Get complete information related to latest Gi Sheeting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Gi Sheeting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Gi Sheeting Tenders.
Tender For supply of 13 pin uic coupler, plug assembly consisting of 1.62 meter cable with polyamide hose & uic plug on both ends round type similar to schaltbau make as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev.-2. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of 2 conductor through terminal block of size 6 sq. mm, center marking for din 35 rail, as per the wago make catalogue no. 282-901 with end and intermediate plate 2 mm thick and grey colour as per wago catalogue no. 282-325. acceptable makes as per the rdso modification sheet no rdso/pe/ms/ac/0095-2024 rev (0) - wago, weid-muller, phoenix, connectwell only. [ warranty period: 30 months after thedate of delivery ] ]
Tender For roof mounted ac package unit(rmpu)for lhb eog ac in coach sets consisting of rmpu (with r407c refrigerant)02nosµprocessor controller unit 01no,rdso/pe/spec/ac/0061-2005,rev-2,type-1,with bellow duct mode of meta aramid/para aramid fabric with silicon rubber coating on both sides to spec no.rdso/pe/spec/ac/0197-2020 (rev-0),with drg rdso/pe/sk/ac/0069-2004,rev-3 with rcf alt-a & rdso modification sheet rdso/pe/ms/ac/0087-2022(rev 0)(with supply air sensor only), as per drawing: special note:-bellow arrangement for return /supply/fresh air duct as per relevant rdso/rcf drg shall be preinspected by nominated inspection agency for each lot of rmpu at oems premises of bellow. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of 25kg fire extinguisher mono ammonium phosphate powder 90 stored pressure type, pressure gauge ,gross weight 76kg,empty weight 51kg,can height 1200mm,diameter 300mm,discharge time less than 30 secs, controllable discharge mechanism(squeeze grip with easy snap safety seal),range minimum 6 meters, applicable on class a,b,c and electrically started fire, can construction :deep drawn & co.,mig welded, valve construction: forging and machining ,internal coating of can: epoxy powder coating, external coating of can: expoxy polyester power coating, sheet metal thickness:4.00 mm ,is 16018 and ce approved 1year warranty with superior quality epdm rubber. hose pipe etc., including cost of supporting materials likems stand & accessories if it is fixing wall/floor/ms brackets & accessories complete as per specifications. [ warranty period: 12 months after the date of delivery ] ]
Tender For supply of retro reflective yellow sheet (for calling on signal stop ahead of this board in black colour on yellow sheet of 600 x 900 mm) to be fixed on 600 x 900 mm ms sheet 3mm thick as per rdso dr. no. sdo/s&t/calling on board/1030 dated 26.09.2025. [ warranty period: 12 months after the date of delivery ] ]
Tender For supply of sleeve for centre pivot pin unmodified as per rdso skel - 4697 item no.11 to specification steel cl-3 as per is:1875 (1992), sleeve for wag-7 locomotives as per rdsomodification sheet no. elrs/ms/0338/rev-0. (to be procured from clw approved sources only). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t
Tender For supply of modified trunion assembly for brake gear arrangement for wap4 locos to rdsos drg. no.- skel-4559 (alt.-2) (sheet no.- 1 to 4) of rdsos modification sheet no.- elrs/ms/0284(rev.-2) dt.- 17.4.2007. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For providing and supplying furniture in integrated public health lab at district hospital ferozepur civil works furniture - almirah 20 gauge sheet heavy duty made with ms sheet size 36x78x18 duly powder coated with multipurpose shelves, heavy lock superior quality, table size 6x3 made with 19 mm thick ply + 1mm sunmica with 1 side drawer and cabinet duly polished heavy locks with footrests, counter size 8x2 operate for 2 persons made with19 mm ply + 1mm sunmica with footrests and shelves for documents with one drawer for each person, waiting area chair 3 seater- supplying & placing three seater bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated with 40-60 (dft). there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 440 10 mm(d) x 405 10 mm(h) from ground. overall height shall be = 775 10 mm, overall depth = 710 10 mm & overall width = 1765 10 mm., revolving chairs long back with tilt mechanism with arm rest(leather finished, hydraulic, with five castors, nickle polish base)
Tender For supply of main compressor 1000 lpm capacity for conventional type electric locomotive as per clw spec.no.clw/es/c-34 alt-0 with driving motor mcp (make abb, crompton, bbl,sie) conforming to rdso spec. no. spec/e/10/3/08(rev) sept 95 and winding schedule to rdso mod. sheet no. elrs/ms/0294/2000 rev-0 with latest accepted offer :- elgi makes an air compressor assembly model trc1000 mn ug, with a discoupling dry type filter and higher capacity crank case as per tpl no.s07096. [warranty period: 30 months after the date of delivery ] ]