Gi Pan Tenders

State Government

Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - providing pan class="text-red-selected">gipan> pipes, supplying and packing graded gravel in bore well, development of tube well , supply and jointing three core submersible flat cables,

Tender For corrigendum : supply of deflection of curved member apparatus , shear centre apparatus , portal frame apparatus , two hinged arch apparatus , cable geometry and statics apparatus , unsymmetrical bending apparatus , bending moment and shear force apparatus , maxwell reciprocal theorem apparatus , deflection of continuous beam apparatus , slope and deflection apparatus , behaviour of column and beams apparatus , elastic properties of deflection beam apparatus , two hinged arch apparatus , analysis of elastically coupled beam apparatus , pin joint truss apparatus , analysis of redundant joint apparatus , discharge over notches apparatus , pitot tube setup , impact of jet on vanes apparatus , dipan class="text-red-selected">gipan>tal handheld water velocity meters , tilting open bed flow channel flume , automatic traffic classification and counting counter , length gauge with isi certification mark is 2386 part i , speed gun speedster iii , gopro hero camera with tripod stand , thickness gauge with isi certification mark is 2386 part i , 75 mm sieve , 63 mm sieve , 50 mm sieve , 37 point 5 mm sieve , 25 mm sieve , 12 point 5 mm sieve , 9 point 5 mm sieve , 4 point 75 mm sieve , 2 point 36 mm sieve , pan class="text-red-selected">gipan> pan and lid , 1 point 18 mm sieve , 600 micron sieve , 300 micron sieve , 150 micron sieve , 75 micron sieve , brass pan and lid , aggregate impact tester is 2386 part iv , crushing value apparatus is 2386 part iv , bitumen penetration kit is 1203 , flash point open and fire point cleveland is 1448 part 69 , ring and ball apparatus semi automatic is 1205 * /bid number : gem/2026/b/7615986 + /dated: 15-06-2026 ' ' / bid document 1 / 30

State Government

Tender For providing pan class="text-red-selected">gipan> pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of enpan class="text-red-selected">gipan>neer-in- charge. 4. 100 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying and packing graded gravel in bore well of size as per isi 4097, as amended up to date (grade a) and specification attached with this schedule of item of work. the gravel should be free from dust, dirt or vegetable matters. packing to be done from the housing pipe to the bottom of liner all around in the bore and will be placed after liner and housing pipes have been lowered and suitably clamped. thickness and size of the gravel packing will be designed and directed by the enpan class="text-red-selected">gipan>neer-in-charge strictly as per relevant isi.

State Government

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for pan class="text-red-selected">gipan>ving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for pan class="text-red-selected">gipan> fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

Tender For auction sale of depot ferrous scrap - pl no. 98417332, sc. cond. stores wt. gr.7 consisting of steel almirah, net and frame of partition wall of gs coaches, ictpn, mcb, db, jb boxes, lamp gate without burner, net frame, tool box, ms box, sickles, tin case for master role, box, locker, table, rack, chair, luggage rack, ms pipe, circuit board, el box, lamp fitting, mobile halogen spot light, ms sheet, operation trolley, foot board, mesh guard, meter box, fire extinguisher, gas cartridge, basket wire, pan class="text-red-selected">gipan> pan, oil tin, gear box, indication panel, tape measuring, bucket, hand signal lamp, rtu, iron cots [bed], karai, balti, coach luggage rack, ms ceiling frame and others similar items in sorts and sizes. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

corporations/Associations/Others

Tender For request for proposal (rfp) for consulting of municipal solid waste site to do development, processing & monitoring at na pan class="text-red-selected">gipan>dc panoli.

corporations/Associations/Others

Tender For supply, installation, testing & commissioning of complete fire hydrant system including pump house, hydrant network, fire alarm system, accessories and fire noc at na pan class="text-red-selected">gipan>dc panoli.(re-invite)

State Government

Tender For all type material tender gp piparda 2026-27 tq korpana dist chandrapur- ceramic tiles (30cm), 40mm black aggregate, 20mm black aggregate, 88mm boulders, 40mm white aggregate, 12mm black aggregate, murrum (gravel/soil mix), sand, fly ash bricks, cement (53 grade - isi), 80mm boulders, 12mm steel bars, 10mm steel bars, 8mm steel bars, 6mm steel bars, bricks, concrete mixer machine, bituminous pad (25mm, 1.2m x 1.2m), tractor rental, water tanker, excavator (jcb/tata), tipper rental (10 cu.m), shuttering/centering rental, binding wire, road roller rental (8-ton), bitumen pad, cement pipe (900mm), iron board, cement pipe (600mm), vibrator, cement pipe (300mm), mixer rental, electronic vibrator rental, vitrified tiles (600mm x 600mm), paver block (100mm), paver block (80mm), paver block (60mm), paver block (40mm), plain paver block, tiles (2' x 2'), sliding window, sliding door, paint, oil paint, upvc pipe (mm dia), solvent, pan class="text-red-selected">gipan> bend, saddle (15mm), elbow, fta (female threaded adapter), mta (male threaded adapter), water meter, primer, pvc pipe, concrete trolley rental, polythene sheet, plastic emulsion paint, oil-based brown distemper, iron mesh, iron angle, cement pole, cement pipe 400 mm

State Government

Tender For purchase of building material - cement (ppc, isi-marked, major plant, 53 grade, 50 kg/bag; trusted brands like ultratech, jk super, birla, or acc) , steel/iron (per kg): 6 mm, 8 mm, 10 mm, 12 mm, 16 mm , pan class="text-red-selected">gipan> wire (per kg) , river sand (per cubic meter; free from soil, dust, gravel, or stone impurities) , aggregate/crushed stone (per cubic meter): 20 mm, 40 mm, 10 mm, 6 mm , murrum/kopra (per cubic meter; free from soil or stone impurities) , bricks (kiln-fired, 'kumhari' size 8x4x4 inches; per thousand) , fly ash bricks (size 8x4x4 inches; per thousand) , lime powder (calcium hydroxide or slaked lime; for external use) , steel profile sheet (4x10 feet, 25 gauge/0.5 mm) , steel profile sheet (4x12 feet, 25 gauge/0.5 mm) , steel profile sheet (4x14 feet, 25 gauge/0.5 mm)

State Government

Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of enpan class="text-red-selected">gipan>neer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing pan class="text-red-selected">gipan> pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of enpan class="text-red-selected">gipan>neer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of enpan class="text-red-selected">gipan>neer in charge at sitedar spec