Latest gi pipe spares Tenders | Government gi pipe spares Tenders

State Government

CTN :43116843

18 Dec, 2025 3.62 Lacs

Mandi - Himachal Pradesh

Tender For providing connectivity from newly construted storage tank 8 nos lot, piplu galu, masin, garh, choundhar, dharkei, 1st stage nandi, 2nd stage masin various location by laying, jointing, testing and carriage of gl pipe 100 mm dia 16 rmt, cutting, weld

State Government

CTN :43116868

18 Dec, 2025 1.59 Lacs

Mandi - Himachal Pradesh

Tender For providing, laying. jointing, testing and carriage of hdpe pipe pe-63, pn 6 kgcm2 of various dia, providing and fixing of hdpe fitting of various dia and cutting and welding of gl pipe of 100 mm dia

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Corporations/Associations/Others

CTN :43050103

12 Dec, 2025 1.49 Crore

Ichalkaranji - Maharashtra

Tender For 2 .providing supplying submersible pump, and allied material for newly 107 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16

State Government

CTN :43074834

05 Jan, 2026 15.21 Lacs

Jalpaiguri - West Bengal

Tender For deployment and hiring charges of a boat mounted dredging pump assembly including reconditioned diesel engine, overhauled slurry pump, timber based floating platform with gl drum floatation, cl delivery pipe line with complete accessories, anchoring a

CTN :43036454

13 Dec, 2025 30.00 Lacs

Bhiwadi - Rajasthan

Tender For annual rate contract of supply of consumable parts required for truck mounted mechanized road sweeper machine as per enclosed specifications - cartridge filter dia-200 mm l-900,, side brush disc dia 600mm,bristle length 11 inch, central brush dia 400 mm, l-1800 mm, transperent pvc duct hose 6" - id152.4mm (5meter), rubber 40x5 mm (8meter), sponge rubber 25x25 mm (6meter), sponge rubber 40x40 mm (10meter), rubber suction hose id 250mm x length 1250mm, rubber for suction nozzle, solid tyre 10", v belt spb 89, rubber sheet 8 mm-rcv (50kg), rubber pad 44mm x 72mm x 200mm, fuse 10 amp, fuse 20 amp, hyd. oil -68 (500 ltr), sae 80w90 api gl-5, compressor oil elgi, compressor filter, strainer 1/2"-italy, filter 1/2" bsp model-hfr05-04b-149, plastic spray nozzle 3/8" bsp, pu pipe 6 mm - janatics (210meter), pu pipe 8 mm - janatics (10meter), pu joint 6 mm - janatics, pu tee 6x6x6 mm - janatics, suction strainer-sc3-030, suction strainer-sc3-040, suction strainer-sc3-100, dowty seal 2", dowty seal 1-1/2", dowty seal 1-1/4", dowty seal 1", 2213k salf aligned ball bearing-tapper, lock nut km13 (m65x2), lock washer mb13, seals for gear box, seals for hyd. motors, seals for hyd. pumps, seals for hyd. cylinders 130x120x2500 st, skf bearing grease lghp 2/1 high temperatur (2kg)

CTN :42987335

12 Dec, 2025 NA

Kullu - Himachal Pradesh

Tender For repair and restoration under rain damage lwss neoli tharman in tehsil & distt. kullu (sh:- laying, jointing and testing of gl pipe 32mm dia at tharman nallah in gp gharahan) sdf/2025/366

CTN :42987336

12 Dec, 2025 NA

Kullu - Himachal Pradesh

Tender For repair and restoration under rain damage lwss chansari seogi kinja in tehsil & distt. kullu (sh: laying, jointing and testing of gl pipe 40mm dia at kosh nallah) sdf/2025/363.

CTN :42987334

12 Dec, 2025 NA

Kullu - Himachal Pradesh

Tender For restoration of rain damages of wss lari manari and devdhar in tehsil & distt. kullu (sh;- excavation, dismantling, relaying, jointing testing of gl pipe of 40mm dia and 25mm dia in various rd's)

Central Government And Public Sector

CTN :42884913

13 Dec, 2025 4.94 Lacs

Thrissur - Kerala

Tender For supply of ei rearrangement work in thrissur ba c c - supplying and fixing of vertical type, mcb distribution board , supplying and fixing 5 a to 32 a rating, mcb single pole , supplying and fixing 5 a to 32 a rating, mcb tripple pole , supplying and fixing 4 pole 63 amps isolator , supplying and fixing of pvc conduit 20 mm , supplying and fixing of pvc conduit 25 mm , supplying and drawing of frls copper cable 3x1. 5 sq. mm , supplying and drawing of frls copper cable 3x2. 5 sq. mm , supplying and drawing of frls copper cable 3x4 sq. mm , supplying and drawing of frls copper cable 3x 6 sq. mm , supplying and making end termination with brass compression gland 3 . 5 x 25 sq. mm , supplying and making end termination with brass compression gland 3. 5 x 35 sq. mm , supplying and making end termination with brass compression gland 3. 5 x 50 sq. mm , providing and fixing 6 swg dia g. l. wire , wiring for light point, fan point, exhaust fan point, call bell point with 1. 5 sq. mm copper conductor cable group c , supplying and fixing modular switch socket 5, 6 a switch , supplying and fixing modular switch socket 3 pin 5, 6 a socket outlet , supplying and fixing modular switch, socket 15, 16 a switch , supplying and fixing modular switch socket 6 pin 15, 16 a socket outlet , supplying and fixing modules, gl box 3 module 100mmx75mm , supplying and making end termination with brass compression gland 2 x 1. 5 sq. mm , dismantling of pvc insulated and pvc sheathed xlpe power cable up to 6 sq. mm , dismantling pvc insulated and pvc sheathed xlpe power cable above 6 sqmm up to 35 sq. mm , dismantling of pvc insulated and pvc sheathed xlpe power cable above 35 sq. mm and up to 95 sq. mm , relaying and refixing of pvc insulated and pvc sheathed xlpe power cable up to 6 sq. mm , relaying and refixing of pvc insulated and pvc sheathed xlpe power cable above 6 sqmm up to 35 sq. mm , relaying and refixing of pvc ) /bid number: gem/2025/b/6920941 * /dated: 22-11-2025 & & / bid document1 / 44insulated and pvc sheathed xlpe power cable above 35 sq. mm and up to 95 sq. mm , supply and fixing of pedestal mounting type kseb energy meter board , supplying and drawing 25 sqmm abc aluminium weather proof cable , dismantling 125 amps capacity 4 pole on load change over switch with ms enclosure , dismantling the existing afd panel repeater panels , dismantling the existing old 125amps capacity lt panel , dismantling the existing sc meter panel , dismantling the existing tpn mcb db , dismantling smoke detectors or mcp or hooter ri etc with accessories , dismantling the existing life expired un servceable ac stabilser panel , reinstalling the existing 125 a ,4 pole on load change over switch , reinstalling the existing afd panel , reinstalling the existing kseb service connection meter panel , reinstalling the existing tpn mcb db , dismantling electrical wiring in metal pvc conduits for ac units, wirings , dismantling electrical wiring in metal pvc conduits for ei light power plugs , relaying existing electrical wiring in metal pvc conduits , transportation of the dismantled electrical installation accessories within 15km distance , rearranging isolating the existing terminations , supply and fixing 63 amps capacity 4 way connector , supply installation, testing and commissioning of pre-wired, bulk head light fitting , supplying and fixing of 63 amps capacity 4 pole on load change over switch , supply and fixing 2 inch dia rigid pvc pipe , supply and fixing suitable pvc coated gi stay wire , providing frame work with 40 mm x 40 mm x 5 mm ms angle iron , providing frame work with 25 x 25 x 3 mm thick ms angle iron , providing frame work with 40 mm x 5 mm ms flat iron , providing frame work with 1 mm thick coated trafford gi sheet , supply and fixing 63 amps 4 pole onload change over switch

Gi Pipe Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Corporations/Associations/Others

Corporations/Associations/Others

State Government

Central Government And Public Sector