmx25mm , battens 50mmx50mm , battens 75mmx50mm , battens 75mm x100mm. , billimora bricks , bat clamps 80 mm dia , bevelled edge mirror 600mm x 450mm , blasting powder , binding wire , black stone for cooking platform , bolts 12 mm dia 10 cm. long , brass screw down bib type. 15mm dia. , steel hysd , brass screw down bib type. 20mm dia , c.i. grating 100x100 mm , brick aggregate 40mm size , cast iron cover , c.i. cover with frame 500mm x 700mm inside , c.i. cover without frame 300mm x 300mm inside , c.i. cap gril as per std. design , c.i. cover with frame 455mm x 610mm inside , c.i. cover with frame 600mm x 850mm inside , brass screw down stop cock 15 mm dia , brass screw down stop cock 20 mm dia , brass screw down stop cock 25 mm dia , c.i. cover with frame 455mm x 610mm , 12.5 litre high level c.i. flushing cistem with fittings , brick aggregate (single size):40 mm nominal size , cast iron spigot and socket soil pipe 100mm , cast iron spigot and socket soil pipe 75mm , c.i. ring painted with coal tar , c.i. or m.s brackets , c.p. brass screws & washers 25 mm size , c.p. brass 1/2 turn flush cock 20 mm dia , c.p. brass 1/2 turn flush cock 25 mm dia , c.p. brass 1/2 turn flush cock 32 mm dia , portland cement , common burnt clay bricks conventional size , cold twisted bars , coarse sand , common burnt clay modular bricks class designation 12.5 , stone aggregate(single size):40 mm to 63 mm nominal size , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 10 mm to 20 mm nominal size , stone aggregate(single size): 10 mm nominal size , stone aggregate(single size): 06 mm to 10 mm nominal size , distemper primer , devdar wood and planks , dark shade pigment , copper metal ball cock 25mm dia , copper metal ball cock 50mm dia , dry distemper , enamel paint , flat back wash basin 550mm x 400mm size , fibre base bitumen saturated under layer type-l , fibre base self finished felt type-ll. grade , fine sand , galvanised steel plain sheets , galvanised steel j or l hooks 8 mm dia , g.i. plain washer , flat back wash basin white vitrious china 450mm x 300mm size , flat back wash basin white vitrious china 550mm x 400mm , fly ash bricks , providing and laying g.i sheet 0.8mm thick corrugated , g.i. j or l hooks , g.i.barbed wire , fuel steam coal , g.i. pipe 30 cm long 50 mm dia , galvanized m s tubes (medium grade) 25 mm dia. , galvanized m s tubes (medium grade) 15 mm dia , glass 2 mm to 3 mm thick , 150 mm internal dia. half-round s.w.chenel 60 cm long , galvanised mild steel tube medium grade 20mm dia , galvanised mild steel tube medium grade 32mm dia , galvanised mild steel tube medium grade 40mm dia , galvanised mild steel tube medium grade 50mm dia , galvanised mild steel tube medium grade 65mm dia , galvanised mild steel tube medium grade 80mm dia , gauge plate , glass shelf with c.p. guard rail and brackets 600mm x 120mm , gun metal screw down bib tap-15 mm dia , gun metal screw down bib tap-20 mm dia , gun metal screw down bib tap 15 mm dia. , gun metal check or no return fullway wheel valve 25 mm. dia , gun metal wheel valve 15mm dia , gun metal wheel valve 20mm dia , gun metal wh

CTN :45234667

24 May, 2026 5.00 Lacs

Bhilwara - Rajasthan

Tender For painting material supply work in msrgy - primer color , oil paints, , plastic paint, , putty, , brush 04", , brush 05", , brush 06", , turpentine, , sand goods, , putty blade, , waterproof cement paint, , synthetic enamel paint (black and chocolate shades), , synthetic enamel paints (except black and chocolate shades), , brush roller - 04", , brush roller - 05", , brush roller - 06", , red oxide (asian/breger), , iron oxide color, , wire brush, , shoe brush, , sand paper

State Government

CTN :45159732

29 May, 2026 NA

Shillong - Meghalaya

Tender For quotations - goods for procurement of equipment s for plant health clinic under cdp - trinocular microscope, soil testing device, pusa stfr meter kit, weighing balance, portable petrol generator, electric mini grinder, insect storing vials, dissecting needles, utility tray (plastic), utility tray (enamel coated), carboy with stopcock, magnifying glass, forceps, wash bottle (6 pcs), camel brush (5 pcs), gloves - small, gloves - medium, gloves - large, sieve (2mm), spatula, beakers (100 ml), conical flasks, measuring cylinder - 10 ml, measuring cylinder - 50 ml, measuring cylinder - 100 ml, measuring cylinder - 500 ml, glass rod, microscopic glass slides, microscopic cover slips, serological disposable pipettes, funnel, whatman filter paper no. 1, gram staining kit, lactophenol cotton blue, immersion oil, ethanol absolute, foldable chairs, foldable tables, steel office almirah, steel shelves slotted angle rack, hand wash sink with stand, storage box with lid, mobile phone sg, laptop, printer

Central Government/Public Sector

CTN :45166754

18 May, 2026 NA

Yamunanagar - Haryana

Tender For supply of synthetic enamel, interior, undercoating, white for the system of interior painting of coaches. specification:- is 133:2023(sixth revision) including optional requirements mentioned in table 2& 3 of is 133:2023(sixth revision) with rdso amendment no.1a (rev.1.0) as an additional requirement. special terms & conditions:- i - material shall be packed in 20 ltrs. metal containers conforming to is:2552/1989_amend.1 (third revision) (reaffirmed 2018) grade b- 1. ii - the goods should be dispatched within 02 months from the date of manufacturing and firm will give an undertaking that the material supplied is not more than 60 days old . iii - suppliers have to write on the container batch no., date, month, year of manufacturing and also write the paint can be used before 12 months from the date of manufacturing. iv - keeping properties - not less than one year from the date of manufacturing. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

Gelcoat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors