Latest glasshouses Tenders | Government glasshouses Tenders

CTN :41082911

22 Jul, 2025 10.10 Crore

Patna - Bihar

Tender For mgsy/25-26/teghra/02 - construction of h.l rcc bridge ( 6 x 18.75 m) over river balan in between pwd road to mujahidpur ( maheshpur- gehuni ghat per balan nadi par pul ) under bhagwanpur block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., levelling course for pile cap , providing and laying of pcc m15 levelling course 100mm thick below the pile cap., providing and laying reinforced cement concrete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 , rcc grade m -35 in pile cap, bored cast in situ piles r.c.c m-35 , pile excluding reinforcement complete as per drawing and technical specification and removal of excavated earth with all lift and lead up to 1200 m, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 54.273+16.411+74.929+ 29.651= 175.264, 6mm thick. steel liner as per drawing and technical specification ., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well. assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 3768.00 for each island., pile load test on single vertical pile in accordance with is:2911(part-iv) 1985, a) initial load test @ 2.5 times load on 1 pile, c) lateral load test, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf qty = 20.810+28.454+1.762+0.313+1.289+1.139 =53.77, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed cement concrete in super-structure as per drawing and technical specificatio,rcc grade m 30, height 5m to 10m, reinforeced cement concrete m30 grade approach slab including reinforcement and formwork complete as per drawing and technical specification, pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, construction of rcc railing of m30 grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as

CTN :41082914

22 Jul, 2025 4.44 Crore

Patna - Bihar

Tender For (nabard)/25-26/rajauli/01 - 1) name of work: construction of hl rcc bridge over khuri river in gram panchayat bakshanda, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concre

State Government

CTN :41087773

25 Jul, 2025 5.68 Lacs

Howrah - West Bengal

Tender For part 54 road side gaurdwall (with stainless pipe railing ) from sukanta ssk to bholanath house under chamrail gram panchayat

State Government

CTN :41059567

26 Jul, 2025 4.89 Lacs

Bhopal - Madhya Pradesh

Tender For removal and refixing of existing pipe railing under pwd bridge constr. sub division-2 bhopal

Central Government/Public Sector

CTN :40521979

25 Jul, 2025 NA

Goa - Goa

Tender For corrigendum : supply of accommodation outfittings - tie down belt with click work and two hooks working load gir , electric can opener , soap dispenser complete with fasteners , 50 l water reservoir with cover , soap box complete with fasteners, stainless steel , semicircular connecting rod with rings 800x800 , chromed double hook , storm rail, chromized l 300 mm , gallery rail post for 1 rail 10 mm with blind hole as end po , gallery rail post for 1 rail 10 mm with blind hole as centre , hanger 2 hook , straight through bracket chrome inner , connecting rod, chromized l 2500 mm d 25 mm , butt bracket chrome inner diameter 25 mm , chromed single-horn hook , acrylic shower tray 800x800, white color , end cap chrome plated for pipe, dia 25 mm , bracket by-300 stainless steel sus304 catalog sugatsune n , elbow liquid soap dispenser jofel 13000 volume 0.5l , toilet paper holder , wall brush for toilet , gallery rail d 10 mm stainless steel l 2500mm n 812.22.602 h , plumbing cuff d110 , chromeclad railing diameter of 11 mm l 1000 mm , railing chrome cap , railing holder chrome plated , passing bracket, chrome inner dia 25 mm , glass holder, chromized complete with fasteners

CTN :41037854

22 Jul, 2025 9.00 Crore

Patna - Bihar

Tender For mgsy/25-26/teghra/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in alapur to pasopur & l021 to pakthaul , ( khijir chak abm kirtoul ke bich balan nadi par pul ) under teghra block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., levelling course for pile cap , providing and laying of pcc m15 levelling course 100mm thick below the pile cap., providing and laying reinforced cement concrete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 , rcc grade m -35 in pile cap, bored cast in situ piles r.c.c m-35 , pile excluding reinforcement complete as per drawing and technical specification and removal of excavated earth with all lift and lead up to 1200 m, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 54.273+16.411+74.929+ 29.651= 175.264, 6mm thick. steel liner as per drawing and technical specification ., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well. assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 3768.00 for each island., pile load test on single vertical pile in accordance with is:2911(part-iv) 1985, a) initial load test @ 2.5 times load on 1 pile, b) routine load test @ 1.5 times load on 2% pile, c) lateral load test, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf qty = 20.810+28.454+1.762+0.313+1.289+1.139 =53.77, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed cement concrete in super-structure as per drawing and technical specificatio,rcc grade m 30, height 5m to 10m, reinforeced cement concrete m30 grade approach slab including reinforcement and formwork complete as per drawing and technical specification, pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, construction of rcc railing of m30 grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space b

CTN :41053489

18 Jul, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of set of following items: 1. aluminium ladder-heavy duty total length - 72 inch, railing 25.4 m m dia corrugated pipe. c section 66.67 mm x31.75 mm x2.91 mm (66.67x2=133mm,total step 5no (126 m m),alloy (temper )-6351- t6 , total height 6 feet and total width outer 21 inch and inner 18 inch , railing tot al length 48 inches 1" dia pipe, u safe hook fitted and top bottom rubber fitted all aluminium are anodized. qty 01 nos 2.stainless steel heavy duty wash basin with soundless coating.size- 24"x18"x10" and 18"x 16" x 10" qty 01 set 3.stainless steel two wash basin stand unit with water storage and waste water storage ta nk with mirror - total length-5 feet ,total height 6 feet, two long body bib cock (durable brass construction: crafted from high-quality brass, the bib cock ensures durability and resistance to corrosion. the robust mat erial choice guarantees a long-lasting and reliable plumbing fixture, suitable for everyday use ). chrome fin ish for aesthetic appeal. stainless steel grade-304 or 202, approx. weight- 50 kg(weight variation (+ ,-)10% , . qty 01 nos [ warranty period: 30 months after the date of delivery ]

CTN :41011322

30 Jul, 2025 NA

Ri Bhoi - Meghalaya

Tender For supply of ply wood commercial as per is-3003 l 8ft w 4ft thickness 12mm bwr , mirror looking l 20 inch w 16 inch with pvc frame , bathroom cabinet mirror pvc , plywood commercial l 7 ft w 3ft thickness 12 mm bwr , kitchen sink 36 inch 18 inch 7 inch stainless steel with drainage board , plywood commercial l 8 ft w 4ft thickness 4 mm , bib cock cp 15 mm , cp health faucet with hook and 1 mtr tube15mm , pillar cock fancy type 15 mm cp , bib cock cp long body 15 mm , cp angle cock 15 mm , bib cock brass 15mm , flushing cistern pvc low level 10 ltr capacity complete , kitchen rack s s l 24 inch w 30inch d 10inch , stop cock brass 15 mm external thread , bitumin felt l 20 mtr w 1 mtr 3 mm thick , float valve pvc 20 mm , pvc pipe 40 mm 3 mtr long , cp tubular towel rail 20 mm dia 600 mm long body , glass shelf straight 20 inch with cp railing 15mm , glass shelf corner l 12inch w 12 inch with cp railing 15mm , bib cock pvc 15mm , single lever basin mixer 6 inch , hydraulic door closer isi marked , sink mixer cp 15mm , stop cock cp 15 mm internal thread , cp soap dish , gate valve brass 15 mm , seat cover plastic for ewc white colour , gi tubing med gde 20 mm is 1239 , pvc waste coupling 50 mm for stainless steel kitchen sink , telescopic channel 12 to 24 inch , waste pipe pvc 32 mm , shower rose cp 15 mm , paint enamelled og in 1 ltrs pack high glossy , paint enamelled grey in 1 ltrs pack high glossy , pvc seat for chair dining , door stoper alumunium double , float valve pvc 25 mm dia , cpvc reducer socket l 20mm w 15mm brass , red oxide primer 1 ltr in pack , curtain rod aluminium silver 20mm , bib cock pvc long body 15mm , fevicol sh 1 kgs pack , aluminium door handle 150mm , aluminium door handle 100mm , cp towel ring round pil4504b , curtain rod holder lattu 20mm silver , toilet paper holder with stainless steel flap 15mm , sliding door bolt alu 300mm rod dia 16 mm , cpvc pipe 15mm , cpvc mta brass 20mm , pvc angle cock 15 mm , paint enamelled black in 1 ltrs pack high glossy , pvc seat and back for chair verandah offrs , tower bolt alu 150 mm dia 12mm , nipple gi 15 mm 6inch long , cpvc socket brass 20mm , cpvc mta brass 15mm , pvc stop cock internal thread 15mm , cpvc pipe 20mm , cpvc fta brass 20mm , cpvc tank connector mt oblique ft 20mm , cpvc ball valve 15mm , helicol door spring 150mm , cpvc plain elbow 20mm , grating pvc 125 mm , pegs alluminium 100 mm , cpvc socket plain 20mm , pvc tank nipple 20mm , cpvc plain tee 20mm , pvc flush bend 40 mm , cpvc plain elbow 15mm , nylon sleeve 35mm pvc wall plug , cpvc socket plain 15mm , cpvc plain tee 15mm , cpvc pipe clip 20mm , cpvc union plain socket 20mm , cpvc fta plastic 20mm , cpvc end cap 20mm , grating cp 100 mm with hole , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

