Latest gi angle Tenders | Government gi angle Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

CTN :45551266

01 Jul, 2026 NA

Kharagpur - West Bengal

Tender For w acting for and on behalf of the president of india invites e-tenders against tender no e-73-dyceekgpw-cbc-26-27 closing date/time 01/07/2026 15:00 hrs. bidders will be able to submit their original/revisedbids upto closing date and time only. manual o ers are not allowed against this tender, and any such manual o erreceived shall be ignored.1. nit headername of workupgradation of cbc overhauling section and corrosion repair shop of wagonrepair shop, kharagpur workshop.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime01/07/2026 15:00date time of uploadingtender09/06/2026 16:38pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 2402108.76tendering section elegenbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 48100.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 17/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-cost of supply of material for electrical work1712792.421a12.00numbers383500.00 767000.00 at par 767000.00description:- supply of incoming 1x 630a,4p, 50ka mdo type microprocessor based acb withipr1+ release & outgoing (i)2 x 320a,4p, 36ka thermal magnetic release with adjustable thermal &fixed magnetic mccb (ics=100%icu),(ii)2 x 200a,4p, 36ka thermal magnetic release withadjustable thermal & fixed magnetic mccb (ics=100%icu),(iii)4 x 100a,4p, 36ka thermal magneticrelease with adjustable thermal & fixed magnetic mccb (ics=100%icu) tted in lt panel box14swg crca sheet powder coated 4way cu busbar of suitable rating, indicator lamp, digitalmultifunction meter & all other accessories. mccb & acb make:- havellls/ lk/ schneider/siemens.2a210.00numbers 400.02 4000.20 at par 4000.20description:- supply of mcb metal enclosure 4 pole3a380.00numbers 413.00 33040.00 at par 33040.00description:- supply of pyramid insulator as per drawing4a470.00numbers 531.00 37170.00 at par 37170.00description:- supply of pin type insulators as per drawing.5a550.00numbers1121.00 56050.00 at par 56050.00description:- supply of gi-angle (40 x 40 x 06 mm) bracket 4 way with porcelain insulator as perdrawing suitable for overhead light.6a610.00numbers 248.98 2489.80 at par 2489.80description:- supply of mcb metal box 2 pole7a720.00numbers1323.96 26479.20 at par 26479.20description:- supply of 16/20/25a power unit (containing 4 module plate, starter, socket and plug)for ac unit.8a85.00numbers11434.20 57171.00 at par 57171.00description:- supply and testing of oscillating type bldc pedastal fan, 230 v,400 mm sweep,multi speed, remote/button controlled make- atomberg, havells, crompton, bajaj, usha, orient.9a9 150.00 metre1150.50 172575.00 at par 172575.00page 1 of 18run date/time: 09/06/2026 16:38:46kgp-workshop-electrical/south eastern rlytender documenttender no: e-73-dyceekgpw-cbc-26-27closing date/time: 01/07/2026 15:009description:- supply of hot dip galvanized 2mm thickness perforated cable tray of size 300 mmwidth and 50 mm height and complete accessories as per is, ie rules and site requirement10a10 50.00 metre 575.25 28762.50 at par 28762.50description:- supply of cable trays 2mm thickness size 100 x 50 mm gi, perforated (rmt) withcover complete and as per is, ie rules and site requirement.11a11 10.00numbers 180.54 1805.40 at par 1805.40description:- supply of combined switch socket box - 16 a, capton 5-in-1 combined switch andsocket with isi mark,as per is:3854 or latest12a122.00numbers34700.26 69400.52 at par 69400.52description:- supply of 4 pole mccb ,release range (80-200)a, breaking capacity 36 ka,microprocessor release with inbuilt earth pr

