Latest glass cutter Tenders | Government glass cutter Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45742665

10 Jul, 2026 NA

Sonitpur - Assam

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , bathroom water shower (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , soap dish - case (q4) , flexible drain hoses for wash basins/ sinks (q3) , towel ring (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , towel rail (q3) , water storage tank 500 ltrs , water storage tank 1000 ltrs , looking mirror 450 by 600mm with pvc frame , float valve brass 20mm complete with rod and ball , wire mesh ss 1 pt 2 m wide 15m long , cp paper roll , olive green paint , weather coat primer , black paint , flash strip self adhesive 100mm by 1mtr , curtain bracket decorative type , rubber gasket with almn body snake guard for door 1 mtr long , hydraulic door closer , brass peg set of six , cement ppc 50 kgs , ss curtain rod size 24 25mm 10 ft long , door handle aluminium 150 mm , self adhesive app membrane 3 mm thick , oil putty , pvc connection 15 by 450mm , sliding door bolt 300 mm aluminium , pvc swr tee 75mm , pvc float valve 25 mm bore incl balls , grating cp 125mm , tower bolt aluminium 150mm , floor drain tapes grating pvc 100mm , tank cover of 500 ltr , ms hinges 100mm , rubber washer for flushing cistern incl balls , hasp and staple 75mm , cpvc 20 by 15 inch brass socket , pvc connection 15 by 600mm , door stopper 100mm long , cpvc tank connector 25 mm , cpvc 25 by 20 inch fabt , elbow gi 15 mm isi marked , tower bolt almn 100 mm , cpvc fabt 25mm , tee reducer gi 20 mm to 15 mm isi marked , gi elbow 20 mm isi marked , helical door spring 200 mm , cpvc 25 by 20mm brass mabt , ms hinges 50mm , cpvc mabt 25mm , cpvc brass elbow 25mm , m seal , cpvc 20mm mabt , white cement , drill bit 6 mm , but hinges 75mm , oil bound distemper , cement based paint , cpvc fabt 20mm , gi tank nipple 25mm , cpvc 20 by 15mm brass mabt , brass spindle 15 mm for stop cock , taflon tape , brass spindle 15 mm for bib cock , glass shelf 600 mm , cpvc brass socket 20mm , aluminium door handle 100 mm , cpvc brass elbow 20 mm , cpvc elbow 20 mm bore , glass cutter , cpvc tank nipple 20mm , pvc connection pipe 900mm , urinal waste pipe 32mm , aluminium tower bolt 75mm , nails 3 inch , nails 2 inch , cpvc reducer socket 20 by 25 mm , nails 1 inch , hacksaw blade 2 pt 5mm thick , aluminium handle 75mm , cpvc socket 20mm , stop cock brass concealed 20 mm , tower bolt almn 200mm , cpvc brass tee 20 by 15 mm , cpvc gate valve 25 mm , cpvc gate valve 20 mm , pvc swr pipe 40 mm , pvc swr elbow 40 mm , pvc swr tee 40 mm , wash basin anchor fastener size 8 mm , wash basin anchor fastener size 10 mm , cpvc pipe 25 mm , cpvc pipe 20 mm , brass spindle for concealed stop cock length 3 inch , brass spindle for concealed stop cock length 2 pt 5 inch , brass spindle for concealed stop cock length 2 inch , brass spindle for concealed stop cock length 1 pt 5 inch , long bend pipe for flushing cistern //bid details 2 / 93

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

CTN :45467800

01 Jul, 2026 NA

Lohit - Arunachal Pradesh

Tender For bid to ras supply of wooden scantling 3 inch x 2 inch x 12 feet long , wooden scantling 3 inch x 3 inch x 12 feet long , wooden beading 2 inch x 0.5 inch x 12 feet long , plain toughened glass 300 millimeter size 4 feet x 4 feet x 4 mm , gi wire 3 mm , pu glossy , pu sealer , pu thinner , wire mesh 4 feet width 15 m long , wire nail 4 inch , wire nail 5 inch , pannel pin 1 inch , pannel pin 1.5 inch , dendrite adhesive , looking mirror with frame 18 inch x 24 inch x 3mm thickness , glass cutter , circular blade 10 inch for wood cutter machine , sharpner stone , king machine planner blade 12 inch long , king machine hole bit 12 mm , 5 inch sanding disc pad , thinner , paint po red , paint sky blue , wood primer , paint white , paint black , og paint , paint smoke grey , paint golden brown , red oxide , floor guard exterior paint colour brick red , distemper white , wire brush , painting brush 5 inch , painting brush 4 inch , painting brush 3 inch , lime , geru , fevicol ddl , bib cock steel 15mm , gi gate valve 25 mm , gi gate valve15 mm , bib cock plastic 15 mm , m seal , stop cock steel 15 mm , teflon tap 1 by 2 inch x 10 mtr , gi socket 15mm , gi socket 25 mm , gi bend 1 inch , gi elbow 1 inch , gi elbow 15mm , gi nipple 15mm x 2 inch long , gi nipple 25mm x 4 inch long , gi nipple 15mm x 4 inch long , gi nipple 25mm x 2 inch long , connection pipe for geyser , health faucet , waste pipe for urinal , waste pipe for kitchen sink , gi tee 15 mm , gi pipe 15 mm 6mtr long , gi pipe 25 mm 6 mtr long , wc european type complete set , ewc seat cover , hexa blade , wash basin coupling , floor jaali , gi union 15 mm , gi union 25 mm , led bulb 18 watt , led bulb 12 watt , pvc insulated copper wire single core 1.0 sqmm 90 mtr roll , pvc insulated copper wire single core 1.5 sqmm 90 mtr roll , pvc insulated copper wire single core 0.75 sqmm 90 mtr roll , pvc insulated copper wire single core 2.5 sqmm 90 mtr roll , service cable aluminium 2 core 10 sqmm 100 m roll , led tube light complete set 20 watt , switch socket combined 16 amp , mcb 63 amp 2 pole , mcb 32 amp 2 pole , insulation tape 25 mtr , fan capacitor , fan regulator , fuse kit kat 63 amp , socket 6 amp , switch 6 amp , ceiling fan 1200mm , casing capping 1.5 inch x 7 feet , exhust fan 300 mm , aluminium service wire 4 sqmm 100m roll , conc drill bit 6 mm , conc drill bit 4 mm , wall putty , flexible gardening pipe 1 inch 30 mtr long , electric planner machine , ac sheet 4 feet x 4 feet , copper earthing plate size 2 feet x 2 feet x 3mm with nut bolt , copper strip size 3mm x 15mm x 8 feet , tiles 300mm x 300 mm , clothes hanger steel 2 feet long , float valve 1 feet complete set , barbed wire 2 pt 5 to 4 mm , 3 pin plugtop 6 amp , 3 pin plugtop 16 amp , curtain rod 1 inch , white washing brush 8 inch long , gi reducer 25mm by 15mm

CTN :45716962

18 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of plywood , mcb , mild steel loop holes size 900x450mm with all fitiing , ms door , ms loop hole with shutter , ms prefabricated steel door , ms single bunk bed with ply cushion , ms steel ladder , nut and bolt for srt , office table big , oil bound distemper , paint brush , pc cable 6 sqm 2 core copper , pbs roll , peg stay 6 hooks , pendent holder , pipe 40 mm 20 ft long , pillar cock , pit cover for lc , plywood 9mm 6ftx3ft , pp gi 10ft long green colour , pp gi sheet 12ft , punch tape , pvc bd 8 x 10 inch , pvc bd 6 x 4 inch , pvc cable 2 core copper , pvc cable 10 sqmm 2 core aluminum , pvc chair with arm , pvc pipe 3inch , pvc door , rectangle pipe 2inch x 1inch , pvc reducer socket 1inch x 3inch , round up , sand , scatling , septic tank cover , shover , sleeping double bunk bed cushion , sliding bolt 10inch , soakage pit cover , soap disc , socket 4inch for pvc pipe , solution for pvc , srt 10ft , stainless steel hand wash basin with frain pipe and waste coupling , stainless steel dispenser , steel but hinges 3inch door hinges , starter 3 phase , steel door size 900 x 1800mm with all fittings , steel ladder , steel locker size 770x600x950mm , steel window , steel sink , stop cock , switch 5 amp , switch 5 amp comb , switch socket 15 amp , syntex stand , tab , tarpin oil , tefflon tape , table rod complete set , thinner , toilet seat cover , towel rod , tower bolt , u clip 25 mm , urinal port with waste pipe , union 1 inch , ventilator size 450x300 , non skid vetrified tiles 2ft x 2ft , wall mounting fan , wash bain piller cock , waste pipe , water camper stand , water proof plastic , water storage tank , welding rod , wc seat , white cement , wire mesh 4x20ft , wire 3 core 10sqmm , window rain protector , wire t c 16 sqmm , wooden board 8x8x2 , wk station table , wooden primer , wooden cabinet , cement opc 43 grade , hdpe film 500 micron , ceramic wash hand basin with all fittings , bib tap , pvc low level cistern 10 ltr capicity , cgi sheet 8ft , srt 8ft , 4mm clear acrylic sheet in lieu of glass for window , glass putty , pvc copper wire , ppgi sheet 6ft , plywood 8ft x4ft 12mm thick , 100 mm thick machine pressed interlocking paver block , pcc bricks , false ceiling tullu pump, 16 amp switch , 4 inch dia pvc plastic pipe, 5 amp s socket , aggregate , air filter , aluminium door , aluminum door closure, angle holder, bib cock brass, binding wire, black fill compound , paint, bow handle, brass rod, camper stand , celling fan , celling light , ceramic non skid tile 1ft x 1ft, cgi sheet 10ft, chair plastic , chair revolving, change over switch 32 amp, cloth hook, cob garden light, colour coated sheet 1ft long , concertina coil, concrete block , coolent , cp hose pipe , cpvc elbow 1inch, cpvc nipple 1inch, cpvc pipe 1inch, cpvc socket 1inch, cpvc tee 1inch, cpvc union 1inch, cutting disc 4inch, door rain protector , door stopper , double bunk bed , earthing set , elbow 4inch for pvc pipe , entrance canopy with cgi sheet fitted , exhaust fan, false ceiling 2ft x 2ft, fan belt, fan capacitor , fasterner , fire extinguisher 2 kg, flexible pipe 2 inch, flexible pipe 20mm, floor tiles of size 11inch x 11inch, flush tank pvc with complete, fly proofing door aluminium, fuel filter element, fuel pipe , gang box, gate valve, geyser 3 ltr, gi elbo , gi elbo , gi pipe 20 ft long, gi union, gi pipe socket, gi pipe union, gi pipe 20 mm socket, gi pipe socket, gi pipe union, gi pipe socket, gi socket, glass pane , hdpe can 35 ltr, hand jet spray, hdpe sand bag, hot and cold pipe 450mm, hexa blade, indian toilet seat, insulation tape, ismb, inverter led bulb, karandi, j hook angle small, ismb , ldpe film 130ft x 18ft, led bulb 15 w, led bulb 9 w, led security light 33 w, led tube light //bid details 2 / 141

CTN :45704771

06 Jul, 2026 NA

Imphal - Manipur

Tender For supply of welding protection glass , lockiconorganizationlockpinkiconsign in to unlock| send me onwhatsappmail|wishlistexport9days leftdrill bitssaw bladestapping screwscarbon brushwelding glasst for name plate , drill bit two in one , drill saw carbon bush , hanging clip name plate , wall role plug 2 inch , small jig saw blade , saw blade 9 inch , tapping screw 1 inch to 2 inch , black screw 1 inch to 3 inch , rubber wood 8 x 4 x 12mm , glass cutter , adhesive for wood , abio tape , fax kwik , iron bit 1 inch to 4 inch , sanding seller , welding holder , drill bit iron dual 2mm to 8mm , pop rivet top head aluminum

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

State Government

CTN :45696572

01 Jul, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45673274

15 Jul, 2026 34.70 Lacs

Cachar - Assam

Tender For supply of digital vibration tester , electric tester 220v , glass cutter , multimeter , clamp meter , vehicle electrical circuit tester , battery regulator tester , bty bt 780 test analyser 12 or 24v

Central Government/Public Sector

CTN :45702760

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand,castiron tems,girder base with concrete adhearings,gearset,grill,vcb panel boxes,gipipes,nuts and bolts,angles,rails,panel boxes,fissureplates,wheels,cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: (1)behind a row bin 3&4, (2)near old e-ii ward annexe

Glass Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector