Latest glass stand Tenders | Government glass stand Tenders

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

Central Government/Public Sector

CTN :45633351

29 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - scrap and unserviceable condemned various types of mix aluminium items such as aluminium spares of tl/ac coaches equipment like aluminium casting coupler, alluminium pipes, alluminium tube light parts ,engine magnet defective,door hings,air filter,air compressor parts, air inlet cover, aluminium bare wire ,alluminium ladder ,dv parts,dm plate parts ,duplex valve,door stoppers, aluminium strip sslv body, ,name plate,blower fan blade air duct cover various types of casing , horn, aluminium window frame ,axial fan , fan blade ,plates aluminium safety strap,ivc body,ivc cover, head light glass frame, ocb fan, mvrf fan, mvsi fan, compressor piston ,tension fitting , suspension fitting vibration jumper and other miscellenous aluminium items in broken and dismenetled condition of sort and sizes with or without m.s.,plastic,rubber,cotton wool,glass etc attachment. (qty approx)

CTN :45574728

23 Jun, 2026 NA

Poonch - Jammu And Kashmir

Tender For annual fixing of rates for supply of workshop material as per rec/is/pdd approved standard and rec drawings, in the jurisdiction of electric division(jpdcl) poonch for the financial year 2026-27 (all the items should be as per latest specifications and drawing adopted/approved by department) - items, se. aluminum winding wire (round) in sizes 12 to 21 swg, dpc aluminum winding wire (round) in sizes from 12 to 21 swg., dpc aluminum strip of sizes for lv winding of distribution transformers 25kva to 250kva, se. aluminum winding wire (round) in sizes 12 to 21 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum winding wire (round) in sizes from 12 to 20 swg.(in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum strip of sizes for lv winding of dist. transformers 25kva to 250kva.( in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg., dpc copper winding wire (round) in sizes 11 to 22 swg., dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva., se copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva. ( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), lv. brass bush rods 12 mm, lv. brass bush rods 20.mm, lv. brass bush rods 25.mm, lv. brass bush rods 30mm, hv. brass bush rods 12 mm, buy back of scrap/old brass bush rods, cork washer for lt bushings big / small, cork washer for ht bushings big / small, lt rubber washers (small m12 & m20) (large m12 & m20), ht rubber washers, ms washers for lt, gutka for ht bush, hv bushing (11kv) 12mm, lv bushing 12mm, lv bushing 20mm, lv bushing 25mm, cotton tape 1 (size), length 25 mtr, nawar tape 1 (size), old cotton sari / cloth, rubberized cork sheet 4mm thick, rubberized cork sheet 5mm thick, cork strip 5mm thick, lethoride paper, electrical grade kraft paper, packing sheet 1 mm, packing sheet 1.5 mm, varnish dr. beck, m seal, fevicol, glass wool sleeves of sizes, backlite tubes, inch inch(i mtr length), packing gutties, manual operated oil pump, transformer oilas per the specifiction of is-335 amended from time to time, ms nuts andd bolts full thread size 1/2 in to 3 in, ms plug and caps 1/2", 3/4", 1", 1.1/4", 1.1/2"confirming to relevant is code amended upto date, film paper 7milsconfirming to relevant is code amended upto date

