Latest gi profile sheet roofing Tenders | Government gi profile sheet roofing Tenders

CTN :42901043

04 Dec, 2025 NA

Pune - Maharashtra

Tender For supply of augmentation of stationery and consumables store d d - modular track mounted glide access with metal cladding , laminated faced composite panel cabinet , block work storage module , aluminium framing with water proof composite finish in fluid panel , sculpted pop grid framework , fitment of flexible poly surface floor covering , fitment of contour profile illumination , in-wall fixed storage bay , recessed downcast cob fixture assembly , graphic art work surface treatment , fixture connection set with routing components , surface routing and insulation kit with accessories , protective oil based surface finish , concealed overhead air circulation 4 ton hvac module , wall rack 8ft height with full back closed 18 inch depth base and 3 inch pillar , gandola double rack , frontal end rack , wall channel rack without base wall hanging , shopping trolley 60 liters , point of issue counter 48 inch , surveillance and recording system , card tap and check out with system , visual display unit 55 inch ) /bid number: gem/2025/b/6740707 * /dated: 24-11-2025 & & / bid document1 / 23

State Government

CTN :42858861

02 Dec, 2025 8.57 Lacs

Idukki - Kerala

Tender For renovation and repairing of valve house building and connected structures of panniar hep-repair of damaged wall plastering, reclaiming of doors and windows,painting ,repairing damaged drainage systems and providing gi profile sheet roofing over roof

CTN :42863482

28 Nov, 2025 6.51 Lacs

Chandigarh - Chandigarh

Tender For repair and replacement of public health fixtures accessories and all other items in house no 20 type 6 sector 7 chandigarh (2216 np (p) maintenance and repair - excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m dsr 2.10, all kinds of soil. dsr 2.10.1, pipes, cables etc. not exceeding 80 mm dia. dsr 2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia dsr 2.10.1.2, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : dsr 6.4, cement mortar 1:4 (1 cement : 4 coarse sand) dsr 6.4.1, providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : dsr 17.3, w.c. pan with isi marked white solid plastic seat and lid dsr 17.3.1, providing and fixing wash basin with c.i. brackets, 15 mm dia cp brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: dsr 17.7, (a) white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer dsr 17.7.3, providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.dsr 17.8, providing and fixing white vitreous china water closet squatting pan (indian type) : dsr 17.13, orissa pattern w.c. pan of size 580x440 mm dsr 17.13.2, providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. dsr 17.19, 10 litre (full flush) capacity-white dsr 17.19.1, providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings as dsr 17.28, 32 mm dia : dsr 17.28.1.1, providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. dsr 17.60, 100 mm inlet and 75 mm outlet dsr 17.60.2, sand cast iron s&s as per is- 3989 dsr17.60.2.1, providing and fixing g.i. pipes complete with g.i. fittings and clamps,i/c cutting and making good the walls etc. : dsr 18.10, internal work - exposed on wall, 15 mm dia. nominal bore : dsr 18.10.1, 20 mm dia. nominal bore : dsr 18.10.2, providing and fixing of forged brass / gm gate valve, size 20mm i/d dsr 18.17.1a, providing and fixing uplasticised pvc connection pipe with brass unions : dsr 18.21, 45 cm length : dsr 18.21.2, 15 mm nominal bore : dsr 18.21.2.1, providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) : dsr 18.46, 15 mm nominal bore : dsr 18.46.1, 20 mm nominal bore : dsr 18.46.2, providing and placing on terrace (at all floor levels) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr 18.48, providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : dsr 18.49, 15 mm nominal bore. dsr 18.49.1, providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 69

CTN :42885196

02 Dec, 2025 NA

Port Blair - Andaman And Nicobar Islands

Tender For supply of injections - dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :, of area 3 sq. metres and below, dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead., dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :, of sectional area below 40 square centimetres, providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/ chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). note: for wpc solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., frame size 65 x 100 mm, providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including isi marked aluminium butt hinges of required size with necessary screws inluding, panelling , all complete as per direction of engineer-in-charge., 30 mm thick superior hard neem wood red colour (without white) category-ii chemically treated, providing and fixing factory made upvc glazed/wire mesh windows/ doors comprising of lead free upvc multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for series r1 and r2 profiles and 2.10 mm for series r3 and r4 profiles conforming to en: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per cpwd specification, upvc extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, epdm gasket, hardware, ss 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide pa6 grade sleeve for fixing frame to finished wall as per is 1367 : part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to cpwd specification & direction of engineer-in-charge. section of steel reinforcement and cross sections of upvc profiles to be as per design approved by engineer-in-charge. wire mesh / glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to is: 3548 & is: 16231 shall be paid separately. note:- structural design proof checked from a government engineering institute,

Central Government/Public Sector

CTN :42738245

29 Nov, 2025 90.0 Thousand

Dehradune - Uttarakhand

Tender For corrigendum : -repair and overhauling service - as per bid document; as per bid document; yes; buyer premises; renovation & repair work of kiln-1 supply and fitting three phase wire connecting the main panel and three phase electric motor. 01 length as per requirement. 2 supply,fitting and wiring of - (i)isolator 01 (ii) mcb s seprate for each electric equipment. as per reqirement (iii) motor starter 01 (iv) pid s for temperature and humidity sensors etc. 01 each (v) switch for changing the direction of three phase motor. 01 contector setup 3 repairing and servicing of there phase 7hp motor. 01 4 supply and fitting with wiring of 2-3 kw electric finned heaters inside the kiln. 10 5 supply and fitting of heat/ humidity proof light in the kiln. 04 6 supply and fitting of heat and humidity sensors in the kiln 02 each 7 repairing of humidifier. 01 8 supply and fitting of wall mounted fans with its wiring. 06 9 supply and fitting of led tube lights with its wiring. 06 10 supply and fitting of doors with door frame 02 11 supply and fitting of water pipe line connecting humidifier to the water tank. 01 length as per requirement.

State Government

CTN :42844862

28 Nov, 2025 NA

Anand-Guj - Gujarat

Tender For work including materials and labor for the pavilion and decorations for the upcoming 68th convocation ceremony of the university- steel dome mandap 60 ft x 150 ft (stage area water proof) good quality white and saffron color combination of cloth as well as backdrop and swing along with materials, labor and crane work (color of ceiling and stage cloth to be approved) (height approx. 25 ft) , construction of a good quality pavilion including a pavilion and pillars (color of fabric to be approved) (height 15 feet) , work of flooring with green net on the road as per requirement (only labor work will have to be paid after reading condition number-12) , high quality materials will be used in the work, including a 10 ft x 10 ft plywood platform, side, ceiling, and 01 center teepee and single-seated sofa with cross bracing under the platform next to the green room stage. , partition work including cloth (road, pavilion and stage etc.) (height 7 feet - including wooden support and pipes) , a 5 ft x 5 ft 4" / 6" high platform with red carpet and other finishing touches for his excellency the governor at bhaikaka library , the work of creating and erecting an attractive main entry gate (box gate) including fabrics and other decorations , road barricading, railing, partition wall construction work , pedestal fan operation including fittings (heavy duty high speed pedestal fan) , led flood light operation including fitting , fitting and arranging of dining table round, top cover, swing and other decorations. , steel back weight chair (for dining table) with cover and decorative materials, fitting and arranging work. (date 14/15/2025) , iron and wooden tables for degree distribution, 02 chairs per table , along with the work of fitting and arranging the materials. (date 14/15/2025) , pvc handle chairs supplied and arranged (cleaned) , stage red carpet / ramp red carpet (for stage) including steps , camel/green color net flooring (humanities as well as road/entry) , 10' x 5' table / platform for audio system / led screen , 2 seater leather sofa supply and assembly included , red carpet (10 feet wide) at humanities patangan, guest house and bhaikaka library

Central Government/Public Sector

CTN :42742530

04 Dec, 2025 NA

Udhampur - Jammu And Kashmir

Tender For provision of certain bathroom near army hill, briefing hall, iron grill at various placess, tin shed at main guard room, heat pillar and water dispensar, 100 kva isolation transformer at los building, split ac, flame proof motor and allied work for p

State Government

CTN :42808720

28 Nov, 2025 NA

Anand-Guj - Gujarat

Tender For work including materials and labor for the pavilion and decorations for the upcoming 68th convocation ceremony of the university- steel dome mandap 60 ft x 150 ft (stage area water proof) , construction of a good quality pavilion including , including a 10 ft x 10 ft plywood platform, side, ceiling, and 01 center teepee and single-seated sofa with cross bracing , partition work including cloth (road, pavilion and stage etc.) , a 5 ft x 5 ft 4" / 6" high platform with red carpet and other finishing , work of creating and erecting an attractive main entry gate (box gate) including fabrics and other decorations , road barricading, railing, partition wall construction work , pedestal fan operation including fittings (heavy duty high speed pedestal fan) , led flood light operation including fitting , fitting and arranging of dining table round, top cover, swing and other decorations. , steel back weight chair (for dining table) with cover and decorative materials, fitting and arranging work. (date 14/15/2025) , work of fitting and arranging iron and wooden tables with 02 chairs per table along with materials for degree distribution , pvc handle chairs supplied and arranged (cleaned) , camel/green color net flooring (humanities as well as road/entry) , 10' x 5' table / platform for audio system / led screen , 2 seater leather sofa supply and assembly included , red carpet (10 feet wide) at humanities patangan, guest house and bhaikaka library

Gi Profile Sheet Roofing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government