Latest generator rotor Tenders | Government generator rotor Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

State Government

CTN :45541830

26 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For design, supply, installation, testing and commissioning of hybrid run (grid - solar) single stage/ multi stage split case/centrifugal pump coupled with squirrel cage induction motor with hybrid motor starter, spv panels and rising main and its allied

Central Government/Public Sector

CTN :45549350

01 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For design, manufacturing, supply, installation and commissioning of dyno drive for testing of ac coach with 25kw alternator at pit line applicationand 75kw/100hp squirrel cage motor with 6 grooved pulleys shaft and channel set with civil work as per rdso specification. no.rdso/pe/spec/ac/0081-2007rev.0 amendment no.1 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45545615

23 Jun, 2026 NA

Shakti - Chhattisgarh

Tender For supply & testing of bee 3 star and above rating isi marked energy saver vertical open well submersible motor pump set 7.5 hp/2 stage ,head range 30 mtr at discharge 10 lps , delivery size outlet 65mm confirm to is no- 14220 and 1994 make:- 1.-amrut ,,lubi,flotech,ksb , shakti or equivalent. note:- authorization certificate & oem/challan/innvoice with one year warranty on paper at the time of delivery. material is required in company original packing & proof required along with supply material procured from oem. [ warranty period: 12 months after the date of delivery ] ]

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

CTN :45520010

29 Jun, 2026 37.98 Lacs

Gandhinagar - Gujarat

Tender For supply, installation, testing & commissioning of 700 kw, 989 rpm, 6.6 kv ht 3-phase induction motor compatible to existing base frame of wilo make hscf pump installation with suitable coupling & other required accessories including insurance, transportation, loading, unloading, inspection charges etc. complete for nc-6, khirai pumping station, tal-maliya, dist-morbi

CTN :45096857

18 Jun, 2026 9.86 Lacs

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of 100 hp vertical hollow shaft 3 phase, 980 rpm induction motor for 20 cusec vt pump and allied works at li/dws takanwari old.

State Government

CTN :45270268

22 Jun, 2026 26.55 Lacs

Thrissur - Kerala

Tender For corrigendum : manufacture, supply, erection, testing and commissioning of automatic self-cleaning type duplex filter with gear box, motor and brush cleaning, differential pressure switch and auto drain arrangements and with control panel at 3x18 mw sholayar pow

State Government

CTN :45533296

18 Jun, 2026 1.69 Lacs

Panchkula - Haryana

Tender For supplying erection testing and commissioning of submersible motor 35 bhp and submersible cable 16 sqmm at twell no. m 5 in sector 7 panchkula

State Government

CTN :45534952

24 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For design, supply, installation, testing and commissioning of hybrid run (grid- solar) multi stage split case/centrifugal pump coupled to 3-phase squirrel cage induction motor along with hybrid controller, spv panels and raising main and its allied acc

Generator Rotor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government