Central Government/Public Sector

CTN :45515759

23 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap m.s melting iiird class i.e. rail pieces below one mtrs of various poundage 60/52kg/ 100/ 90/82/75/35lbs & rail/point &xing materials melted peices, rail flange,rail gola,rails bladges ,broken gate structure of angle, fish plates , broken released jfp, broken f/plate jn. f/plates of various poundage, grider cut pcs, bridge checker plate, conversion material, wooden &t/out bearing plate, slide chairs, welding riser material , broken erc, two way keys, ¿j¿ type erc, m.s. liner, check rail cut pcs, t/rails, s/r, w/r,v/rail cut pieces, washers, tie bars, tie bars fencing, released hook bolt , xing bolt, fish bolt, stud bolt , strecharbar bolts, nut washrs various types ,g/joints of rail 60/52kg, bridge girder broken materials ,released gates materials, various types section boards, st & xing sleepers cut pcs, sej cut rail pcs of t/r, s/rail, stretcher bar, switch chairs ,plate screw, bar strainghting crow bar, beater- pick, pans. mortor, wire, basket, shovel, rail- tong, hs lamp, wire clow, pawrah, various type hammers, augers, adzes, drills,pad lock,blunt ended crow bar , bar claws bar tommy, ballast rake, boxes tools iran,gauge, chain gates, cold sets, jim crew, push trolly, pick axes ,gi bukcet, panches pin slopping, solid box spanner, double face trolly lamp, empty drum 20litrs cap., grease & oil empty drum, adjustable spanner, e.r.c extractor, first aid box for rail fracture, rail dollies , spanner- f/ bolt & light weight , light weight rail cum road trolly,abrisive rail cutting base, drilling machine,chamfering bit, spare part of champring kit,thermit welding tools equipment & accessories 52kg/60kg and mechanical equipment , push trolly wheels, welded chain,whistel, m.s.angle, m.s.rod, m.s.sheet, ballast screen, straight edgs 1 m long/10cm, universal molding, vapariser keys, stand, welding equipment & tools box, crucible charge, bend pipe, chisel, various type boards, plier com, various type drills ,augers, cutter 52kg/60kg, tourches,crushible carring ring,fork, stand, nozzal, moluld shoes 60kg/52kg, tourch house pipe switch fittings & various types of p.way fittings, rpf theft case/cort case (rail/point & xing materials melted peices, rail flange,rail gola,rail bladge ) property inclueds etc¿¿¿.¿¿.

CTN :45353386

19 Jun, 2026 NA

Seoni - Madhya Pradesh

Tender For corrigendum : supply of gi angle, channel and plate as per boq-sow-tds

corporations/Associations/Others

CTN :45495363

23 Jun, 2026 3.60 Lacs

Villupuram - Tamil Nadu

Tender For supply and delivery of kitchen equipments for amma unavagam in villupuram municipality - supply and delivery of steam boiler with stand & burner water capacity 250 liters, operated by both lpg and fire wood, outer shells 8mm ms plate, inner shells 14 g (2.5mm thickness) 304 grade ss with 10 g (3mm thickness) 304 grade ss sheet, automatic float valve assembly, safety valve, pressure gauge meter, water level indicator, drainage valve, flame sensor, rubber gasket for inner vessel lid, ms stand 45x45x6mm angle, high pressure burner, ncv with fittings for lpg and chimney 10 feet.(to generate steam) , steam generator (m.s outer :28 dia x 45 h, s.s inner 17 dia x 35 h) , m.s.fire bar stand , 6 " dia ms smoke pipe (3feet) , supply and delivery of rice vessel 25 kgs capacity, operated on steam made out of 14 g (2.5mm thickness) 304 ss sheet, lid and tilting handle, side support ‘u’ clamp, unloadable by tilting the handle, mounted on a type tubular ss stand 6mm thickness, ss flat with lick rod.(rice cooking & mu ltipurpose vessel) , supply and delivery of dhal vessel 25 kgs capacity, double jacketed, made out of 14 g (2.5mm thickness) 304 grade ss sheet with lid, tilting handle, side support ‘u’ clamp safety valve, steam trap, unloadable by tilting handle, mounted in a type tubular ss stand 6mm thickness ss pipe, ss flat with lock rod.( size 16" dia x 16 h , 50 ltrs to make dhal without mixing steam in dhal) , supply and delivery of single burner cooking range size : 24”l x 24”b x 18”h, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four sides, pan support : 1 no cast iron grid, burner : 1 no, t 35 high pressure burner lpg with fittings, ncv : 1 no, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs.(for cooking purpose) , supply and delivery of double burner cooking range size : 48”x27”x16”, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four side, pan support : 2 nos cast iron grid, burner : 2 nos, t 35 high pressure burner lpg with fittings, ncv : 2 nos, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs. , supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, pulvariser grinder and other equipments , ss rice karandi, big size , ss sambar karandi, big size , ss water drum 50 litres capacity , ss water jug , ss plates, round plain , ss tumblers, with curved edges, 300 ml capacity , mobbu , plastic tray , plastic pot , plastic mug , plastic drum, 50 litres , plastic container (10 litres , plastic muram , plastic stool medium , cloth mat , hot box , mixer heavy duty 1 hp, 3 jar , tilting grinder 15 litres capacity , wall clock , supply and delivery and fixing of r.o plant isi make, with control panel, sand filter vessel, carbon filter vessel, 10 micron filter, 4 membrane, 4 membrane housing, 10 filter housing, 2 pressure gauge, booster pump (cri), 2 vessel valve, pebbles as required , gst. 18% (cgst-9%, sgst-9%) , , , , , ,

