Latest gi bolt Tenders | Government gi bolt Tenders

Central Government/Public Sector

CTN :44774224

29 Apr, 2026 NA

Multi City - Multi State

Tender For supply of contact wire parallel clamp groove pg 1030-3 with gi bolt 16x50x38mm with nut and spring washer, as per rdso specification no.ti/spc/ohe/fittings/0130-10/13-rev-1 & rdso drawing no. eti/ohe/p/1030-3, rev-a. make-rdso approved source only [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44479181

13 Apr, 2026 NA

Surat - Gujarat

Tender For corrigendum : supply of supply spares of sfsb cooling pumps d d -constant level oiler ,item no. 4811 and as per attached details , o-ring size id 152 mm x chord dia 5 mm item no. 4250-1, material epdm and as per attached details , o-ring size id 80 mm x chord dia 3 mm ,item no. 4250, and as per attached details , casing split flange gasket size id 850 mm x od 1150 mm x thk 0.18 mm and as per attached details , suction slip on flange gasket size id 462 mm x od 533 mm x thk 3 mm and as per attached details , delivery slip on flange gasket size id 462 mm x od 533 mm x thk 3 mm and as per attached details , bearing isolator size 75 mm ,item no. 2785-2, and as per attached details , bearing isolator size 69 mm ,item no. 2785-1, and as per attached details , impeller wear ring ,item no. 1600, and as per attached details , casing wear ring ,item no. 1181, and as per attached details , locking washer ,item no. 3020, and as per attached details , lock nut size m70 x 2 ,item no. 3010, and as per attached details

Central Government/Public Sector

CTN :44483378

15 Apr, 2026 1.25 Crore

Delhi - Delhi

Tender For corrigendum : supply of ortho d d - schanz screw , denhams pin , steinman pin , universal external fixator clamp , tube to tube clamps , tubular rods , forearm fixator clamps for pins , forearm fixator connecting rods all sizes , forearm fixator radio lucent carbon connecting roads all sizes , jess distractor , spanners , box spanner , illizarovwire , olive wire , threaded rods , partial threaded rods slotted , half rings , 5 8 rings , rings with curved extremities , illizarov italian femoral , multiple pin fixation clamp , pin fixation bolts , 13mm nuts stainless steel , oblique support with thread stainless steel , telescopic rods , graduated telescopic rods , hinge female standard, low profile , 90 degree hinge standard low profile , post female , post male , knurling post male stainless steel , cannulated knurling bolt stainless steel , universal joint stainless steel , rotational and translational device , short connection plates , curved plates , short connection plates , connection plates withthreaded ends , long connection plates , bushing , twisted plates length , threaded sockets length , wire fixation buckle , wire fixation bolts cannulated , connection bolts diameter , nut thin nut nylon insert nut square nut illizarov , flat sided washers , spacing washers , split locking washers , conical washer couple , star washers , blocks for half pins , sleeves , rail fixation system , pediatric rail system , central clamp rail fixator , end clamp rail fixator , swivel clamp rail fixator , metaphyseal clamp rail fixator , ball socket clamp standard rail fixator , tball socket clamp rail fixator , compression distraction rail fixator , graduated swivel clamp , central clamp , dyna ring clamp , t clamp rail fixator , tend clamp , sandwich plate rail fixator , bolt for sandwich plate , end clamp , half pin size , dynamic external fixator , self adjusting clamp with ) /bid number : gem/2026/b/7355902 * /dated: 16-03-2026 & & / rate contract bid document this rate contract bid is governed by general terms and conditions of rate contract 1 / 119 & & ' ' /item category medium dynamic , elbow clamp rail fixator , cortical screws for fixation of small bones , cortical screws for fixation of small bones low profile head , cortical screws for fixation of small bones, low profile head , cortical screws hexagonal , cortical screw , cannulated cancellous screw , partially threaded cancellous screw with washer , cannulated screws , solid cancellous screws , washer stainless steel and titanium , washer for screws , herbert screw , mini fragment plates , sfs dcp , reconstruction plates , low contact dcp , tubular plates , narrow low contact locking compression plate , broad low contact locking compression plate , distal radius dorsal anatomical locking plates , radial styloid anatomical locking plates , distal radius volar lcp , anatomical distal radius , anatomical locking plate for wrist arthrodesis , distal ulna hook plate lcp , radial head anatomical locking plates with screws , proximal radius anatomical locking plates for fixation of radial head and neck fractures , proximal ulna anatomical locking plate suitable for fixation of proximal ulna fractures , distal humerus anatomical locking plate set , distal humerus anatomical metaphyseal locking plate suitable for fixation of metaphyseal fractures of the distal humerus , distal humerus extraarticular lcp 6 locking screws and 6 cortical screws 6 to 14 holes , distal humerus extraarticular lcp , distal humerus lcp , distal medial humerus lcph , distal medial humerus lcp , philos short , philos long , humerus il nail cannulated , clavicle locking hook plate , superior anterior clavicle lcp , anatomical locking lateral end clavicle plate , scapula acromion plate , scapula glenoid plate , scapula lateral border plate , scapula lateral border plate , scapula medial border plate, , scapula medial border plate , symphysis pubis plate , pelvic recon plate , pelvic curved recon pl

Central Government/Public Sector

CTN :42352672

10 Apr, 2026 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of lta gem 10 128 1 part ii d d - anchor nut , anchor nut , a/nut , nut rivet , a/nut , anchor nut , anchor nut , anchor nut , nut , ancher nut , nut , chor nut , anchor nut , nut self locking , anchor nut , thread insert , insert , insert , thread inserts , thread inserts , insert , thread insert , helicoil insert , blind rivet nut , nut , nut point , bearing , nut , nut

CTN :44774242

29 Apr, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of spring type pvc drain pipe with jaali threaded dia 45 mm. and their locking nut will be of ss, make-polo, flexiwell, kiwi or similar. [ warranty period: 30 months after the date of delivery ]

CTN :44624116

07 Apr, 2026 NA

Bhilai - Chhattisgarh

Tender For biennial rate contract with bhel for supply of spares - field controller:areca-iii , m/s bhel, hnk:valve spindle(rhs), assembly of gland ring exhaust pedestal, assembly of gland ring cover gen end, set of glands 30 mw tg, thermocouple drb-200 l=6000 part no. : ., thermocouple type-dra-300 hpt bearing pa, thermocouple for esv, rtd d-1;l=140mm,d=6mm,1/2"m, turb stm temp ,t/c, tc:b,l=375,d6mm,dup, thermocouple type b l=515, hpt brg mtl temp,t/c, turb/seal temp,t/c, hwm-846, t/c type-b;l=465mm;esv+hpcv, xrp883:journal shaft assy, complete flame scanner head assembly. pa, fibre optic cable for flame scanner part, lens barrel assembly for scanner part no, housing elet mod, connectors:connector prefab. cables 5mts, flame scanner lens part no. : - drg no., collimator assembly for flame scanner pa, compression spring for flame scanner, bhel-3:c3000spl-glvsw-mo-f2250mm:complet, bhel part iii:c3000-sv-sw-hw-f22 2":comp, bhel part iii:c3000-sv-sw-hw-f22,1":comp, bhel part iii:glv-c-1500-sw-hw a-1051":c, 2-c1500-sv-sw-hw-f22:comp. valve assy(hw, bhel part iii:c800-svsw-hw-a105sst1/2":c, bhel part iii:c2500-sv-sw-hw-f22,size 1", 25nb-c-800-hw:complete assy., bhel-4:2-c2500-glv-hw-sw-f22:complete as, bhel part iii:c1500-sv-sw-hw-f221-1/2":c, bhel part iii:c800-sv-sw-hw-a105-sst 2":, bhel part iii:glv-a-105-c1500-sw-1-1/2":, bhel part iv:c1500-sv-sw-hw-a105-1/2":co, bhel part iii:c1500-sv-sw-hw-f22 1":com, xrp883:multiport outlet and liners, xrp883:seal wear ring, xrp883:bull ring clamping ring(4 seg./se, xrp883:spring stud brg(wear sleeve), xrp883:bowl hub cover for bowl mill xrp-, xrp883:trunnion shaft end cap-thrust end, xrp883:trunnion shaft end cap-free end, xrp883:trunnion bushing retainer, xrp883:thrust plate-thrust end journal h, xrp883:thrust plate-free end, xrp883:trunnion shaft, xrp883:spring air seal cap, xrp883:spring stud brg.housing, xrp883:spring guide var-02, xrp883:spring housing cover var-02, xrp883:spring stud adapter, xrp883:spring preload stud var-02, xrp883:spring orifice plate, xrp883:journal pr.spring, xrp883:deflector blade, ref no: hy-308.0, xrp883:spring stud lock nut, xrp883:inverted cone spare, xrp883:stop bolt assembly, xrp883:upper journal housing, xrp883:lower journal housing, 50 pin scsi cable set,g/f, prefab i/o cable set,g/f, surge spprsr cn9067557145, wire wound resistor,cn9060372115, maxpac 37cond.ribb on cable assy. 84, res zero ohm 0.25w,dv0692305963, res mf 10m 1% 0.6w 50ppm,en7460190586, terminal block cbt250 ,cu7433498508, fuse base & carrier, tag boardassyly.with 5poles,d99260005501, electrnc componet:blank modules(48*24)mm, diode stud type 1400v; 95a, maxpac cable assy. 28" part no. : -d5945, ars100:valve stem, 250mw:screw cap soc pm10x20, 250mw:locking plate, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:rectangular wire 1.7x1.4, esv:piston, jacking oil system:jacking hose brg 5&6, jacking oil system:jacking oil hose brg-, xrp883:worm gear & worm shaft assy, 250mw:caf gasket, 250mw:gasket dia 1240/1172, s3, 250mw:o ring, 250mw:o ring, 250mw:gasket, esv:stud m30x150, esv:cap nut am 30, 250mw:governor impeller, 250mw:threaded bushing, over speed trip system:wheel, 250mw:clamping piece for 3l &3r, thri 108/44:sealing strip 8x2, l=750mm, 250mw:locking plate for 2l & 2r, 250mw:locking plate, insulator:bushing insulator, insulator:pin insulator, insulator:shaft insulator for esp, hnk:sealing ring (lip seal), cv & servomotor:plug with stem, gen(bhel-thri 86/35):sealing ring assy., xrp883:gearbox asy, wb-1e:complete assembly, bhel davr:pwr mdl 6qg12 3-ph 68912sss006, oil gun assy, bhel davr:pulse coupling stage mdlassy u, bhel davr:trfmr pwr 5kva 3ph ynyn0 220/4, bhel davr:res w.w 500w 5% 150r 50ppm, bhel davr:res ww 2k 5%25w pir25, bhel davr:mdl voltage level converter mo, bhel davr:distribution block 5way, colou, bhel davr:mdl 69203na1aa un0610av1, i/o, bhel davr:srg spr 150v-250v dc 3rt2916-1, bhel davr:shunt 50a/60mv; accy:0.5%, bhel davr:vm dc m

