Latest glass cladding Tenders | Government glass cladding Tenders

State Government

CTN :45744619

06 Jul, 2026 59.21 Lacs

Ahmedabad - Gujarat

Tender For construction, addition and alteration work in auditorium building at gujarat high court at ahmedabad. (extension of first floor by providing light weight roofing, fabrication work, glass cladding, painting, waterproofing, fixing tiles and miscellaneous civil work in auditorium building.)

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Central Government/Public Sector

CTN :45505669

29 Jun, 2026 12.50 Lacs

Chittorgarh - Rajasthan

Tender For bid to ras bid to ras supply of air wick , air wick freshner spray , white cement 1kg pack , urinal cubes , society flag 6x4 ft , society flag 4x3 ft , colin , phenyl white , thinner oil , nylon wire 100 mtr , tap go wheel for brush cutter , grinding wheel stone cutter , pencil cell aa , pencil cell aaa , distilled water , all out refill , screw 35 8 , acid , ghadi surf , mop refill unique , mop set unique , self drilling screw 1 2 , self drilling screw 1 , fawda with iron handle , genthi , khunt , table cover 8x4 inch cloth , hit spray , grinding wheel wooden cutter , hand gloves technical work , broom large , window pan glass , glass silicon , bamboo stick , reza cloth , anchor bolt , nut bolt shrub master , napthelene balls , welding rod , paint red 4 ltr pack , paint white 4 ltr pack , paint black 4 ltr pack , paint brown 4 ltr pack , paint golden brown 4 ltr pack , screw 25 6 , screw 19 6 , screw 38 6 , wooden moulding beading 1x3 4 , wooden beading 35x12 , wooden beading 22x12 , wire gauge , hand chisel 1 2 , nails 10 type , hand chisel 1 4 , jamboor plier 12 inch , water level measuring tool , fevicol , grinding wheel , grinding wheel 60 no , grinding wheel 80 no , plywood 12mm 8x4 , plywood 19mm 8x4 , curtain patti , curtain bracket , screw driver set taparia 840 , taparia plier 7 inch , safety shoes no 09 , hammer , crc spray , iran kabja 4 inch , rivets all size aluminium , welder face mask black mirror , ss pipe 1 inch , square pipe 1 inch , hammer drill bit all size , bit all size , ss welding rod , welding holder small size , cloth stand iron wire , right angle , abro tape , plastic paints , distemper white , distemper 8524 , tera cota 4 ltr pack , paint grey 4 ltr pack , 3 core wire 2 point 5 mm , fm 01 timer , bulb holder , door bell , pvc tape roll , pvc gang box 1 plus 1 , pvc gang box 2 plus 2 , pvc gang box 16 amp , three pin top 16 amp , three pin top 6amp , socket 6 amp , switch 6 amp , aluminium lugs 25 mm , aluminium lugs 35mm , aluminium lugs 50mm , aluminium lugs 70mm , connector 32 amp lnt , led bulb 7w , led light 30 w , led flood light 100 w , aluminium cable 6mm , aluminium cable 10mm , drill bit 8mm to 16mm set , wire 0 point 75 mm 2 colour , wire 1 mm 2 colour , wire 1 point 5mm 2 colour , wire 2 point 5 mm 2 colour , wire 4 mm 2 colour , exhaust fan , mcb 4 pole 63 amp , mcb 4 pole 32 amp , mcb 6 amp 1 pole , mcb 10 amp 1 pole , mcb 16 amp 1 pole , mcb 25 amp 1 pole , water tap cp , gi nipple 1 2 2 inch , gi nipple 1 2 4 inch , gi axe nipple 1 2 , gi nipple 1 4 inch , gi nipple 1 6 inch , gi union1 2 inch , gi union1 inch , gi socket 1 inch , gi socket 1 2 inch , gi elbow 1 2 inch , gi reducer 1 1 2 , gi sintex tank nipple , gi socket 2 inch , gi tee 1x1 , gi plug 1 2 inch , teflon tape , pvc solvent , cpvc elbow 1 2 inch , cpvc socket 1 2 inch , cpvc mta 1 inch , cpvc fta 1 inch , m seal , pillar cock head half turn , water tap waisher big size , lead connection waisher , pvc pipe 4 inch for 10 feet each , flush valve waisher , lead connection pipe 2 feet , zoloto handle valve 1 2 inch , zoloto handle valve 1 inch , cana flex pipe 2 inch , cana flex pipe 1 2 inch , showel with dori , pvc hose nipple , iran pipe clip 2 inch , hdpe pipe 1 1 2 , cpvc pipe1 2 10feet each pipe //bid details 2 / 114

CTN :45694806

16 Jul, 2026 NA

Kolkata - West Bengal

Tender For tender for supply of tender for the job of modification of admin building at durgapur lpg plant -dismantling brick masonry or reinforced brick masonry , dismantling of existing old deteriorated plaster , dismantling doors , windows partitions including chowkhats architrave holdfasts complete and stacking , providing 15-20 mm cement plaster of specified mix , providing and wiring wire pvc pipe gi box switch socket , providing and fixing modular switch socket , providing and fixing 15w led panel light , providing & fixing 9 6w led spot cob light , providing and fixing made out of 8mm thick float clear glass , providing and fixing 12 mm thick gypsum board with gi channel , supplying and placing in position of location incharge table , providing and fixing of bwp 710 grade ply , providing and fixing of bwp 710 grade ply using 19mm for framework and shelves , providing and fixing of bwp 710 grade ply using 19mm for framework and shelves , providing & fixing 3 inches thick solid partition for made up of 18 gauge 50x25 mm aluminium section , providing and fixing fully glazed door shutters , floor spring installation with glass door. , supplying fitting & fixing of centre table , supply and placing in location fully upholstered sofa , scrapping and removing the existing loose paints scales cleaning the surface thoroughly , decorative wall fluted mdf panelling , supplying fitting & fixing of window blinds as approved make , supplying fitting & fixing of wall fan , supplying fitting and fixing of logo of bpcl , dismantling of existing old deteriorated plaster , dismantling doors , windows partitions including chowkhats architrave holdfasts complete and stacking , providing 15-20 mm cement plaster of specified mix , providing and wiring wire pvc pipe gi box switch socket , providing and fixing modular switch socket , providing and fixing 15w led panel light , providing & fixing 9 6w led spot cob light , providing and fixing made out of 8mm thick float clear glass , providing and fixing 12 mm thick gypsum board with gi channel , supplying and placing in position of workstation table , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing & fixing 3 inches thick solid partition for made up of 18 gauge 50x25 mm aluminium section , providing and fixing fully glazed door shutters made out of 12mm thick toughened clear glass , floor spring installation with glass door , supply and placing in location fully upholstered sofa , scrapping and removing the existing loose paints scales cleaning the surface thoroughly , supplying fitting & fixing of window blinds as approved make , supplying fitting & fixing of wall fan , dismantling brick masonry or reinforced brick masonry , dismantling doors windows partitions , providing 15-20 mm cement plaster of specified mix , providing and wiring wire pvc pipe gi box switch socket , providing and fixing modular switch socket , providing and fixing 15w led panel light , providing and fixing made out of 8mm thick float clear glass , providing and fixing 12 mm thick gypsum board with gi channel screw pvc tape , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing & fixing 3 inches thick solid partition for made up of 18 gauge 50x25 mm aluminium section , providing & fixing 12mm thick toughened glass partition with high quality aluminium profile , providing and fixing fully glazed door shutters made out of 12mm thick toughned clear glass , floor spring installation with glass door , scrapping and removing the existing loose paints scales cleaning the surface thoroughly , supplying fitting & fixing of wall fan

State Government

CTN :45642759

08 Jul, 2026 50.32 Lacs

Kota - Rajasthan

Tender For tender for providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , tender for esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , tender for pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , tender for ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , sitc 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2) //bid details 2 / 54

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

CTN :45252384

20 Jun, 2026 36.91 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of constr of amn pd of size 2.4m x 2.4m , soak pit of size 1.0m x 1.0m , quick setting compound , hydrophobic poreblocking ingredients , manufactured sand , aggregate 20mm. , aggregate 40mm. , aggregate 63mm. , pcc soild blocks size 400mm x 200 mm x 200 mm , integral water proofing compound , mild steel tmt bars 08 mm di , ms binding wire , ply wood 2.00m x 0.30m and 12mm thick , ply wood 10 mm , ismb conforming size 150 x 75mm , ismc size 75 x 40mm , 5mm thick ms plate , 4 nos x 16mm dia 100mm long foundation bolt , steel roofing trough 2000x613x180mm , hdpe sand bag of size 75x40 cm , pbs roll , ppgi sheets 3270 x 1000 x 0.60mm thick , 3.00 m long rectangular hollow section of size 66x33x2.90 , 2.30m long rectangular hollow section size 66 x 33 x 2.90mm , 150mm long ms angle of size 50x50x6mm , self taping screw 80mm , silicone gel sealan , bitumen for filling of expansion joint , hdpe sheet , prefabricated steel loop hole size 600mm x450mm , prefabricated steel door size 900mm x1800mm , ms rack of size 1.22m x 0.61m x 1.65m , pre fab welded door ismc 200 x 75mm , pre fab welded window loop hole , common burnt clay building bricks , synthetic enamel pain , red oxide primer , oil bound distemper , polyurethane thinner , chalk white , cement base paint , bricktrowel , drop forged high grade , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot-forged carbon steel powrah , high quality heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch , transparent flexible pvc water leveling tubes , heavy duty combination cutting pliers , non metallic fiberglass measuring tape 15 mtr , heavy duty crow bar 5 feet , wooden flat , prefabricated gel earthing electrode of pipe , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip size 25mm x 3mm 9.00m long , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade 40mm dia, 6 mtr long , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45307467

