Latest gi washer Tenders | Government gi washer Tenders

State Government

CTN :44738529

17 Apr, 2026 55.81 Lacs

Dumka - Jharkhand

Tender For 449/pr/jbvnl/2025-26 - procurement of trw materials/items under o&m(trw) head 2025-26 - trw items :, m seal, ht bushing coller (4 hole), ht bushing coller (6 hole), al. clamping member, rubberised gaskit sheet 3x2x1/8", rubberised gaskit sheet 3"x2"x1/4", rubberised gaskit sheet 3"x2"x1/5", nuts & bolt with washer different size (gal. full thread), al.netural clamp, in line connector size 16sqmm, in line connector size 10sqmm, in line connector size 6 sqmm, cotton waste, silicagel breather for 100 kva, silicagel breather for 63 kva, silicagel breather for 25 kva, silicagel breather for 200 kva, press board 1 mm, press bord 2 mm, press bord 3 mm, crape paper tape 25 mm, insulating paper tape 2.5mil (20 mm), insulating paper tape 2.5mil (25mm)

Central Government/Public Sector

CTN :44824054

27 Apr, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of 6400 mm curved switch with 60e1a1 thick web tongue rail and 60 kg. 60 e1 r260 grade stock rail for 1 in 8.5, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-9775 alt. 2 or latest alt if any with elastic fasteners and spring operated setting device (rdso- t - 6216 with latest alteration), confirming to irs specification no. t - 10 - 2025, irs t- 12 - 2009 for flat bottom rails and irs t- 62 - 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t- 55 - 2025 (rev. 1) or latest if any and supply of all components/fittings listed as per annexure-a and excluding elastic rail clips, insulating liner, plate screw & single coil spring washer etc. (the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. (i) note: - the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost / per set) in termsof railway board letter no. 2022 / track-i(p)/fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching / embossing on each set of tws, so that it can be correlated with the type of set- i.e., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings with each set as per note-26 of rdso drg. t-9775 alt. 2 of list ' a '. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44824062

04 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of 10125 mm curved switch with 60 e1 a1 thick web tongue rail and 60 kg. 60e1 r260 grade stock rail for 1 in 12, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-8780 alt. 4 or latest alt if any with elastic fasteners and spring operated setting device (rdso-t-6216 with latest alteration), confirming to irs specification no. t- 10- 2025, irs t-12-2009 for flat bottom rails and irs t- 62- 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t- 55- 2025 (rev. 1) or latest if any and supply of all components/fittings listed as per annexure-a and excluding elastic rail clips, insulating liner, plate screw & singlecoil spring washer etc. ( the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. note: -(i) the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost / per set) in terms ofrailway board letter no. 2022/ track-i(p) / fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching/embossing on each set of tws , so that it can be correlated with the type of set- i. e ., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings with each set as per note-28 of rdsodrg. t-8780 alt. 4 of list 'a'. [ warranty period: 30 months after the date of delivery ]

CTN :44653658

11 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras supply of construction material cement opc 43 grade packed in hdpe bag each 50 kg wt under job no 2368 list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , water proofing compound confirming to is 2645 2003 make pidilite and dr fixit and fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , cement based paint snowcem make berger and asian and nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger and asian and nerolac , synthetic paint enamelled brown confirming to is 5 2004 make berger and asian and nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger and asian and nerolac , steel items loop holes 1000 x 300 mm make tata and sail and jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame , ms binding wire tata and sail and jsw , ismb hot rolled ms 125 4000mm long make tata and sail and jsw , ismb hot rolled ms 125 1200mm long make tata and sail and jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , prefab mild steel door of size 900x1700 outer frame made out of isa 40x40x6mm and door shutter , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make tata and sail and jsw , preferb folding double sleeping sleeping bunks made of ms columns , shuttering and nails wooden planks for shuttering iind class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various sizes , nails various size , lightening conductor earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make jindal and tata and kalinga , gi pipe 20 mm dia light grade make jindal and tata and kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto and polycab and finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , aluminium strips 25 x 3 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe make jindal and tata and kalinga , galvanized iron strip 32 x 6 mm

CTN :44653678

11 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras supply of construction material cement opc 43 grade packed in hdpe bag each 50 kg wt under job no 2366 list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , water proofing compound confirming to is 2645 2003 make pidilite and dr fixit and fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , cement based paint snowcem make berger and asian and nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger and asian and nerolac , synthetic paint enamelled brown confirming to is 5 2004 make berger and asian and nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger and asian and nerolac , steel items loop holes 1000 x 300 mm make tata and sail and jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame , ms binding wire tata and sail and jsw , ismb hot rolled ms 125 4000mm long make tata and sail and jsw , ismb hot rolled ms 125 1200mm long make tata and sail and jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , prefab mild steel door of size 900x1700 outer frame made out of isa 40x40x6mm and door shutter , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make tata and sail and jsw , preferb folding double sleeping sleeping bunks made of ms columns , shuttering and nails wooden planks for shuttering iind class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various sizes , nails various size , lightening conductor earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make jindal and tata and kalinga , gi pipe 20 mm dia light grade make jindal and tata and kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto and polycab and finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , aluminium strips 25 x 3 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe make jindal and tata and kalinga , galvanized iron strip 32 x 6 mm

CTN :44598696

10 Apr, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of as per ts , gate size 3 mx 2m double leaf frame made of angle iron 75x 75x6mm isi grade with shutters made of reinforcement tmt bar 12 mm dia as per ts , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac or equivalent , white lime , cement based paint snowcem of make berger or asian or nerolac or equivalent , three phase 1point 2 hp monoblock pump 430 volt complete and incl 3 mtr length required size flexible suction pipe foot valve as per ts , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia 2 point 5 mtr , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , non woven geotextile 500gsm as seperation layer between wall and pvc mebbrance with provision of pvc disk and anchor faster for wall as per ts , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness minus 2 mm 5parcentage as per ts , non woven geotextile 500gsm as protective layer of pvc water proofing membrance with provision of high quality adhesive as per ts , non woven geotextile 500gsm as seperation layer between foundation and pvc mebbrance properties of geotextile 500 gms as per ts , non woven geotextile 500gsm as protective layer of pvc membrance properties of geotextile 500gsm properties of for wall as per ts , non woven geotextile 500gsm as seperation layer between deck slab and pvc mebbrance properties of geotextile 500 gms as per ts , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane as per ts , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive as per ts , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , pvc pipe 75 mm dia 3 mtr long make prince finolex supreme

CTN :44467473

14 Apr, 2026 NA

Bardhaman - West Bengal

Tender For corrigendum : tender for supply of generator spare e e -gth100s brg oil gaurd brg sealing st , gth100s insulating washer epoxy 18 25x3 , sos gth100 seal spring wg4 322008r0001 , gth100s seal bearing spring , gth100s brushgear insultn sleeve17 22x43 , cord neoprene 50 59 sq 8 mm

Central Government/Public Sector

CTN :44792023

16 Apr, 2026 NA

Madurai - Tamil Nadu

Tender For nylon 66 point insulations complete set with rdso spec no-irs s 40/84 or latest consist of 1.gauge tie plate insulation one set (insulating plate drg no. t-10372=01no, insulating bush drg no.t-10368=03 nos, insulating washer drg no.t-10371=06 nos) 2. d bracket insulation one set (insulating plate (rh) drg no.s-3265=01no, insulating plate (lh) drg no.s-3266=01 no, insulating washer drg no.s-8640=04nos,insulating bush drawing no.s- 23199=04nos) 3.stretcher bar insulation one set (insulating plate drg no.t-10367=01no, insulating bush drg no.t-10368=02 nos, insulating washer drg no.t-10371=04nos) 4. l bracket insulation one set (insulating plate drg no.s-8804=01no, insulating washer drg no.s -8640=02nos, insulating bush drawing no.s-8813=02nos) (warranty period : upto 30months from the date of supply) acceptable make: arham,paras & aew [ warranty period: 30 months after the date of delivery ]

CTN :44653674

08 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of construction material cement opc 43 grade packed in hdpe bag each 50 kg wt under job no 2366 list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , water proofing compound confirming to is 2645 2003 make pidilite and dr fixit and fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , cement based paint snowcem make berger and asian and nerolac , synthetic paint enamelled og confirming to is 5 2004 make berger and asian and nerolac , synthetic paint enamelled brown confirming to is 5 2004 make berger and asian and nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger and asian and nerolac , steel items loop holes 1000 x 300 mm make tata and sail and jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame , ms binding wire tata and sail and jsw , ismb hot rolled ms 125 4000mm long make tata and sail and jsw , ismb hot rolled ms 125 1200mm long make tata and sail and jsw , srt 1840 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata and sail and jsw , prefab mild steel door of size 900x1700 outer frame made out of isa 40x40x6mm and door shutter , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make tata and sail and jsw , preferb folding double sleeping sleeping bunks made of ms columns , shuttering and nails wooden planks for shuttering iind class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various sizes , nails various size , lightening conductor earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make jindal and tata and kalinga , gi pipe 20 mm dia light grade make jindal and tata and kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto and polycab and finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , aluminium strips 25 x 3 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe make jindal and tata and kalinga , galvanized iron strip 32 x 6 mm

Central Government/Public Sector

CTN :44764022

21 Apr, 2026 NA

Erode - Tamil Nadu

Tender For supply of insulating rod with necessary hardwares for terminals of hitatchi tm as per clw drawing no. 3twd.092.188 alteration-5 with galvanised hexoganal bolt of size m20 x 55 with suitable flat & spring washer [ warranty period: 30 months after the date of delivery ]

Gi Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector