Latest gi elbow Tenders | Government gi elbow Tenders

CTN :45085351

15 May, 2026 NA

Kota - Rajasthan

Tender For supply of long nose plier , line tester , digital tester , insulation tape 25 metre , safety electrical 11kv rubber hand gloves for 11kv , safety electrical 33kv rubber hand gloves for 11kv , frp discharge rod for operation upto 33kv , screw driver , xlpe cable cutter heavy duty , digital earth resistance tester set , led torch 2200 mah battery with 4 hours backup , fire extinguisher co2 type 4 point 5 kg capacity , fire extinguisher dry, type 9 kg capacity , leather safety shoe excellent grip , lineman plier insulated al br , electrician hammer , utility knife , allen key set , hacksaw blade hss all hard , plastic tool box with organiser , electrician leather tool bag , insulation tape ht , pvc bend low level cistern , pvc waste pipe for wash basin 32mm , half stall type urinals , urinal chinaware partition , one piece ewc floor type , door stopper aluminium 100 mm , gi socket 15 mm , gi socket 20 mm , gi elbow 15 mm , gi elbow 20 mm , gi union 20 mm , gi nipple 20mm into 150mm , gi nipple 15mm into 150mm , paint olive green , synthetic enamel paint black , synthetic enamel paint white , synthetic enamel paint white 1l container , synthetic enamel paint black 4l container , pedestal bottom for chair , twin wheel coaster revolving chair , thinner , turpentine oil , touch wood polish 1l container , cp bracket with screw for curtain rods , m seal 01 kg pack , booklets

CTN :45058672

11 May, 2026 9.00 Lacs

Ludhiana - Punjab

Tender For supply of modular piano type domestic electrical switches isi marked to is 3854 (q2) , modular piano type domestic electrical sockets isi marked to is 1293 (q2) , pvc insulated copper cable single core and multi core circular sheathed with flexible conductor (v2) isi marked to is 694 (q2) , flat cable, aluminium conductor with pvc insulation and sheathed isi marked to is 694 (q2) , changeover switch 32 amp four pole off load with enclosure , changeover switch 63 amp four pole off load with enclosure , changeover switch 100 amp four pole with enclosure , led security light 35 oblique 36w ip65 isi marked , led flood light 30w ip65 isi marked , led tube light fitting 10 watt 2 ft long 6500k , led tube batten 18 oblique 20w 6500k , led light round recess surface type 18 oblique 20watt , switch socket combination piano type 5 oblique 6 amps , service wire of size 16 sqmm x 2 core isi marked 100 mtr roll , cable pvc insulated flat aluminium conductor 10 sqmm 3 core isi marked , ht insulation epr self amalgamating tape 11kv 38mm x 9 oblique 10 mtr , tape insulation 25mtr x 20mm width isi marked , heating element triangle 2 kw , capacitor oblique condenser 2.5 mfd , aluminum lugs size 240 sqmm , aluminum lugs size 185 sqmm , aluminum lugs size 150 sqmm , aluminum lugs size 120 sqmm , aluminum lugs size 70 sqmm , aluminum lugs size 50 sqmm , aluminum lugs size 35 sqmm , aluminum lugs size 25 sqmm , plug and socket in sheet metal box 01 mcb 20 amps isi marked , dol starter 25-33 amps, 415v, 3 phase isi marked , submersible pump starter 55 amps, 415v, 3 phase isi marked , gi pipe medium grade 100 mm bore isi marked , gi pipe medium grade 80 mm bore isi marked , gi pipe medium grade 50 mm bore isi marked , gi tee 25 mm , gi elbow 25 mm , gi nipple 25 mm 6 inch long , gi nipple 25 mm 4 inch long , gi socket 25 mm , gi nipple 20 mm 6 inch long , gi socket 20 mm , gi nipple 20 mm 4 inch long , nrv 80 mm , nrv 100 mm , upvc butterfly valve 160 mm , upvc butterfly valve 110 mm , upvc union 110 mm , upvc foot valve 160 mm , gm gate valve 50 mm , gm gate valve 25 mm , gm gate valve 20 mm , transformer oil di electric strength not less than 60 kv best quality , inner brass assembly for geyser 06 holes isi marked , plate 8m modular isi marked , disc type insulator 11 kv , single phasing preventer isi marked , primer paint red oxide , spn db 12 way double door isi marked , spn db 8 way double door isi marked , spn db 4 way double door isi marked , astronomical timer switch isi marked , timer relay switch isi marked , pvc junction box for street light , refrigeration gas chlorodifluora methane type cfm 22 r22 of size 1 kg cylinder , thermostate 230v for geyser 7 inch isi marked , fuse barrel 11 kv , power contactor 100-105amps 4 pole isi marked , pvc conduit pipe 1 inch dia 3 mtr length round shape isi marked , pvc casing caping 1 inch x 3 mtr long , fuse wire copper tinned 25 swg , submersible tullu water pump 18 w for desert cooler isi marked , grass pad for desert cooler standard size , indicator bulb ac 220v neon type with wire for geyser red and green isi marked , brass dead nut 3 oblique 4 inch for geyser isi standard , pin type insulator 11 kv , lower shutter for exhaust fan , adjustable nozzel 2 inch dia for swimming pool , geyser safety valve 0.8 mpa isi standard , pvc connection pipe hot and cold 18 inch isi marked , geyser inner tank steel 25 ltrs , solar heating element 3 kw isi marked , fastener 4 inch with screw for installation of geyser isi standard , pvc drain pipe 15 mm bore for ac 3 mtr long //bid details 2 / 53 15 mm bore for ac 3 mtr long

CTN :45047373

11 May, 2026 NA

Gurdaspur - Punjab

Tender For supply of bore , pvc connection with ptmt bolt and nut 15mm dia 450 mm length , waste cupling of cp coated half s steel sink 100 mm , stainless steel grating plate 125mm dia with or without hole , pvc internal kit for 10 ltr pvc flushing cistern , vitreous china wash basin 550 into 400 mm including brackets , gi union 15mm , aluminium door stopper alloy body , lock mortice 65 mm for doors , pvc stop cock 20 mm , pvc water tank cover for 1000 ltr tank , gi union 20mm , brass spindle half round for cp bib cock 15 mm , cp brass phase head for bib cock pillar cock concealed stopcock , gi tee 20 mm , jet spray cp with 1 point 2 mtr flexy tube , gi socket 20mm , brass spindle for cp pillar cock 15mm bore , pvc stop cock 15 mm ext threading , aluminium alloy anodised 125 mm long makeclassicargent , gi tee 15 mm , cp telephonic shower with 1 point 2 m tube with hose and hook , gi reducer elbow 20 mm into 15mm , gi socket 15mm , mild steel sliding bolts 300 mm long plate type , pvc water tank cover for 500 ltr , gi elbow 20 mm , cp concealed stop cock 15 mm , gi elbow 15 mm , mild steel barrel tower bolt 150 mm long , mild steel helical door springs including roller and roller plate , oil putty , gi reducer socket 20mm into 15 mm , aluminium anodised section 150 mm long , brass spindle half round for cp concealed stop cock , mild steel pressed stove enamelled black 150 mm , mild steel sliding bolts 250 mm long plate type , gi nipple 20mm into 125 mm , galvanised wire cloth mesh 0 point 56 mm nominal dia of wire , gi nipple 20mm into 150 mm , gi tank nipple 20 mm , gi nipple 15mm into 150 mm , gi nipple 15mm into 100 mm , plywood commercial 8 fett into 4 fett 12 mm thick grade bwr , gi nipple 15mm into 125 mm , gi nipple 15mm into 50mm , gi tank nipple 15 mm , towel ring brass chromium plated , gi nipple 15mm into 75mm , washer for syphone sets internal external dia of washer , aluminium alloy anodised sliding door bolt with hasp staple 250 mm long , plywood commercial 8 feet into 4 feet into 9 feet mm thick grade bwr , mild steel barrel tower bolt 200 mm long , teflon tape roll plumbing , pvc urinal pipe 40 mm dia 750 mm long flexible pipe , gi pipe 20 mm dia medium grade , plywood commercial 8 fett into 4 feet into 6 mm thick grade bwr , brass spindle for concealed stop cock , butt hinges, medium weight cold rolled mild steel 100 mm long , pvc bend pipe for superflow of flushing cistern , hex nipple 15 mm , gi plug 15mm , plywood commercial 8 feet into 4 feet into 4 feet mm thick grade bwr , mild steel mortice lock vertical type 2 levers 75 mm long with two set , vitrous china water closet seat ewc white , gi pipe 15 mm dia medium grade , aluminium alloy handles fabricated type, anodised 150 mm long , door seal with nylon brush side to of door shutter , thread roll good quality , tower bolt 125 mm long , mild steel powder coated hat and coat hook 6 nos of hook , statinless steel holder for curtain rod 25mm dia , mild steel wood screws size 19 iinto 10pack of 100 nos , mild steel full length threaded screws for iron window size n exc 15mm , mild steel cp coated hasp and staple 75 mm long , m-seal liquid , aluminium anodised, barrel tower section 200 mm long , pvc plugs for fixing screws to drill holes pack of 100 nos , sheet glass pin headed 4 mm thick. 4 feet into 4 feet , plywood commercial 8 feet into 4 feet into 19 mm , white cement shower rose 125mm joints brass chromium plated , stainless steel plate rack of size 900mm into 600mm thickness 1 mm , bib tap chromium plated 15mm dia isi marked, fancy type, angle valve cp brass 15mm bore, pvc cabinet looking mirror of size 600 into 450 mm , stop cock //bid details 2 / 82

Central Government/Public Sector

CTN :45045414

21 May, 2026 9.57 Lacs

Angul - Odisha

Tender For supply of gi pipe 2 inch , gi pipe 1 inch , gi pipe 3 by 4 inch , gi pipe 1 by 2 inch , gi flange 2 inch , gi socket 2 inch , gi elbow 2 inch , gi tee 2 inch , gi reducer 2 to 1 by 2 inch , gi reducer tee 2 to 1 by 2 inch , gate or ball valve 2 inch , gi socket 1 inch , gi union nut 1 inch , gi elbow 1 inch , gi tee 1 inch , gi reducer 1 to 1 by 2 inch , ball valve 1 inch , gi socket 1 by 2 inch , gi union nut 1 by 2 inch , gi bend 1 by 2 inch , gi elbow 1 by 2 inch , gi tee 1 by 2 inch , ball valve 1 by 2 inch , gi nipple 1 by 2 inch , pipe threading wrench set with dies 0.5 0.75 1 and 2 inch , non sparking slide wrench-is:4595 (q3)

CTN :45038461

09 May, 2026 17.21 Lacs

Fatehgadh - Uttar Pradesh

Tender For supply of health faucet (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , tower bolts (ferrous metals) as per is 204 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , block board size 8 feet x 4 feet x 18mm , ball valve 20mm ptmt , gi pipe 15mm med grade , gi pipe 20mm x 6mtr med grade , glass corner self 12 inch , oil putty , silicon sealent with gun , spindle for cp or brass stop cock size 15mm , ss butt hinges 100mm , wall putty in 20kg , ball valve 20mm upvc , beading flat 20mm , cement birla white 1kg , cp door handle 125mm , door handle aluminium 150 mm isi marked , door seal , gi elbow 15mm , gi elbow 20mm , gi long screw 15mm x 150mm with checknut and bolt , gi nipple 15mm x 100mm , gi nipple 15mm x 150mm , gi nipple 20mm x 100mm , gi nipple 20mm x 150mm , gi socket 15mm , gi socket 20mm , gi socket 25mm , gi socket reducing 20x15mm , gi tee 15mm , gi tee 20mm , gi union 15mm , gi union 20mm , ms screw wood 25mm x 6mm , ms screw wood 30mm x 5mm , ms screw wood 50mm x 8mm , m seal sealing wax , nails 25mm long , nails 35mm long , nails 50mm long , nails 75mm long , nails 100mm long , nails 150mm long , nails for beading , nails wire 17 nos , nozzle brass 15mm male thread , gi pipe 15mm med grade , gi pipe 20mm med grade , gi pipe 40mm med grade , gi pipe 80mm med grade , gi pipe 50mm med grade , gi pipe 100mm med grade , gi pipe 25mm med grade , spindle for cp brass stop cock size 15 mm , ms butt hinges 75 mm , ms butt hinges 100mm , ms tower bolt 150mm , door handle aluminium 150 mm , gi elbow 25mm , gi elbow 40mm , gi nipple 10mmx100mm , gi nipple 10mmx150mm , gi nipple 15 mm x 100mm , gi long screw nipple with one check nut and socket size 15 x 100 mm , gi long screw nipple with checknut and socket 15 x 150 mm long , gi nipple 15mmx150mm , gi nipple 20mmx100mm , gi nipple 50mmx150mm , gi nipple 25mmx100mm , gi nipple 40mmx150mm , gi long screw nipple with one check nut and socket size 20 x 150 mm , gi hex nipple 15mm , gi socket 25mm , gi socket 40mm , gi socket 50mm , gi reducing socket 20mm x 15mm , gi reducing socket 25mm x 20mm , gi tee reducer 20mmx15mm , gi tee reducer 25mmx15mm , gi tee reducer 25mm x 20mm , gi elbow reducer 25mmx20mm , gi tee 25mm , gi union 25mm , gi union 40mm , rectangular glass shelf 18 inch , screw wood steel 15 mm , screw wooden steel 20mm , screw wood steel head 25 mm , screw wood steel 35 mm , nails 1 inch , nails 2 inch , bib cock ci 15 mm , pvc float valve 25 mm complete assembly , gi tubing medium grade 15 mm dia , gi wire mesh 3 feet width x 15 mtr long , oil putty glass putty , ms butt hinges 100 mm , door stoper , door seal 1 point 2 mtr , gi elbow 15 mm dia , elbow gi 20 mm , 25 mm gi elbow , gi nipple 15 mm x 50mm long , gi nipple 15mm 150mm length , gi nipple 20mm 100mm length , gi nipple 20mm 150mm length , gi nipple 20mm 75mm length , gi socket 15 mm , socket gi 20 mm , gi union socket 20 mm , gi union socket 25 mm , socket reducer 20mm x 15 mm , gi socket reducing 25mm x 20 mm , gi tee reducer 20mm x 15 mm , gi tee equal 15 mm , gi union socket 15 mm , union gi 25 mm , m seal , nails 15mm , bracket for whb block board size 8'x 4'x 18mm , bib cock ci 15 mm, ball valve 20mm ptmt , float valve 25mm , gi pipe , glass corner self 12", gi wire mesh 3' width x 15 mtr long, oil putty , silicon sealent with gun, spindle for cp/brass stop cock size 15mm, ms butt hinges 75 mm, ss butt hinges 100mm, wall putty in 20kg, ms tower bolt 150mm , ball valve 20mm upvc, beading flat 20mm, cement birla white 1kg, cp door handle 125mm, door handle aluminium 150 mm isi marked, door seal, gi elbow, gi long screw 15mm x 150mm with checknut & bolt, gi nipple 10mmx100mm, gi nipple 10mmx150mm, gi nipple 15mm x 100mm , gi long screw nipple with one check nut & socket size 15 x 100 mm, gi long screw nipple with checknut & socket 15 x 150 mm long, gi nipple, gi socket, gi tee, ms screw,

CTN :44964766

06 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : work contract for procurment of miscellaneous items at pdh unit - work contract for procurement of miscellaneous items at pdh unit (part-a) pdh-pp project, unit site, gail-usar, alibag, raigad, maharashtra. wire rope siling 16x5 mtr wire rope siling 18x16 mtr wire roper siling 16x1 mtr blow shackle 3 ton capacity pad lock 50mm portable oven water proof tape cold zinc spray safety shoe safety helmet 6 sqmm 4 core cable 4 sqmm 4 core cable 4 sqmm 2 core cable 1.5 smm 3 core cable gum boot gi elbow 32mm pvc pipe 1" gas cutting torch oxygen regulator lpg regulator canvas delivery pipe 3" welding electrode 7018 3.15mm lifting belt stonx6mtr 25 amp 2 pole mcb welding helmet with safety helmet connector for welding machine 400 amp 16x80 mm gi bolt & nut with washer 27 * 1201 mm gi bolt & nut with washer 30x150 mm gi bolt & nut with washer 30x160 mm gi bolt & nut with washer 30 * 1701 mm. gi bolt & nut with washer 33 * 200 mm gi bolt & nut with washer 33 * 130 mm gi bolt & nut with washer 36x250 mm. gi bolt & nut with washer 33 * 260 mm gi bolt & nut with washer

CTN :44967201

06 May, 2026 145

Bengaluru - Karnataka

Tender For procurement of various drinking water supply items including pump and motor for the year of 2026-27 - dap_ 0.5 inch pvc pipe bend, dap_starter 20hp, dap_starter 17.5hp, dap_starter 15hp, dap_starter 12.5hp, dap_starter 10hp, dap_starter 7.5hp, dap_starter 5hp, dap_starter 3hp, dap_starter 1hp, dap_pump motor 20hp 40stage, dap_pump motor 17.5hp 36stage, dap_pump motor 15hp 30stage, dap_pump motor 12.5hp 25stage, dap_pump motor 10hp 20stage, dap_pump motor 7.5hp 15stage, dap_pump motor 5hp 10stage, dap_pump motor 3hp 10stage, dap_pump motor 1hp 8stage, dap_ electrical panel board, dap_ 4 inch pvc pipe bend, dap_ 3 inch pvc pipe bend, dap_ 2.5 inch pvc pipe bend, dap_ 2 inch pvc pipe bend, dap_ 1.5 inch pvc pipe bend, dap_ 1.25 inch pvc pipe bend, dap_ 1 inch pvc pipe bend, dap_ 0.75 inch pvc pipe bend, dap_ 4 inch pvc tee , dap_ 3 inch pvc tee , dap_ 2.5 inch pvc tee , dap_ 2 inch pvc tee , dap_ 1.5 inch pvc tee , dap_ 1.25 inch pvc tee , dap_ 1 inch pvc tee , dap_ 0.75 inch pvc tee , dap_ 0.5 inch pvc tee , dap_ 0.75 inch gi elbow & collar, dap_ 0.5 inch gi elbow & collar, dap_ 2.5 inch gi collar h or v, dap_ 2 inch gi collar h or v, dap_ 1.25 inch gi collar, dap_ 2.5 inch gi bend, dap_ 2 inch gi bend, dap_ 1.25 inch gi bend, dap_ 0.75 inch pvc pipe collar, dap_ 0.5 inch pvc pipe collar, dap_ 4 inch pvc pipe 1length, dap_ 3 inch pvc pipe 1length, dap_ 2.5 inch pvc pipe 1length, dap_ 2 inch pvc pipe 1length, dap_ 1.5 inch pvc pipe 1length, dap_ 1.25 inch pvc pipe 1length, dap_ 1 inch pvc pipe 1length, dap_ 0.75 inch pvc pipe 1length, dap_ 0.5 inch pvc pipe 1length, dap_ 4 inch pvc elbow, dap_ 3 inch pvc elbow, dap_ 2.5 inch pvc elbow, dap_ 2 inch pvc elbow, dap_ 1.5 inch pvc elbow, dap_ 1.25 inch pvc elbow, dap_ 1 inch pvc elbow, dap_ 0.75 inch pvc elbow, dap_ 0.5 inch pvc elbow, dap_ 2 inch gi pipe nipple 1mtr, dap_ 0.75 inch gi pipe nipple 1 feet, dap_ 0.5 inch gi pipe nipple 1 feet, dap_ 2.5 inch gi non-return valve, dap_ 2 inch gi non-return valve, dap_ 4 inch pvc pipe collar, dap_ 3 inch pvc pipe collar, dap_ 2.5 inch pvc pipe collar, dap_ 2 inch pvc pipe collar, dap_ 1.5 inch pvc pipe collar, dap_ 1.25 inch pvc pipe collar, dap_ 1 inch pvc pipe collar, dap_ 3 inch pvc joint collar, dap_ 2.5 inch pvc joint collar, dap_ 2 inch pvc joint collar, dap_ 4 inch pvc ball valve, dap_ 3 inch pvc ball valve, dap_ 2.5 inch pvc ball valve, dap_ 2 inch pvc ball valve, dap_ 1.5 inch pvc ball valve, dap_ 1.25 inch pvc ball valve, dap_ 1 inch pvc ball valve, dap_ 0.75 inch pvc ball valve, dap_ 0.5 inch pvc ball valve, dap_ 2 inch cpvc pipe 1length, dap_ 1 inch cpvc pipe 1length, dap_ 0.75 inch cpvc pipe 1length, dap_ 2 inch cpvc fta, dap_ 2 inch cpvc collar, dap_ 2 inch cpvc long bend, dap_ solvent cement 250, dap_ solvent cement 50, dap_ solvent cement 100, dap_ 2.5 inch pvc mta & fta & end cap, dap_ 2 inch pvc mta & fta & end cap, dap_ 1.5 inch pvc mta & fta & end cap, dap_ 1.25 inch pvc mta & fta & end cap, dap_ 1 inch pvc mta & fta & end cap, dap_ 0.75 inch pvc mta & fta & end cap, dap_ 0.5 inch pvc mta & fta & end cap, dap_ 1.5 inch hdpe pipe 1length, dap_ 1.25 inch hdpe pipe 1length, dap_ 2 inch cpvc valve, dap_ 1 inch cpvc union and tank nipple, dap_ 0.75 inch cpvc union and tank nipple, dap_ 2 inch cpvc union, dap_ 2 inch cpvc mta, dap_ cpvc gum 100ml, dap_ cpvc gum 29ml, dap_ 1 inch cpvc tee, fta, mta, dap_ 0.75 inch cpvc tee, fta, mta, dap_ 1 inch cpvc elbow & collar, dap_ 0.75 inch cpvc elbow & collar, dap_ 1 inch cpvc ball valve, dap_ 0.75 inch cpvc ball valve, dap_ water proof tape, dap_ 1.2 mm rewinding copper wire, dap_ pvc gate valve threaded, dap_ pvc gate valve plain, dap_ pcv tape roll, dap_ 2.5 inch pvc reducer, dap_ 2 inch pvc reducer, dap_ 1.5 inch pvc reducer, dap_ 1 inch pvc reducer, dap_ 0.75 inch pvc reducer, dap_ hdpe end connector, dap_ gm lower valve, dap_ gm upper valve, dap_ 0.75 inch gi tap, dap_ 0.5 inch gi tap, dap_ 4sqmm 4core copper

CTN :44966098

06 May, 2026 280

Channarayapatna - Karnataka

Tender For procurement of water supply pvc,upvc,cpvc materials and pump motor materials for the year of 2026-27 - volatage meter, prevender, pump motor 20hp 50 stage, pump and motore 10hp 50 stage, motor for open well 1 hp, motor and pump 7.5hp 15stage, motor 5hp 10stage pump, end connection for hdpe- iso certified, hdpe pipe 1.25 inch 20 gauge- iso certified, hdpe pipe 1.5 inch 20 gauge - iso certified, gi thread end cap 0.5 inches- iso certified, gi pipe 0.75 inches with thread- iso certified, gi coller 2 inches- iso certified, gi coller 0.75 inches- iso certified, gi elbow 0.75 inches- iso certified, gi elbow 0.5 inches- iso certified, gi tee 0.75 inches- iso certified, gi tee 0.5 inches- iso certified, gi union 3 inches- iso certified, gi union 2 inches- iso certified, gi union 2.5 inches- iso certified, motor 5.5 hp 50stage pump, motor auto starter, amphere meter, pump and motor auto starter, gi union 2 inches- iso certified, gi tap 0.75 inches- iso certified, gi tap 0.5 inches- iso certified, gi gate wall 2.5 inches- iso certified, gi gate wall 2 inches- iso certified, brass gate wall 2.5 inches- iso certified, brass gate wall 2 inches- iso certified, solvent cement gum- iso certified, gi 2 nrv- iso certified, gi elbow 0.5 inch- iso certified, gi collar 0.5 inch- iso certified, gi nipple feet 2 feet 0.5 inch- iso certified, gi nipple feet 1 feet 0.5 inch- iso certified, gi elbow 0.75inch- iso certified, gi collar 0.75 inch- iso certified, gi nipple 0.75 2feet - iso certified, gi nipple 0.75 1feet - iso certified, gi nipple feet 2 inch- iso certified, gi bend 2 inch- iso certified, axcel blades- iso certified, sealent 100ml - iso certified, gi collar 2 inch - iso certified, gi clamp set bore cap, complete panel board items, gi pipe 2 inches class b , alluminium wires 20sq.mm - iso certified, alluminium wires 16sq.mm - iso certified, alluminium wires 12sq.mm - iso certified, alluminium wires 10sq.mm - iso certified, alluminium wires 6sq.mm - iso certified, panel board - iso certified, starter 20hp - meco, starter 17.5hp - meco, starter 15hp - meco, starter 7.5hp - meco, starter 5hp - meco, submersible cabel 10sq 3 core , submersible cabel 6sq 3 core , submersible cabel 4sq 3 core , motor and pump 25hp 40 stage pump, motor and pump10hp 20 stage, motor and pump 17.5 hp 36stage, motor and pump 20hp 40 stage, motor and pump 15hp 30 stage , motor and pump7.5hp 56 stage, motor and pump 5hp 50 stage , motor and pump 12.5hp 25 stage, item name - hdpe pipes (pe100-pn6.0) 63mm dia conforming to is 4984-2016, item name - ef reducer coupler 90mm x75mm, item name - ef reducer coupler 75mm x63mm, item name - elctro fusion elbow 125mm, item name - elctro fusion elbow 110mm, item name - elctro fusion elbow 90mm, item name - elctro fusion elbow 75mm, item name - elctro fusion elbow 63mm, item name - elctro fusion coupler 125mm, item name - elctro fusion coupler 110mm, item name - elctro fusion coupler 90mm, item name - elctro fusion coupler 75mm, item name - elctro fusion coupler 63mm, item name - ef reducer coupler 125mmx110mm, item name - ef reducer coupler 110mmx90mm, item name - ef reducer coupler 90mmx75mm, item name - ef reducer coupler 63mmx50mm, item name - road cutting machine, item name - ppr fusing machine, item name - electro fusion machine, item name - hdpe mta 20mm, item name - hdpe mta 90mm, item name - hdpe mta 75mm, item name - hdpe mta 63mm, item name - ms flang 2.5inch, item name - 50mm dia air valve, item name - elctro fusion tee 125mm, item name - elctro fusion tee 110mm, item name - elctro fusion tee 90mm, item name - elctro fusion tee 75mm, item name - elctro fusion tee 63mm, item name - hdpe flange 20mm, item name - hdpe flange 90mm, item name - hdpe flange 75mm, item name - hdpe flange 63mm, item name - hdpe pipes (pe80-pn6.0) 20mm dia conforming to is 4984-2017, item name - hdpe pipes (pe80-pn6.0) 90mm dia conforming to is 4984-2016, item name - hdpe pipes (pe100-pn6.0) 75mm dia conforming to is 4984-2016, item name-cpvc gum

CTN :45038468

09 May, 2026 12.37 Lacs

Fatehgadh - Uttar Pradesh

Tender For supply of bathroom water shower (v2) (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , soap dish - case (q4) , floor drain traps (v2) (q3) , nozzle gi 15mm , nut bolt for steel window , panel pin with head , pvc lid for water tank 500ltr , pvc lid for water tank 1000ltr , pvc rubber washer for cistern , pvc rubber washer for 15mm bib tap 100 nos in one pkt , screw 20 x 5mm , screw 75mm long , screw 100mm long , screw star head black 3 or 4 inch , screw star head black 1 inch , screw wood steel head 25mm , screw wooden steel 30mm , screw wooden steel 31mm , screw wood steel 35mm , screw wooden steel 50mm , screw wooden steel 63mm , sliding door bolt aluminium 300mm , ss but hinges 75mm , ss door stoper single squate size 5 inch , ss screw diamond 1 inch , ss screw diamond 3 or 4 inch , ss tower bolt 200mm , ss waste coupling 40mm , tack cut nails , welding rod 12 inch , wooden beading half inch x half inch , cushion 40 density size 580 x 560 x 100mm , fevicol sh adhesive , nails wire half inch , nails wire 2 inch , nails wire 3 inch , screw wooden steel 40mm , termite repellent , termite repellent spray machine pressure spray machine , pvc tank lid for storage water tank , sliding door bolt al 300 mm , sliding door bolt aluminium 16 x 200 mm , sliding door bolt aluminium 16 x 250 mm , door stoppers aluminium , ss brackets for drapery rod , gi elbow reducer 20mmx15mm , gi end plug 15mm , gi tank nipple 15mm , gi tank nipple 20mm , paint white 1st grade , steel brackets for whb , ms hasp and staple steel 100 mm , ss drapery rod 20mm dia , door bottom seal aluminium , gi hex nipple 20mm , pvc syphon for llfc , golden fincals for drapery rod , hss tile cutter blade dia 105mm , pvc nylon washer for bib cock , distemper oil bound , gi plug 20mm , ss piano hinges , fevicol sh adhesive , spun yarn , gi plug 25mm , chlorpyrifos 20 percent ec insecticide , chlorpyrifos 50 percent ec insecticide , wooden knobs for cupboard small size , green blaize cloth , teak wood beading plain 25mm , touch wood , varnish , paint thinner , stop cock ci 15 mm , stop cock ci 20 mm , screw 25mm , screw 40mm , alum sliding bolt 300 mm long , ms sliding bolt 300 mm long , ms butt hinges 75 mm , uninal waste pipe with coupling , flash strip 50 mm x 10 mtr long , alum bow handle 150 mm , gi elbow reducer 20mm x 25 mm , gi tubing medium grade 20 mm dia , gi tubing medium grade 25 mm dia , gi tubing medium grade 40 mm dia , gi union 40 mm , ms end plug 15 mm , nipple barrel 15 mm dia x 10mm long , tank nipple 20mm , pvc cover for water storage tank , tank nipple 25mm , ms end plug 20 mm , pvc wall plug rawl plug gitti , teflon tape roll , wood polish pu clear gloss premium , enamel paint white gloss is 2932 , enamel paint blue gloss is 2932 , wood putty ready to use acrylic , screws assorted ss 304 zinc plated , wood adhesive waterproof pva grade //bid details 2 / 79

corporations/Associations/Others

CTN :44962037

11 May, 2026 2.10 Lacs

Haveri - Karnataka

Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - for 25 mm dia gi collar , for 32 mm dia gi collar , for 50 mm dia gi collar , electro fusion coupler 63 mm, electro fusion coupler 75 mm, electro fusion coupler 90 mm, electro fusion tee 63 mm , electro fusion tee 75 mm , electro fusion tee 90 mm , electro fusion elbow 63 mm , electro fusion elbow 75 mm , electro fusion elbow 90 mm , electro fusion reducer 90x63 mm , electro fusion reducer 75x63 mm , stainer 80 mm, m.s. flange 3 inch, cpv fta 0.5, cpve elbow brass 0.5 , compression mta 63 mm , compression mta 75 mm, compression mta 90 mm , pvc insulated cable of flat 3 core (sheathed) 1x3x1.5 sqm, sqm pvc insulated cable of flat 3 core (sheathed) 1x3x2.5, pvc insulated cable of flat 3 core (sheathed) 1x3x4 sqm, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000 3phase, ss bowl and impeller with low volt motor as per specifications,6.50 hp - 135 lpm at 110 m equals to 12 stg outlet dia - 2.00 inch , gi union 20.88.4 32 mm nominal bore , gi union 20.88.6 50 mm nominal bore , for 20 mm dia gi collar , pvc tee 180 mm dia , pvc tee 200 mm dia , pvc bend 25 mm dia , pvc bend 32 mm dia , pvc bend 40 mm dia , pvc bend 63 mm dia , pvc bend 180 mm dia , pvc bend 200 mm dia , pvc service saddles 25 mm dia , pvc service saddles 32 mm dia , pvc service saddles 110 mm dia , pvc service saddles 140 mm dia , pvc service saddles 160 mm dia , pvc service saddles 180 mm dia , pvc service saddles 200 mm dia , pvc reducer 25 mm dia, pvc reducer 32 mm dia , pvc reducer 40 mm dia , pvc reducer 140 mm dia , pvc reducer 160 mm dia , pvc reducer 180 mm dia , pvc reducer 200 mm dia , chlorinated polyvinyl - chloride (cpvc) pipe 32 mm nominal dia. , brass bib-cock 15 mm dia , brass bib-cock 20 mm dia , coconut broom stick , coir brushes , enamel paint , pvc couplers 25mm dia , dry distemper , nuts and bolts , ms flanges of 100mm dia and 8mm thick. , ms flanges of 150mm dia and 12mm thick. , pvc couplers 32mm dia , ms flanges of 200mm dia and 16mm thick. , ms flanges of 250mm dia and 16mm thick. , ms flanges of 300mm dia and 16mm thick. , providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications 2 hp 1.5kw-25 stage, electrical & automation aluminum alloy dol starter, power 4 horsepower 3phase l&t,siemens equvilent, electrical & automation aluminum alloy dol starter, power 4 horsepower single phase l&t,siemens equvilent, pvc couplers 40mm dia , pvc couplers 50mm dia , pvc couplers 90mm dia , pvc couplers 160mm dia , pvc couplers 180mm dia , pvc tee 32 mm dia, pvc tee 140 mm dia , for 20 mm dia gi elbow , for 25 mm dia gi elbow , for 32 mm dia gi elbow , for 50 mm dia gi elbow , for 20 mm dia gi bend , for 25 mm dia gi bend , for 32 mm dia gi bend , for 50 mm dia gi bend , for 20 mm dia gi tee , for 25 mm dia gi tee , for 32 mm dia gi tee , for 50 mm dia gi tee , for 20 mm dia gi socket , for 25 mm dia gi socket , for 32 mm dia gi socket , for 50 mm dia gi socket , for 15 mm dia gm gland cocks , for 20 mm dia gm gland cocks , providing and laying of warning tape / caution tape / detector tape for hdpe pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant iss with latest amendments with appurtenances., complete, size 50 mm gate valve, size 50 mm non-return valve, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm nominal dia. , chlorinated polyvinyl - chloride (cpvc) pipe 25 mm nominal dia. , medium duty gi pipe of 32mm dia , medium duty gi pipe of 50mm dia , pvc pipes of 6 kg/cm2 for 110mm(1.894) , pvc pipes of 6 kg/cm2 for 160mm(3.923) , pvc pipes of 6 kg/cm2 for 200mm(6.233) , rcc pipe np3 600 mm dia & 2.5 m long , rubber gasket sbr quality 450mm dia. , upvc pipe is 16098 sn 4 - 110mm dia , hdpe pipe grade pe80-pn6.0, 75mm , hdpe pipe grade pe80-pn6.0, 90mm , hdpe pipe grade pe80-pn6.0, 110mm , providing and fixing ms casing collar

Gi Elbow Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others