20 Jun, 2026 45.05 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of constr of fighting pd of size 2.4m x 2.4m , soakl pit size 1.0m x 1.0m , steel loop hole size 610 mm x 330 mm , prefabricated steel door size 900mm x1800mm , door window loop hole 50 x 50 x 6mm 1200mm length , mild steel angle 35x35x5mm with , steel roofing trough size 2000x613x180mm , steel roofing trough size 1630x613x180mm , ply wood 10 mm thick , steel beam ismb 150 rsj 150 x 75mm 4.6mtr long , bitumen for filling of expansion joint of pcc , quick setting compound , integral water proofing compound , pcc soild block size 400mm x 200 mm x 200 , pbs roll size 20m x 0.90m , hdpe sand bag of size 75x40 cm , oil bound distemper , synthetic enamel pain og , hdpe sheet 150 micron thick , interlocking tiles. 60mm thick pcc , aggregate 20mm , aggregate 40mm , aggregate 63mm , manufactured sand , common burnt clay building bricks 230x115x75mm , polyurethane thinner , cement base paint , hydrophobic poreblocking ingredients , 18w led tube and fitting 4ft , 09 w led bulb , 9 w interter bulb , pvc ceiling rose 2 3 terminal , pvc casing capping square box 4 inch x 4 inch , 6a one way single module flush type modular switch , 1 module concealed metal flush box , white cover plate with frame 1 module , 2 module concealed metal flush box , white cover plate with frame 2 module , cable pvc insulated unsheathed single core 1.5 sqm , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping profile , 25mm pvc casing capping l bend elbow , pvc casing capping t 25mm , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , mcb double pole 230v ac 50 hz 6 amps 10 ka , self adhesive plasticized pvc insulation tape , 16a spn or dp main switches , mcb distribution boards in sheet metal , bricktrowe , drop forged high-grade carbon steel brick hamme , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot forged carbon steel powrah , high quality heavy duty flat painting brush , industrial rubber gloves , aluminium spirit levels 12inch , transparent flexible pvc water leveling tubes , cutting pliers , measuring tape 15 mtr , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium 40mm dia 6 mtr long , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

Central Government / Public Sector

CTN :45591757

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government/Public Sector

CTN :45597071

08 Jul, 2026 NA

Abohar - Punjab

Tender For supply of assy clutch disc , assy clutch cover , clutch release bearing , assy pivot bush front suspension lower arm , assy pivot bush front suspension upper arm , assy ball joint lower , assy ball joint upper , circlip assy ball joint lower , rubber bush front antiroll bar , bush shock observer front , kit gear shifter complete , brake shoe 1st over size rear , wheel mounting nut and bolt , ball joint outer thread outer lh and rh , base plate gs lever top bellow , belt power steering , belt alternator , belt compressor , assy fuel filter , assy fuel filter primary , wd40 rust cleaner , rubber bellow gs lever , master switch power window , door switch power window front lh , motor power window with panel and lifter complete assy rear rh , tail lamp assy rear lh , fog lamp assy with bulb for bumper , side body indicator , reservoir windshield washer and front and rear motor with o ring , bulb capsule type 12v , bulb tube type for cabin light 12v , lt wire 4mm , pull push switch , auto paint as per sample , matt finish black , auto paint silver , clear kit auto , thinner auto , polyester putty , nc putty , putti plate , masking tape , primer auto gray , 2 inch reflector tape white , 2 inch reflector tape red , door lock left front assy , door lock outer handle , foot cover plastic as per sample , glass channel rubber beading , gi coated sheet 8feet x 4feet 20 guage , ms sheet 2feet x 2feet 14 gauge , bolt with washer no 13 as per sample , white silicon tube , rear step accessory , steering mounting cross member , fuel tank cover , gasket cylinder head , gasket cylinder head cover , gasket intake mainifold , gasket exhaust mainifold , o ring came sensor case , o ring water intake , gasket thortool body , gasket oil seal housing rear , gasket oil pump , gasket water pump , o ring spark plug , oil filter assymbly , pistion with gugen pin and lock , piston ring , bigin bearing , main bearing , thrust washer , oil stainner o ring , oil seal front , oil seal rear , bearing input shaft , oil pump assymbly , shaft rocker arm , o ring rocker shaft , seal valve stem , valve intake , valve exhaust , clump rocker arm , spark plug , timing belt , tenssionar timing belt , cover assymbly clutch , disc clutch , bearing clutch relies , engine mounting front , thormstate valve , air filter element , fuel pump assembaly , belt water pump , valve grinding stic small , three annanabond tube 100 gms //bid details 2 / 69

Glass Cladding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector