Latest gi structure Tenders | Government gi structure Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

CTN :45737971

11 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of combined 5 pin 15 amp , bell switch 5 amp , pvc switch and socket combine with board 15 by 16 amp , pvc switch and socket combine with board 5 by 6 amp , distilled water , combination plier , cutting plier , screw driver set , ceiling led light , 2 pole mcb 10 ampcomma 220 volt , 2 pole mcb 16 ampcomma 220 volt , 2 pole mcb 32 ampcomma 220 volt , 2 pole mcb 64 ampcomma 220 volt , 0point5 hp water pump , car air pressure pump , 16 amp switch , 16 amp socket , mcb 2 pole 20 amp , 4 into 7 pvc board gangbox , 12 into 12 pvc board gangbox , 4 into 4 pvc board gangbox , 6 amp socket , main switch 63 amp , cable 2 core roll of 91 mtr 6 sqmm aluminium , change over switch 400 amp 3 phase 4 pole , 200 amp cut off fuse , 200 amp 3 pole mcb , mcb 63 ampcomma 220 volt , cable 2 core roll of 91 mtr 10 sqmm aluminium , main switch 100 amp , xlpe three core 50 sq mm aluminium unarmoured power cable 1 point 1 kv , cable 2 core roll of 91 mtr 16 sqmm aluminium , earthing set meter tester , earthing wire single core 1point5 sq mm , line tester , bulb holder , red indicator light for electric board , cable 2 core roll of 91 mtr 2point5 sqmm , kit kat fuse box 3 pole , xlpe two core 50 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe four core 25 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe two core 25 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe two core 16 sq mm aluminium unarmoured power cable 1point1 kv , 100 amp 415 volt busbar chamber board with 100a four pole isolator protection , mccb 415 volt 3 phase 100 amp , mcb box 8 way , gi tubular pole 100 mm dia length 5 mtr thickness 4 mm with baseplate 250mm x 250mm as per is 2713 part 1 and part 3 , aluminium lug 50 mm , aluminium lug 10 mm , aluminium lug 25 mm , gi nut and bolt size m 10 length 50 mm full thread , charcoal , salt , earthing plate 2 feet into 2 feet into 8 mm , gi wire 6 mm , winding wire , cable tie lock belt 6 feet feet , main switch box 4 pole 3 phase 200 amp , exhaust fan 9 feet feet 30 watt , screw size 1 feet feet , bed switch size 6 amp 220 volt , batton holder 06 amp 220 volt , pendant holder 06 amp 220 volt , lighting conductor rod , hydrometer for specific gravity , drill machine set battery , change over switch 32 amp single phase 2 pole , kit kat fuse switch gears , extension board of 02 capacity , ampere meter , double core wire 8 sq mm , double core wire 16 sq mm , double core wire 25 sq mm , digital clamp meter , dc test lamp automatic circuit tester , multistrand electrical wire 2 sq mm pvc single core , tulu pump 1 to 1 point 5 hp , pvc gang box 4 into 2 , pvc gang box 2 into 2 5 pin socket 5 amp, switch 5 amp, 3 pin plug 15 amp, 3 pin plug 05 amp, modular switch board (4 switch, 1 socket), modular switch board (6 switch, 1 socket), modular switch board (8 switch, 2 socket), 1 switch + 1 socket smart switch board , 4 switch + 1 socket smart switch board , 6 switch + 2 socket smart switch board , 8 switch + 2 socket smart switch board , cable four core 10 sq mm , cable 2 core roll of 91 mtr 10 sqmm, cable 2 core roll of 91 mtr 6 sqmm , multistrand electrical wire 6.0 sq mm pvc single core, multistrand electrical wire 4.0 sq mm pvc single core, multistrand electrical wire 2.5 sq mm pvc single core, multistrand electrical wire 1.5 sq mm pvc single core, multistrand electrical wire 1.0 sq mm pvc single core, multistrand electrical wire 0.75 sq mm pvc single core, casing and caping 20 mm (length of 3 mtr), casing and caping 25 mm (length of 3 mtr), led bulb 20/24 watt, //bid details 2 / 94

CTN :45479759

02 Jul, 2026 38.22 Lacs

Vyara - Gujarat

Tender For bid to ras supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2)

Central Government/Public Sector

CTN :45725815

27 Jul, 2026 NA

Nungambakkam - Tamil Nadu

Tender For supply of 5 meter length g.i octagonal pole as per dimension top dia -70mm bottom dia-130mm section -1(section length -5000 mm ) thick -3mm base plate -200x200x12mm with four foundation boltof size m16x600 and double arm bracket 1000mm long, using 12 mm dia ss bolts of suitable length, foundation bolt type j-type, suitable foundation bolts - 4 nos, nuts per bolt - 3nos, washers - 3 nos., instruction manual,. door opening: 500 mm height from baseplate, size: 100 mm x 500 mm with gasket. with test reports, confirming to to is 2713 (for steel tubular/octagonal poles), is 875 (part 3) for wind load calculations, and is 2629 / is 4759 for hot-dip galvanizing. make:- techno tower, bajaj, surya, vipan,jindal, utkarsh or similar [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45597429

30 Jun, 2026 5.00 Lacs

Anand-Guj - Gujarat

Tender For corrigendum : supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , lighting pole or post and hardware - tubular street light poles (v2) (q3)

CTN :45583722

29 Jun, 2026 NA

Azamgarh - Uttar Pradesh

Tender For corrigendum : supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , lighting pole or post and hardware - tubular street light poles (v2) (q3)

Central Government/Public Sector

CTN :45681866

27 Jul, 2026 NA

Nagaur - Rajasthan

Tender For supply of regid bimetallic terminal connector suitable for 50 mm dia, alluminium tubular bus bar to terminal pad of 25 kv isolater/ct conforming to rdsos drg.no.re/33/p/11090 oras per drawing no. eti/psi/p/11090 or latest consisting of part no.11091 & 11092" complete with connector body and clamping piece. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45671328

13 Jul, 2026 23.95 Lacs

Kalpakkam - Tamil Nadu

Tender For revamping of gi structure for cooling coil bank ss mist eliminator and ms piping for fchd annex acv plant at mcmfcg

CTN :45691763

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , flat brushes for paints and varnishes for heavy duty (v2) conforming to is 384 (part 1) (q4) , plywood bwr grade isi marks 6mm thick 8 ft x 4 ft , plywood bwr type 12mm thick 8 ft x 4 ft , plywood commercial18 19mm thick 8 ft x 4 ft bwr , u foam 40 density 6 ft x 3 ft x 3inch , u foam 40 density 6 ft x 3 ft x 4 inch , u foam 40 density 6 ft x 3 ft x2 inch , beading 20 mm x 8 mm thickness 2nd class hard wood , beading 25 mm x 8 mm thickness 2nd class hard wood , cloth tapastry superior quality 48 inch , cloth white long cloth as per sample , plywood bwr grade isi mark 8mm 9mm thick 8 ft x 4 ft , plywood bwr grade 6 ft x 3 ft x 12 mm , ready made plb 18 19mm thick top for table dining 6 person 1500 x 900 mm , ready made leg of table dining 3 ft x4 ft with 1st class hard wood , ready made plastic seat back of chair dining , ready made plastic seat back of chair varandha , u foam 40 density 100 mm x24 inch x 21 inch , beading 20 mm x 6 mm thickness 2nd class hard wood , knob brass cp , plywood bwr type 4mm thick 8 ft x 4 ft , ready made plb 18 19mm thick top for tabledining 8 person , adhesive superior quality 1 kg , thinner , cp handle 75 mm , seat wooden frame duly caned with plastic cane for chair cba steel , aluminum sheet 1mm thick , plywood veener and decorative one side teak finish 8 ft x 4 ft x 1 point 5mm , ready made head rest for bed hard top with 1st class hard wood teak wood , ready made long side rail of table dining 3 ft x4 ft with 1st class hard wood , broom coconut sweeping , polish glossy , readymade plb 18 19mm thick top peg table 3 ft x2 ft , readymade plb 18 19mm thick top for tablecentre 900 x 450 mm , ready made plb 18 19mm thick top for table writing 1200 x 600 mm , ready made foot rest for bed hard ply top with 1st class hard wood , ready made rear leg of chair dining with 1st class hard wood , readymade front back side rail holed for canning of chairdining , readmade short side rail of table dining 3 ft x 4 ft , back wooden frame duly caned with plastic for chair cbasteel , short rail for charpoy gi pipe 32 mm dia , touch wood , tubing gi 6 ft x32 mm , u foam 40 density 50 mm x 20 inch x 21 inch , arm rest for chair steel tubular , bow handle 150mm aluminium isi marked , beading 40 mm x 6 mm thickness 2nd class hard wood , chandrus as pre sample , check nut 32mm as per sample , cloth abrassive sand paper no 100 , cloth abrassive sand paper no 180 as per sample , cloth abrassive sand paper no 60 as per sample , cloth raxine black as per sample , cloth abrassive sand paper no 80 as per sample , handle for almirah large and medium steel as per sample , readymade shortrail for bedhard plytop , hasp and stapple aluminum 75mm , kesari powder as per sample , lock for almirah as per sample for large and medium as per sample , nut with bolt and washer for chair cba steel as per sample , panel pin steel 20mm without head as per sample , panel pin steel 25mm with head as per sample , panel pin steel 25mm without head as per sample , peg aluminum as per sample , powder amber as per sample , powder rosana as per sample , ready made plb 18 19mm thick top for peg table 450 x 300mm , ready made plb 18 19mm thick top forteapoy 450 x 600mm , readymade long rail for bed hard ply top with 1st class hard wood , readymade front leg of chair dining with 1st class hard wood , rubber shoe for chair varandha as per sample , rubber shoe for table dining as per sample , s type peg 100mm alluminium as per sample , terpentine oil , thread cotton sewing size 300 mtr long , wax , wheel for revolving chair , wood primer , varnish

State Government

CTN :45669225

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to improvement and augmentation of lis bharoli phaseii 1 no tube well of 15 hp at village pant in electrical section bharoli under esd hpsebl noi jawalamukhi - steel tubular poles 10 mtr. long muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) x-arm cl 100x50x6 mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm channel iron (100x50x6 mm), length 1270 mm 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure al (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect b001 distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800 mm x (1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800 mm x 4 nos] for supporting do fuse unit & go switch x-arm [channel iron (100x50x6 mm), length: 2800 mm x 2 nos for transformer bed x-arm [channel iron (100x50x6 mm), length: 460 mm x 2 nos for supporting main channel of transformer ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos ms angle iron 35x35x5 mm), length: 460 mm x 2 nos ms angle iron 50x50x6 mm), length: 950 mm x 2 nos for bed knee bracing ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos for lt distribution box and go switch assembly ms angle iron (50x50x6 mm), length: 450 mm x 1 nos for lt distribution box and go switch assembly go switch handle supporting: [channel iron (75x40x6 mm), length:460 mm go ab switch unit (11kv, 400a, 25 κα) triple pole o/d type d.o fuse unit boq1 aluminium thimble copper thimble danger plate barbed wire lt cable 3.5 core 70 sq. mm aluminium paint. red oxide energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr lt switched capacitor 9 kvar for 25 kva dtr erection part of 11 kv ht line erection charges & transportation charges complete in all respect of 11 kv ht line erection part of 25 kva dtr erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr jguros

Gi Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government