CTN :45513025

22 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For supply of file cover fs size , dusting cloth large good quality , register 400 pages , register 300 pages , register 200 pages , fevi stick 25 grams , car diary small , correcting fluid whitener pen , colin , paper flag pad coloured , binder clips large medium pack of 12 pcs , yellow envelope , v7 hi tech gel pen blue , v5 hi tech gel pen red , ball pen make reynolds red blue black , pen add gel achiever red blue black , tape transparent 1 inch , packing tape browntransparent 2.5 inch , tape coloured yellow blue green and red small , paper cutter , sticky paper note , fevicol tube 200gram , highlighter set of 6 multicolour , white board marker red blue black , pencil box make apsara natraj pack of 10 , bond paper , drawing sheet all colour a1 size , u clip , stapler kangaroo hd 10 , stapler kangaro hd 45 , kores camlin gum bottle 700 ml , calculator 12 digit , cd rw 700 mb superior quality make hp , room freshner , broom soft , parmanent marker black blue , dak pad , complaint register , complaint slip , carbon sheet , 33 11 kv log book , file tag all size , borosil glass pack of 06 , scale steel , eraser , sharpner , mouse pad , stapler pin small , stapler pin large , t pin , scissors , uniball air roller ball pen , stapler hd 23 s 17 , stapler hd 23 s 17 pin , stapler hd 17mm 5 8 h pin , stapler hd 15mm 23 15 h pin , stapler hd 8mm 23 8 h pin , pen stand , table glass stand for writing , binder card board , sketch pen all colours , pencil colour all colours , spiral binding wire half inches 12 and 5mm , spiral binding wire 1 inches 25mm , spiral binding wire 2 inches 50mm , spiral binding wire 3 inches 75mm , transparent and colour binding sheet pvc , airwicks auto spray machine , airwicks automactic spray refil , phenyl 1 ltr , epson ink pack of 04 colour bcmy , canon pixma 750bk and 751 bcmy set , cartridge for mfm 335x , laser toner cartridge hp 181 , canon npg 59 tonner for mfm , lazer jet print cart 335s , cart samsung l6710 , refrigeration 396 ltr cap , 0.5 kva voltage stabilizere

CTN :45475418

15 Jun, 2026 NA

Batote - Jammu And Kashmir

Tender For rate contract for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for year 2026-27 or till the next year tender is finalized - supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote (per unit rate), super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-19 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-14 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal

CTN :45459805

15 Jun, 2026 NA

Bhaderwah - Jammu And Kashmir

Tender For fixing of rates for supply of workshop material for the fy 2026 27 - super enamel aluminium wire (13 to 22 swg) with scrap , super enamel aluminium wire (13 to 22 swg) with out scrap, , dpc aluminium wire (13 to 22 swg) with scrap, , dpc aluminium wire (13 to 22 swg) with out scrap, , super enamel copper wire (13 to22 swg) with scrap, , super enamel copper wire (13 to22 swg) with out scrap, , dpc copper wire (13 to 22 swg) with scrap, , dpc copper wire (13 to 22 swg) with out scrap, , lt bush rods (m-12), , lt bush rods (m-20), , lt bush rods (m-30), , ht bush rods, , lv bushing (12 mm), , lv bushing (20mm), , lv bushing (32/30 mm), , ht bushing, , butter paper (2 to 3 mil), , lethroide paper (2 to 6 mm), , press boards (5 to 10 mm), , gutties, , rubber washers of sizes, , ltiht washers, , cork sheet (3,5 & 8 mm), , bakelite tubes, , cotton tape, , bovin tape, , insulating varnish, , m.seal, , fevicol, , glass sleeves, , packing sheet, , craft paper, , gum shoes, , aluminium strip of sizes, , pg clamps for 25 kva to 250 kva, , oil seals, , cork sheet, , old sarees, , nut & bolts 2" (16 & 18 no), , bush clamp ht, , cork washers of sizes, , pallet trolley 2.5 mt capacity, , oil testing machine (automatic motorised), , multimeter (waco make), , meggar 2500 mega ohm (waco make), , meggar 5000 mega ohm (waco make), , turn ratin meter (conforming isi standardel

CTN :45459615

16 Jun, 2026 NA

Birsinghpur - Madhya Pradesh

Tender For tent samagri - ceiling 15x15 framing/trussing matting (nylon) 15x38 matting (jute/nylon) 15x3 6x15 tent 10x15 (canvas) durrie (rug) jute matting maharaja carpet bed sheet quilt mattress dunlop mattress quilt cover pillow dunlop pillow tablecloth table pad/cover dunlop chair fiber chair cover fiber chair steel chair sofa (double seater) folding pipe bed maharaja throne/seat maharaja seat/platform gate frame cloth vip gate pipe vedi (ceremonial altar structure) round table stall tent pegs (200 pcs) spatula/ladle wok/kadhai large cooking pot (degchi) aluminum vessel urn/container drum sweetmeat tray griddle (tawa) steel tank bucket jug, water stand, glass stand tea container four-section raita bowl thali (platter)

Central Government/Public Sector

CTN :45429919

12 Jun, 2026 NA

Multi City - Haryana

Tender For auction sale of depot non ferrous scrap - scrap and cond.misc. aluminium scrap of pieces & cut pieces of sheets, chequered sheets,strip,window frame, doors , mouldings, pcs of ladder, aluminium board,aluminium number plate,caps of aluminium tank, aluminium conduit pipes ,etc of sorts & sizes with or w/o attachemnts, as it is, us & ur . qty = 35200.00 kg loc:-material lying at umb side of new carriage godown, beside of new carriage open shed in judw. remarks:-1. removal of fs, steel, rubber, wood and glass or any type of attachments will not be allowed and delivered will be given as it is. 2. delivery will be given by actual weight on electronic wighing scale cap-1000 kg. 3. loading by purchaser.

CTN :45329379

16 Jun, 2026 NA

Bandipora - Jammu And Kashmir

Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c

CTN :45070032

04 Jun, 2026 1.00 Crore

Vidisha - Madhya Pradesh

Tender For providing of tent materials - a-pipe marquee (standard) – per unit (15x15 ft) | a-pipe marquee (rainproof) – per unit (15x30 ft) | large dome (standard) – per sq. ft. | large dome (rainproof) – per sq. ft. | curtain (clean, white) – per unit | curtain (clean, colored) – per unit | bed sheet (clean) – per unit | floor matting (clean, undamaged) – per sq. ft. (5/30) | tarpaulin (clean, undamaged) – per sq. ft. (6/15) | sofa set (standard steel) – per unit | sofa set (vip) – per unit | chair (fiber, good condition) – per unit | wooden divan (takhhat) – per unit (min. size 6x4 ft) | ladder – per unit (min. 3 steps) | table (medium size: 2x4 ft) – per unit | drum (200 liters) – per unit | bucket (20 liters) – per unit | glass (glassware) – per unit | glass (steel) – per unit | jug (capacity: 2 liters) – per unit | glass stand (min. 6-glass capacity) – per unit | entrance gate – per sq. ft. | quilt (clean, undamaged) – per unit (size: 6x3 ft) | mattress (clean, undamaged) – per unit (size: 6x3 ft) | flower pots – per unit | stage platform – per sq. ft. | carpet – per sq. ft. | side wall/partition (kanat) – per sq. ft. | fiber gate – per sq. ft. | chair (vip) – per unit | ceiling drape/drop – per sq. ft. | synthetic carpet – per sq. ft. | tin sheet roofing – per sq. ft. | table roll/covering – per sq. ft. | stage decoration (balloons, bouquets, colored curtains, frills, banners, pots, etc.) – per sq. ft. | tent cooler/evaporator (large size) – per unit | standard air cooler (large size) – per unit | large pedestal fans – per unit | portable ac (2 ton) – per unit | portable ac (4 ton) – per unit | generator (7.5 kw) – per unit | generator (15 kw) – per unit | generator 20 kva generator, 30 kva generator, led rope bulb (9 watts per unit), led light (250 watts per unit), led flood light (300 watts per unit), led flood light (400 watts per unit), led screen tv (per square foot), 55-inch led tv, 65-inch led tv, multi-color led rope light (per meter), amplifier (500 watts per unit), amplifier (3200 watts per unit), mixer (per unit), echo unit (per unit), microphone with cord (per unit), steel dais (per unit), cordless microphone (per unit), horn speaker (40 watts per unit), chair covers, box speaker (12-inch, 200 watts per unit), box speaker (15-inch, 300 watts per unit), recording player, frills.

Glass Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector