Get complete information related to latest Generator Hiring Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Generator Hiring Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Generator Hiring Tenders.
Tender For corrigendum : supply, fitting & commissioning of spare parts in diesel generator set (capacity-7.5kva) of tower wagon no.-ptl-068. (01 set consisting of 10 spare items and lathe work & labor charge). detail list of spares attached in annexure-a. [ warranty period: 30 months after the date of delivery ]
Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tenderer’s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tenderer’s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge
Tender For corrigendum : tender for supply of generator spare e e -gth100s brg oil gaurd brg sealing st , gth100s insulating washer epoxy 18 25x3 , sos gth100 seal spring wg4 322008r0001 , gth100s seal bearing spring , gth100s brushgear insultn sleeve17 22x43 , cord neoprene 50 59 sq 8 mm
Tender For supply of two 10 kva generator set and its spare part items as per ts d d - 10 kva 8 kw 50 hz frequency cpcb iv plus silent enginre driven genr set liquid cooled three phases ac conf to is 10002 crdi system , on load change over switch metal encl 415 volt 50 hz ac 4 pole 63 amp capacity , xlpe insulated pvc tape inner electric cable conf to is 7098 4 core 1100 volt , electric earthing set , fuel filter element primary , fuel filter element secondary , fuel flexible pipe , hose pipe , engine oil , oil filters , fan belt , fuses , screw driver set , d spanners 6mm to 27mm
Tender For tender for supply of spare parts of generator circuit breaker ge make - as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet , as per attached specification sheet
Tender For supply of two 10 kva generator set with spare parts c c - 10 kva 8 kw 50 hz frequency cpcb iv plus silent enginre driven genr set liquid cooled three phases ac conf to is 10002 crdi system , on load change over switch metal encl 415 volt 50 hz ac 4 pole 63 amp capacity , xlpe insulated pvc tape inner electric cable conf to is 7098 4 core 1100 volt , electric earthing set , fuel filter element primary , fuel filter element secondary , fuel flexible pipe , hose pipe , engine oil , oil filters , fan belt , fuses , screw driver set , d spanners 6mm to 27mm
Tender For providing of repair and overhauling service - diesel generators- diesel generator sets; mandatory spare parts of diesel generator set 750kva; yes; buyer premises
Tender For corrigendum : tender for the supply of various equipments required for upgradation of district food laborartory, karnal - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles", karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard", refrigerated centrifuge (bench top),, bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples.", gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25µm (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25µm),", "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 µl recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water.", ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubing’s, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 µl, 20 µl, 50 µl, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each ofc8 = 250 × 4.6 × 5μm c18 = 250 × 4.6 × 5μmcyano = 250 × 4.6 ×5μm. amino = 250 × 4.6 × 5μmphenyl = 250 × 4.6 ×5μm. silica = 250 × 4.6 × 5μm.all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate.", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate.", ft-ir with atr & liquid cell, "• hydraulic press with kbr die and pellet holder• suitable mortar pestle (dia 5-6 cm)• suitable portable de humidifier to maintain 30- 60% rh• temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab.• ref
Tender For supply of 250kva and 500kva dg set : : - supply of 500 kva diesel generator along with all associated accessories for raipur , installation and commissioning of supplied new dg set including dismantling of existing dg set , supply of 250 kva diesel generator along with all associated accessories at bhadrawati , spare as per annexure -i sl no 01-16 , supply of 250 kva diesel generator along with all associated accessories at allahabad , supply of 250 kva diesel generator along with all associated accessories at shillong