CTN :41011357

30 Jul, 2025 NA

Kamrup - Assam

Tender For supply of cp bathroom glass shelf corner with railing 15mm 10inch 10 inch , cp bathroom glass shelf corner with railing 15mm 12inch 12 inch , bathroom glass shelf straight with c p railing 15mm size16 inch , pvc bend 110 mm 90 degree , cp bib cock 2 in1 size 15mm rubal type , cp bib cock 15 mm , cp bib cock 15mm for sink rubal type , cp bib cock long body 15 mm , cp bib cock long nose 15mm , cp bib cock piller 15mm rubal type , pvc bib cock long body 15mm , pvc connection pipe 15mm 450mm with cp coupling , pvc connection pipe size 15mm 300 mm with cp coupling , pvc connection pipe size 15mm 600 mm with cp coupling , pvc cross tee equal plain 75 mm , pvc cross tee equal 110 mm , distemper oil bound pale cream , distemper washable cream , distemper washable superior white , pvc bend with door 110 mm , pvc bend with door 75 mm , door handle aluminium 100 mm , door handle aluminium 75mm , pvc float valve 15 mm , pvc float valve 25 mm , pvc flushing cistern low level 10 ltr capacity complete , gi tee equal 15 mm isi mark isi mark , gi tee equal 20 mm isi mark isi mark , gi tee reducer 15 20 mm , gi union 15mm isi mark , grating plain 100mm ss allieds type , grating floor drain round 100mm, ss anti cockroach allieds type , hasp stapple alu 100 mm , hasp stapple alu 75 mm , health faucet with hook 1 mtr tube , helical door spring 300mm length , hydraulic door closer isi mark , hydraulic door closer heavy duty isi mark , kitchen sink 36 inch 18 inch stainless steel with drainage board , kitchen sink 45 inch 20 inch stainless steel with drainage board , kitchen stainless steel sinks with single bowl without board size l 24 inch w 18 inch , kitchen steel plate rack l 30 inch w 30 inch , mirror cabinet bathroom pvc 20 inch , mirror looking l 24 inch w 18 inch with pvc frame , paint enamelled aluminiun , paint enamelled black , synthetic enamel og light og paint 1 litre pack , paint enamelled red po , plastic felt weighing 30 kgs roll of 20 mtr long 1 mtr wide , pvc urinal waste pipe 40 750 by 800mm long , pvc waste pipe l 32 w 750 oblique 800 mm long , seat cover plastic for ewc white colour , shower sandwich rain l 6 inch w 6 inch 150mm , single lever sink mixer 15mm square type , sliding door bolt alu 250mm dia 16 mm , sliding door bolt alu 300mm dia 16 mm , sliding door bolt ms 250mm dia 16 mm , sliding door bolt ms 300mm dia 16 mm , cp soap dish , ss holder for curtain rod 25mm 20 guage , cp stop cock 15 mm external thread , cp stop valve angle 15mm rubal type , swan neck center hole basin mixer single hole 15mm rubal type , cp toilet paper holder , toilet seat type-ii wc indian type 580 mm , cp towel ring 200 mm , towel rail 18mm dia 600mm long , pvc towel ring l 900mm w 18mm , tower bolt alu 100 mm dia 12mm , tower bolt alu 125 mm dia 12mm , tower bolt alu 150 mm dia 12mm , cp wall mixer telephonic with divertor 15mm , wash hand basin l 450mm w 300 mm , wash hand basin standard , cp waste coupling fitting 32mm cp economy half and full thread , water storage tank 1000 ltr 3 layer isi mark , wire mesh gi 0 point 56 into 1 point 8 into 15 mtr length , cover for water tank 500 oblique 1000 ltrs , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

State Government

CTN :41032025

23 Jul, 2025 57.47 Lacs

Kolkata - West Bengal

Tender For erection of temporary pandal and platform for block-i, block-ii, diplomat, ec block, reserve block, block-c, police control tower, anti-chamber, electrical room, s.b. room, p.w.d. room, i and ca room and fixing of departmental pipe railing along red

Glasshouses Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government