CTN :44480278

10 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of nut m16 6h 23 , nut m16 6 02 , nut impeller , nut , nut , screw bm10 6 g x25 23 14x17h2 , screw stopper , bolt m12x22 , bolt m12x24 , bolt m12x32 , connecting bolt , connecting bolt , connecting bolt , bolt , bolt , bolt , bolt , bush , bush connecting rod , bush , distance bush , bush porcelain head , pin 16x40x85 , ratchet , plate locking steel , plate stop , protector , pipe 40u 32 7 , pipe branch rescilient 125 , pipe branch rescilient 200 , pipe branch rescilient 250 , pipe branch rescilient ii 200 150x220 , pipe branch rescilient ii 125 80x160 , pipe branch rescilient ii 80 16x90 , pipe branch rescilient ii 350 240x420 , pipe , pipe connection starting servo motor tospeed governor , pipe , impeller , hose , flexible metal hose , friction block , shoe lh , shoe rh , sleeve lining , key , spring , power take off shaft sealing cup spring , spring main contact , spring , spring , spring , spring c sh p 2 ii 2 5x24x60x6 5 , spring , bearing bush , pipe dia 32 py 160 hose dia 32 pr 160

Central Government/Public Sector

CTN :44751233

13 Apr, 2026 NA

Bangalore - Karnataka

Tender For supply of material - m10, locking edge wsr, din128a-ss-a2-70, m12x40, hex hd scw, din933-ss-a2-70, m10-hex nut 0.8d-din934-ss-a2,70

Central Government/Public Sector

CTN :44760468

05 May, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of set of ms fasteners consisting of bolt, self-locking nut, plain washer and spring washer. one set consists of: 1) bolt, ms hex head m10 x 30 mm to is:1363 (part 1) - 1 no. 2) self-locking nut ms m10 to is:7002 - 1 no. 3) plain washer ms m10 to is:2016 (type a) - 1 no. 4) b10 spring washer to is:3063 - 1 no. all items shall be zinc electroplated with blue passivation. each item shall be packed separately. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44747210

15 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of locking nut m10x1.25 mm-stainless steel check nut used in assembly door mechanism to secure critical threaded fasteners against vibration. [ warranty period: 30 months after the date of delivery ]

Gi Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector