Latest gi pipe bracket Tenders | Government gi pipe bracket Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

Central Government / Public Sector

CTN :45742032

06 Jul, 2026 NA

Chittoor - Andhra Pradesh

Tender For supply of stainless steel threaded fasteners as per is 1367(part 14) (q3)

Central Government And Public Sector

CTN :45736831

10 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of high tensile hexagonal head bolt to size m20 x 100mm long (half threaded) to is: 1364, class 10.9 with nut of class 10 to is: 1367, one spring washer to is: 3063 and one plain washer to is: 2016. make: sundram fasteners limited (tvs)/unbrako(pfl)/lps/dfl/gkw only. [ warranty period: 12 months after the date of delivery ] ]

CTN :45737433

23 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of set of fasteners for spring seat and vertical damper of wag7 locos consisting of [1] m24x150/65 hex head bolt to is 1367 grade 8.8 with castle nut [is 2232-67],spring washer [is 3063] and split pin [is 549] [6mm dia hole to be provided on bolt at a distance of 20mm from threaded end] - 3 nos. each. [2] m22 x 120/35 hex head bolt to is 367 grade 8.8 with castle nut [is 2232-67] spring washer [is 3063] and split pin [is 549] [6mm dia hole to be provided on bolt at a distance of 15mm from threaded end]- 2 nos. each [3] m20 x 110/35 hex head bolt to is 1367 grade 8.8 with castle nut[is 2232-67] spring washer [is 3063] and split pin [is 549] [6mm dia hole to be provided on bolt at a distance of 10mm from threaded end]- 2 nos [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45733158

08 Jul, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no.- sse/cs/2026-27/15 desc. - (1) wag-9 lipped racer of wag9 loco - 20 nos. wt..=97.600kgs (2) hanger lever( kbil/ftil make)of wag-9 loco -72 nos. wt..= 907.200 kgs (3) wheel set guide of wag-9loco -15 nos. wt..= 361.500 kgs (4) wag -9 plain racer of wag9loco -20 nos.wt.. 76.200kgs (5) sets of cover of axle box of wag-9loco - 05 sets wt.. 657.500 kgs (6) gear case assembly of wag-9loco -10 nos. wt.. = 2097 kgs (7) torque arm of wag-9 loco - 10 nos. wt.. 241 kgs (8) axle box of wag-9 loco -20 nos. wt.. =2160 kgs (9) miscellaneous (pins ,bushes ,link, friction arm,fasteners, brake equalizers plate ,washers, cotter pins ,turnion,clevis,arm spring ,adjusting equipment ,spacer & tie bar ,equalizer, hanger inside & outside ,nut bolts , safety sling, threaded bolt ... etc) wt..= 1000 kgs total ferrous wt..= 7.598 mt

Central Government / Public Sector

CTN :45726646

21 Jul, 2026 NA

Kazipet - Telangana

Tender For set of fasteners for line contactor/c-145 contactor of wag7 conventional electric locomotives. set consists of 03 items as follows: i) socket head cap (allen screw) size m8x30 mm , full threaded to is:2269, property class:12.9, qty: 01 no. ii) flat washer, id: 8.25mm, od:16 mm,thickness: 1.5mm to is: 2016 qty:01 no. iii) spring washer id: 8.25mm, od: 14.25mm, thickness: 2mm to is:3063 qty:01 no. makes: dfl/lps/tvs/bmi/unbrako or it's equivalent. note: one sample should be got approved before bulk supply of the material . [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