State Government

CTN :45502791

09 Jul, 2026 NA

Parganas - West Bengal

Tender For fabrication, galvanizing, testing, supply and delivery of different 33 kv, 132 kv substation structure including g.i nuts, bolts and washers matching with the above structures and different sizes g.i. angle section, flat at different substation

CTN :45498945

20 Jun, 2026 NA

Jaisalmer - Rajasthan

Tender For supply of supply of desert cooler size 27 inch width x 20 inch length x 36 inch hight with power cotack with honeycom water tank height 9 inches water capacity 90 ltrs motor isi marks heavy duty , s and i ro plant cap 50 lph steel body high pressure housing and sadimant filter complete system one year warranty heavy duty isi marked , s and i digital camera eos r50 4k 30p full hd 120p movie rcording movie is movie for close up demos mode focus breathing correction 24 point 2 mp aps c cmos sensor up to 15 fbs continuous , s and i pa eqpt amplifier 500w and 2 x speaker 400w with 02 wireless mics heavy duty isi marked , s and f ms angle iron cooler stand size 24 inch width x 19 inch length x 36 inch hight with black color paint heavy duty isi marked , s and i aadhar enabled biometric attendance system with complete set heavy duty isi marked , s and f koren evergreen higher reflective retro base with white radium cutting reflective letters pasting work size 57 inch length x 33 inch wedth both side

CTN :44687486

12 Jun, 2026 NA

Lohit - Arunachal Pradesh

Tender For bid to ras supply of equilateral triangular signage board made of 4 mm thick acp size 900mm with angle post of 3 mtr ht and coated in two coats of red oxide and two coats of enamel paint as per irc 67 2022 as per appx a , equilateral triangular signage board made of 4 mm thick acp size 600mm with angle post of 3 mtrs ht and coated in two coats of red oxide and two coats of enamel paint as per irc 67 2022 as per appx b , rectangle signage board made of 4mm thick acp cheveron yellow black rt and lt comb size 600x450mm with post of 3 mtr ht and coated in 2 coats of red oxide and 2 coats of enamel paint as per irc672022 , retro reflective informatory road sign board made of 4 mm thick acp with angle post of 3 mtr height and coated in two coats of red oxide and two coats of enamel paint as per irc 672022 as per appx c , delineator mild steel road delineator rectangular fixed size of height 110 cm x width 9 cm , supply fixing and erection of 11pt00 mtr span overhead structure comprising of two verticle posts of 6 mtr ht 300mm nb ms pipe with micro prismatic type iv rr sheeting as per irc 67 2022 as per appx d , reflective sigh board, as per sample attd for design speed 50 kmph size 140 mm or as per table 12 pt1 of irc 67 2022 size of board min 4x3 ft with two angle post of 3 mtr ht as per attd at appx e , providing and fixing stainless steel bus stand shelter surface finish enamel paint colour customize colour dimension 20 feet x 6 feet, roof material stainless steel , providing and fixing public toilet modular type prefabricated 4 seater size 3x12x7ft mobile toilet with tank capacity 900l , w beam metal crash barrier 4318 mm per set as per irc119 2015 complete set ) /bid number : gem/2026/b/7394067 * /dated: 28-03-2026 & & / bid document 1 / 16

Central Government/Public Sector

CTN :45474981

26 Jun, 2026 14.85 Lacs

Bangalore - Karnataka

Tender For technical bid for supply of hvac operational spares , bearing (6206) size: od, 60 mm x id 50 mm ball bearing desig: 6001-z, ball bearing desig: 6307/2z c3 universal hvac/r controller, armoured 4 core x 6 sqmm xlpe copper cable. 1 sqmm frls multi stranded copper cable (single wire), 10 sqmm frls multi stranded copper cable (single wire) 4 sqmm frls multi stranded copper cable (single wire), fibre glass insulated copper wire for heater size: 6 sqmm, alkaline battery volt: 9vf sealed maintenance free (smf) lean-acid battery 7ah 12v, brush width: 3 inch for painting work. loctite 495 adhesive, kiwi drain cleaner heavy duty industrial safety gloves - cut-resistant (mechanical work), spray foam insulation (pfu) can qty: 750 ml wd 40 multipurpose spray size: 500 ml, green paint (bus green synthetic enamel black paint (synthetic enamel), ms flat bar size: 40 x 5 mm ms l- angle size: 25 x 25 x 5 mm, ms l- angle size: 40 x 40 x 5 mm metal primer (red oxide), black color spary paint 400 ml thread repair helicoil insert ss-m18 x 2.5mm x 1.5d, thread repair helicoil insert ss-m20 x 2.5mm x 1.5d thread repair helicoil, insert ss-m24 x 3mm x 1.5d thinner for oil-based paints, wire type buffing whee bench grinder wheel -heavy grade, dial test indicator (dti) gauge with flexible stem magnetic base stand, digital clamp meter capacity: 600a ac trms heavy duty exhaust fan, size: 9 inch backward curved fan with motor size: 355, mm dia ventilation fan for electrical panel sweep, dia: 12 cm induction motor fan, blade shaft size: 20 mm & blade dia: 130 mm, induction motor fan blade shaft size: 25 mm, & blade dia: 110 mm gi 6 mm x 25 mm bolt & nut with washer, anchor bolt with nut & washer size: 10 mm anchor bolt with nut &, washer size: 8 mm anchor fastner size: 10, mm for threaded rod gi self tapping screw, size: 3/4 inch (20 mm) head type: truss, pop screw size: 1 inch (25 mm) head type: flat (csk). ss self tapping screw size: 2 inch (50 mm), head type: hex din rail size: 35 x 7.5 mm, add on auxiliary contact block (1 no +1 nc) casing and capping size: 20mm (3/4 inch), casing and capping size: 50mm (2 inch) copper strip for electrical motor size: 25 x 3 mm, current transformer (for mfm/ammeter), ratio: 10/5a current transformer (for mfm/ammeter), ratio: 15/5a, current transformer (for mfm/ammeter), ratio: 20/5a current transformer (for mfm/ammeter), ratio: 30/5a, current transformer (for mfm/ammeter), ratio: 5/5a emergency stop switch, metal enclosure electrical junction box, size: 200mmx200mmx150mm, metal enclosure electrical junction box size:, 300mmx300mmx200mm three pole neutral (4p), 32 amps miniature circuit breaker (mcb) 4-way mcb metal enclosure, 2- module surface mounted pvc box. thermal overload relay, range: 14-23 amps electronic fan regulator, single module porcelain heater insulators or terminal. blocks, led indicator color: amber pin type lug size: 1.5 sqmm, pin type lug size: 2.5 sqmm pin type lug size: 4 sqmm, pin type lug size: 6 sqmm spade type lug size: 1.5 sqmm, spade type lug size: 2.5 sqmm metal flexible conduit size:19, motor protection circuit breaker (mpcb) range: 6.3-10 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 2.5 amps (rotary), motor protection circuit breaker (mpcb) inst trip rating: 25 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 50 amps (rotary), ms conduit size: 25 mm motor terminal block range: 10 hp/7.5 kw, motor terminal block range: 40 hp/30 kw thermal overload relay(olr) range: 20-33 amps, thermal overload relay(olr) range: 42-69 amps plug top 3 pin capacity: 5 amps, 4 pole power contactor capacity: mnx 12 4 pole power contactor capacity: mnx 18, 4 pole power contactor capacity: mnx 9 push button (illuminated) color: green, push button (illuminated) color: red plugable interface relay (4 c/o, 230 vac) with base, plugable interface relay (4 c/o, 24 vac) with base analog timer controller for split ac's, terminal block range: 0.2-2.5 sqmm,

Central Government/Public Sector

CTN :45479292

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of speed board 01 meter dia, triangle type thickness-02 mm with ms angle frame and 3m retro reflective stickering and with ms angle stand size-50 x 50 x 05 mm, length- 3.6 meters, as per attached drawing. 20kmph = 1 no., 30kmph = 10 nos., 40kmph = 3 nos., 45kmph = 7 nos., 50kmph = 2 nos., 55kmph = 1 no., 60kmph = 3 nos., 65kmph= 11 nos., 70kmph = 2 nos., 75kmph = 8 nos., 80kmph = 5 nos., 85kmph = 5 nos., 90kmph = 2 nos., 95kmph = 12 nos., 100kmph = 3 nos., 105kmph = 5 nos. [ warranty period: 30 months after the date of delivery ] ]

Gi Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector