Latest ghat development Tenders | Government ghat development Tenders

Central Government And Public Sector

CTN :44760622

24 Apr, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

CTN :44771537

14 Apr, 2026 13.76 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing kota stone flooring at ground floor in govt. model senior secondary school sector 10 a chandigarh (block c)

CTN :44759710

16 Apr, 2026 43.30 Lacs

Chatra - Jharkhand

Tender For providing and fixing rcc hume pipes across haul roads at locations where drainage is required and garland cleaning around ob dump area and filling of potholes , ditches of roads with stone dust and metal from police picket to weigh bridge no 15 under

CTN :43994967

15 Apr, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and pl

Central Government/Public Sector

CTN :44751015

24 Apr, 2026 45.84 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of earth work in excavation , filling available excavated earth excluding rock , demolishing rcc work , providing and laying in position cement concrete , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand under floors , steel reinforcement for rcc work , centering and shuttering including strutting lif in foundations footings bases of columns , centering and shuttering including strutting lif columns pillars piers abutments posts and struts , dry stone pitching 22 point 5 cm thick , neat cement punning , demolishing brick work , brick work with non modular fly ash bricks , finishing walls with textured exterior paint , finishing walls with 100 percentage premium acrylic emulsion paint , 15 mm cement plaster , random rubble masonry with hard stone , structural steel work riveted bolted or welded in built up , surface dressing of the ground including removing vegetation , removing white or colour wash by scrapping , providing and fixing glass panes with putty and glazing clips in steel doors , providing and fixing glazing in aluminium door window ventilator shutters , providing and fixing aluminium work for doors windows ventilators , providing and fixing gi chain link fabric fencing , providing and fixing ist quality ceramic glazed wall floor tiles , grading roof for water proofing treatment with cement concrete , repair to plaster of thickness 12mm to 20 mm in patche , providing and laying water proofing treatment on roofs of slabs , 0 mm thick factory made polyvinyl chloride pvc door shutter , providing and fixing factory made panel pvc door shutter consisting of frame , providing and fixing on wall face unplasticised rigid pvc rain water pipes , providing mixing and applying sbr polymer , providing and injecting approved grout 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work , providing and injecting approved grout cement slurry made with shrinkage compensating cement in concrete rcc work , providing and injecting approved grout epoxy injection grout in concrete rcc work of approved make , providing laying spreading and compacting graded stone aggregate

Central Government/Public Sector

CTN :44721007

22 Apr, 2026 35.99 Lacs

Cuddapah - Andhra Pradesh

Tender For tender for supply of wall painting with acrylic emulsion paint , providing and applying white cement based , finishing walls with acrylic smooth exterior paint , 15 mm cement plaster , neat cement punning , providing and fixing bright finished brass hanging type floor door stopper , painting with synthetic enamel , applying one coat of water thinnable cement primer , 6mm cement plaster , providing and fixing ist quality ceramic glazed wall tiles , white washing with lime , clearing and stripping the site , supply and transport of earth , earth work in excavation , providing and laying in position specified grade of pcc , providing and laying in position specified grade of reinforced cement concrete , steel reinforcement , centering and shuttering , structural steel work riveted , providing and fixing isi marked flush door shutters , providing and fixing concertina coil fencing , with gi barbed wire , providing and fixing gi chain link fabric , removal of wet dry sludge , removal of existing damaged glass , welding by gas or electric plant , removal of existing damaged door , dismantling colour coated roofing sheets , rectifying all defects causing leakage in pre coated iron profile roofing sheets , providing and fixing precoated galvanised iron profile sheets , demolishing rcc work by mechanical means , supplying and applying bituminous solution primer , random rubble masonry , brick work with common fly ash bricks , providing and injecting chemical emulsion , half brick masonry , providing and fixing white vitreous china pedestal type water closet , providing and fixing wash basin , providing and fixing beveled edge mirror , providing and fixing cp brass bib cock , providing and fixing cp brass stop cock , providing and fixing water closet squatting pan , providing and laying ceramic glazed floor tiles , providing and fixing on wall face un plasticised rigid pvc swr pipes , providing and placing on terrace polyethylene water storage tank , providing and fixing inposition collapsible steel shutters , providing and fixing ptmt pillar cock , providing and laying bituminous concrete , sub-base course , base course , providing and fixing brass 100mm mortise latch an dlock with 6 levers , developing lawn , 30 mm thick factory made polyvinyl chloride , providing and fixing gi chain link fabric , do gi pipe 25m dia , 32 mm dia nominal bore , 50 mm dia nominal bore , providing and fixing false ceiling , supplying and filling in plinth , providing and laying dampproof course , finishing with epoxy paint , providing fixing glass panes , providing and laying vitrified floor tiles , providing and laying polished granite stone , providing and fixing stainless steel , providing and fixing stainless steel 24 inch towel rod , providing and fixing of overhead shower , providing and fixing of shower arm casted chrome , providing and fixing with all fittings of angle cock , providing and fixing with all fitting of two way bib cock , providing and fixing with all fitting of float valve , constructing masonry chamber , dry stone pitching , providing and fixing gun metal gate valve , providing and laying 60mm thick faciory made cement concrete interlocking paver block

Central Government/Public Sector

CTN :44728933

22 Apr, 2026 35.00 Lacs

Kamrup - Assam

Tender For repair/ replacement of tiling, pcc, kota stone, wall tiling, plumbing fixing, joinery and other connected work at unit location of 222 abod, md/ otm accn in the aor of the age b/r i under ge narangi

CTN :43889951

06 Apr, 2026 17.31 Lacs

Kota - Rajasthan

Tender For bid to ras supply of nails for fixing wire mess headless nails any make , door spring any make , termiticide 1 litre packing any make , hammer drill machine bit 6 mm any make , hammer drill machine bit 25 mm dia x 450 mm any make , plastic gitti 1 and half inch and 2 inch any make , wall tiles size 300 x 450 mm white colour , floor tiles size 600 x 600 mm , floor tiles size 400 x 400 mm , floor tiles sizes 800 x 800 mm , 19 mm commercial hard board , 6 mm commercial ply wood , 12mm commercial ply , 19 mm hdmr board , 35mm thick flush door , 35mm panelled door marandi wood , 35mm glazed window marandi wood , 35mm wire gauge door or window marandi wood , sal wood chowkhat section 5 inch x 3 inch , sal wood chowkhat section 4 inchx 3 inch , m s hold fast for door chowkhat , 4mm teak ply , sunmica sheet 1mm thick , local hard wood in required section , stone aggregate single size 20 mm nominal size , stone aggregate single size 10 mm nominal size , stone aggregate single size 6 mm nominal size , sand zone v jamuna , stone dust , bolts and nuts up to 300 mm in length , common burnt clay fps non modular bricks class designation 10 point 5 , kota stone slab 20 mm to 25 mm thick semi polished , stainless steel butt hinges 125x64x1 point 9 mm is 12817 marked , stainless steel butt hinges 100x58x1point9 is 12817 marked , stainless steel butt hinges 75x47x1 point8 mm is 12817 marked , weather silicon sealant for glass fixing , rubber gasket for aluminium work , granite of any colour, 18 mm thick , self tapping screw with hex head , sealer , lakh dhana , thinner , ragmar sand paper water proof , pu sealer , pu thinner , metal regmar , touch wood , sprit , chalk powder , polish colour , wooden filler , dhoti white and color , 1 inch wooden margin teak sangwan , 18 inch channel set for counter storage , 12 inch channel set for counter storage , mica cutter , glass cutter , m s door pivot , molding gola pona inch , molding gola 1 inch , molding gola one and half inch , molding gola 2 inch , screw driver , araldite 100 ml , epoxy for tile , wall to wall for curtain , curtain rod lattu knob wooden , curtain rod stand bracket wooden , m s curtain pipe with pvc coating , wooden cutter blade 4 inch , door stopper brass , brass tower bolt 4 inch , brass tower bolt 6 inch , brass tower bolt 8 inch , brass handle 6 inch , door seal for doors , red mohram clay

CTN :44624020

15 Apr, 2026 26.76 Lacs

Jummu - Jammu And Kashmir

Tender For construction of facade walls in semi stone masonry, providing and fixing back lid glass paintings incl allied works at bharat mata (park patoli) park jammu - nature of work: construction of façade walls in semi stone masonry, p/f back lid glass paintings incl. allied works at bharat mata park (patoli park), jammu

Corporations And Associations And Others

CTN :44700648

07 Apr, 2026 13.76 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi - supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg

Ghat Development Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others