State Government

CTN :44539764

08 Jul, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various fasteners and consumables for chp at utps. (chp maint. (mech) et-6238) - ms hex bolt nut size m 6x50 full thread, ms hex bolt nut size m 8x50 ft, ms hex bolt nut size m 10x40 ft, ms hex bolt nut size m 10x60, ms hex bolt nut m 12x60 (ft), hexagonal head, full thread m. s. bolt with nut of size m 12 x 80 mm, ms hex bolt nut size m 16x90 full thread (f.t.), ms hex bolt nut size m 16x120 ht, ms hex bolt nut m 18x100, ms hex bolt nut m 20x80., ms hex bolt nut m 22x100, ms bolt m 24x100, unbreko make ms nut bolt ( full thread) with double washer size: m30 x 120 mm, s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 10 x 50, hexagonal headed full threaded stainless steel aisi-316 bolts with nuts and two washers.size m 10 x 80 mm long., s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 12 x 50, ss316 fastner hexa head boll with nut(ft)m12x70, ss316 bolt with nut and two washer m16x60, ss 316 full thread bolt nut with washer m 16x100 (one set consists of 01 no bolt , 01 no washer), high tensile hex bolt nut m 10x50 gr.12.9, unbrako make hexagonal bolt, nut & spring washer size m10 x 80 full threaded of grade 10.9, unbrako h.t.hex.bolt nut & spring washer size m.12 x 50 mm., unbreko make ht hex. bolt of m16x50mm with nuts and washer as per is 1364 din 933 and threads as per metric is-4218 bolt 10.9 grade, nut and washer 10.9 grade and having std pitch and thread length i.e. full thread., unbreko make allen bolt size m16x100 grade 12.9, ht hex bolt m 16x130, ms hex bolt nut size m 6x50 full thread, ht nut&bolt with washer carbonsteel size:m16x150, ht hex head bolt nut, m 20x70, ms hex bolt nut size m 8x50 ft, high tensile hexagonal head bolt of size m20 x 120, ht hex bolt nut and washer size m 22x70, ms hex bolt nut size m 10x40 ft, 8.8 grade high tensile bolts with nut and spring washer of size m 22 x 150, ms hex bolt nut size m 10x60, ht hex bolt nut m24x90, high tensile hex head bolt size m 24x120 long mechanical properties as per class 10.9 ., ms hex bolt nut m 12x60 (ft), unbrako make stud bolt with two heavy hex nut m16x60 mm (astm a 193 gr.b7 & a 194 gr.2h), hexagonal head, full thread m. s. bolt with nut of size m 12 x 80 mm, m22x160 l full thread ht stud with two spring washers and two nuts, m.o.c : studs to astm a193 gr.b7 and nuts to astm a194 gr.2h., ms hex bolt nut size m 16x90 full thread (f.t.), m24 x 160 ht grade 8.8, a set of stud with nut and lock washer washer., unbreko make stud bolts size: m30 x 170 mm, ms hex bolt nut size m 16x120 ht, ht allen bolt m 6x 50, unbreko make allen key bolt size: m08 x 50 mm, ms hex bolt nut m 18x100, allen key bolt m 10x50, ms hex bolt nut m 20x80., unbreko make allen key bolt size: m10 x 100 mm, ms hex bolt nut m 22x100, unbreko make allen bolt size m12x60 grade 12.9, ms bolt m 24x100, unbreko make allen head bolt m12x80, allen key bolt size m 16x40, unbreko make ms nut bolt ( full thread) with double washer size: m30 x 120 mm, unbrako alenkey full thread bolt : m . 16 x 50, s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 10 x 50, unbreko make allen bolt size: m16 x 70 mm, hexagonal headed full threaded stainless steel aisi-316 bolts with nuts and two washers.size m 10 x 80 mm long., h.t. allen bolt size of m 20x60 grade12.6, s.s.-316 hexagonal full threaded bolt with nut and two nos. washers size: m 12 x 50, high tensile allen bolt m 24x70 gr.12.9, high grade alloy steel grub screw size m5 x 10 full thread mtl alloy steel 45 h conf to is 6094, ss316 fastner hexa head boll with nut(ft)m12x70, grub screw m 6x16, ss316 bolt with nut and two washer m16x60, unbrako make grub screw of size m6 having length of 20 mm., ss 316 full thread bolt nut with washer m 16x100 (one set consists of 01 no bolt , 01 no washer), high tensile hex bolt nut m 10x50 gr.12.9, unbrako make hexagonal bolt, nut & spring washer size m10 x 80 full threaded of grade 10.9, unbrako h.t.hex

CTN :45673336

06 Jul, 2026 NA

Reasi - Jammu And Kashmir

Tender For supply of laip a type y shaped of 75mm x 75mm x 6mm as per bid specific documents , laip b type of isa 65mm x 65mm x 6mm as per bid specific documents , laip c type of isa 65mm x 65mm x 6mm as per bid specific documents , laip d type of isa 65mm x 65mm x 6mm as per bid specific documents , galvanised iron barbed wire as per bid specific documents , tor panels of size 3.00 x 1.25m made up of 10mm dia as per bid specific documents , angle iron strut picket of isa 65x65x6mm as per bid specific documents , punched tape concertina coil with 50 turns and 1050mm dia and all other spec as per bid specific documents , cement opc 43 grade cement in hdpe bags of 50 kg each as per bid specific documents , sand coarse river sand as per bid specific documents , crushed stone aggregate 20mm as per bid specific documents , ms pole 6m long tubular ms pole as per bid specific documents , led street light fitting 45 watt single piece high pressure as per bid specific documents , mcb 10a capacity suitable for 240 415v ac supply as per bid specific documents , 25 sqmm 4 core pvc insulated as per bid specific documents , 25 sqmm 2 core pvc insulated as per bid specific documents , pvc rfp rectangular junction box as per bid specific documents , mounting arm hang light gi pipe bracket 32mm dia light grade 1.2m long as per bid specific documents , hand gloves as per bid specification , fence cutter as per bid specification , welding rod as per bid specification , tape measuring 50m long as per bid specification , tape measuring 5m long as per bid specification , iron cutter blade bosch as per bid specification , nylon rope 20mm as per bid specification , hdpe tarpulin 20x20 as per bid specification

corporations/Associations/Others

CTN :45632278

06 Jul, 2026 7.60 Lacs

Jhansi - Uttar Pradesh

Tender For supply of fasteners bolts washers b b - ht hex bolt & nut f/t m 6x30 , ht full thrd hex bolt gr 8.8 -is 1364 , is 1367 with nut and plain washer , size- m6x60 , ht hex head bolt with nut and waher m 8x30mm , ht full thrd hex bolt and waher gr. 12.9 -is 1364 , is 1367 , size- m8x60 , counter sunk nut and bolt ht with spring washer 10.2 m8x60 , hexagoanal headed nut & bolt m 10x100 , ss-316 full thread with plain washer , make - unbrako , bolt hex nut washer m10x100 ht 12.9 , hex bolt m 10x70mm , ht bolt m10x150 with 2 no. nuts & washers. , ht hh bolt with nut & washer (full threaded) m12x100 , ht hh bolt with nut & washer (full threaded) 16x80mm. , ht full thrd hex bolt with nut & washer gr. 8.8 -is 1364 , is 1367 , size-m16x120. , ht stud full thrd with double nut and plain washer gr. 8.8 , is 1862 -m8x60 , ht stud full thrd with double nut and plain double washer gr. 8.8 , is 1862 -m8x100 , ht stud full thrd with double nut and plain washer gr. 8.8 , is 1862 -m10x120 , ht stud with double nut & double washer full threaded m12x80mm gr10.9 , ht stud full thrd with double nut and plain washer gr. 8.8 , is 1862 -m16x120 , ht stud full thrd with double nut and plain washer gr. 12.9 , is 1862 -m22x220 , allen bolt m 8x60 mm , allen bolt m6x50mm , ht allen bolts grade a 12.9 m10x60 , ht allen bolt m12x60. , allen bolt m 12x100 mm , ss bolt & nut size 14x80 with 02 washer , ht allen bolt m14x60 , ht allen bolts grade a 12.9 m16x80. , grub screw with allen head gr. 8.8 -m10x50 , item name- grub screw m6x16 , part no. -m01631 , model no.-pnl-20d , make milton roy india pvt. ltd. , ht m grub screw 6x10 mm grade 8.8 make ht fasteners , item name- lock bolt stopper , part no. -200479 , model no- pnm-25d make milton roy india pvt. ltd. , item name - pnm fastener kit , part no. -223719s , model no- pnm-25d , make milton roy india pvt. ltd. , hex bolt m 20 x 100 , gr. 8.8 with nt & sw , ht hex nut bolt half threaded with 01 no. spring & 01 no. plain washer of size 24 x 120 mm , gr. 10.9 , ht nut & bolt m 16x100 mm h/t along with 01 no flat ssp. washer , ht full thrd hex bolt gr. 8.8 -is 1364 , is 1367 with nut and plain washer , size - m20x80 , ht hex bolt m16x80 mm , hex head bolt m20x100 with nut , hex bolt with nut washer full thread m12x40. , allen bolt socket head cap screw m-10x40 , m16x65ht hex head bolts with nut and plain washer grade a 12.9 , hex bolt m 16 x 50 , gr. 8.8 , soc head screw m 12x45 , hex hd cup screw 1/2x1 , ht hex bolt with nut full thread 16x150. , hex head bolt m16x220 , m20x40 full thread ht hex head bolts with nut and plain washer grade a 12.9 , m20x50 full thread ht hex head bolts with nut and plain washer grade a 12.9 , m20x80 full thread ht hex head bolts with nut and plain washer grade a 12.9 , full thread ht socket countersunk head cap screw m10x30 , socket screw (allen head) m10x30mm gr10.9 , m10x40 ht 10.9 allen bolt . , allen bolt with spring washer ht 10.2 m24x110 , m12x50 full thread ht hex head bolts with nut and plain washer grade a 12.9 , m16x40 full thread ht hex head bolts with nut and plain washer grade a 12.9 , m16x50 full thread ht hex head bolts with nut and plain washer grade a 12.9 , m16x60 full thread ht hex head bolts with nut and plain washer grade a 12.9 , m16x80 full thread ht hex head bolts with nut and plain washer grade a 12.9 , ht full thread hex bolt gr. 12.9 -is 1364 , is 1367 with nut and plain washer , size- m10x25 , ht full thread hex bolt gr. 12.9 -is 1364 , is 1367 with nut and plain washer , size- m10x40 , ht full thrd hex bolt gr. 12.9 -is 1364 , is 1367 with nut and plain washer , size- m10x50 , full thread hex head bolt with nut & washer m20x30 ht 10.9 grade , ht hex head bolt & nut and washer f/t m 6x30 , ht hex head nut bolt and washer m 10x70mm , hex nut bolt and washer m10x70 ss316 , ht allen bolt size 14x80 . , grub screw m 6x30. , mild steel hexagonal head nut , size m11 , high tensile hex head half threaded bolt wi

Gi Pipe Bracket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government And Public Sector

State Government

corporations/Associations/Others