Latest governor oil pump spares Tenders | Government governor oil pump spares Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

State Government

CTN :45494998

01 Jul, 2026 98.0 Thousand

Multi City - Chhattisgarh

Tender For modification of speed breakers in btg area & base frame grouting of pump foundation of ash slurry pump house & geho pump house at 2x500mw, abvtps cspgcl marwamodification of speed breakers in btg area & base frame grouting of pump foundation of ash slurry pump house & geho pump house at 2x500mw, abvtps cspgcl marwa.

CTN :45498922

20 Jun, 2026 42.97 Lacs

West Kameng - Arunachal Pradesh

Tender For supply of pc stand 12.7 mm dia 7 pay class 11 having ultimate tensilestrength not less than 187 kg per sqmm , sheathing corrugated hdpe pipe , anchorage cone 12 t 13 , bearing plate 12 t 13 , coupler for sheathing pipe , sheathing tape 3 inch thick , profiler for pre stressing cable , multipull pre stressing jack 4000 mg sutaible for 19t13 hydraulic jack with hydraulic pump as per specification enclosed , grouting pump with agitator , drainage spout 210 x 210 mm , strip seal expansion joint 11.40 mtr long , neoprene rubber pad size 900 mm x 580 mm x 10 mm neopene pad 580 x 10 th as per specification enclose

corporations/Associations/Others

CTN :45339670

29 May, 2026 NA

Almora - Uttarakhand

Tender For auction sale of scrap from works / products old & used gi sheet,scrap reinforcement steel ms from works / products smallcut pieces aii sizes,miscellaneous ms scrap,scrap structural steel ms micro sillca silo 15mt cap.,transit mixer drum capacity 6cum make schwing stetter model am 6 qty 1 no,air compressor 2stage 2cyl 15hp,air compressor 2 stage 2 cylinder 15hp 40-60 cfm - 7kg/sqcm qty 1 no.,grouting pump type

Central Government/Public Sector

CTN :45282720

03 Jun, 2026 NA

Sundergarh - Odisha

Tender For supply of carbonaceous hearth grouting material -carbonaceous hearth groutingmaterial paste for blast furnace suitablefor injection through shell wallby pressure pump to arrest gasand flame leakages. shelf lifeminimum 120 days after receiptin rsp with good fluidity.

CTN :44470492

17 Apr, 2026 NA

Parganas - West Bengal

Tender For corrigendum : stabilization of soil layers underneath the proposed additional kulti pump house 2400 cusec by providing poly urethane pu curtain grouting and cement bentonite grouting including soil exploration at kulti, haroa, north 24 parganas - - stabilization of soil layers underneath the proposed additional kulti pump house (2400 cusec) by providing poly urethane (pu) curtain grouting and cement bentonite grouting including soil exploration at kulti, haroa, north 24 parganas.

Central Government/Public Sector

CTN :44736841

17 Apr, 2026 NA

Raigad - Maharashtra

Tender For request of budgetary quote for supply, installation, testing and commissioning of safety circle inside port premises near immigration center 1). signage led screen with metal fabrication support metal fabrication for screen & logo providing and installing branding led circular shape screen, including supply of led display. panel. ms fabrication frame structure with proper support, anchoring and alignment, internal wiring, power supply arrangement, weather protection, testing and commissioning. complete in all respects as per approved design and site requirements. 2). turbine tree 3). fountain providing, supplying, installing. testing and commissioning of 10 nos. 1" foam nozzles with accessories and 16 nos. 12v, 18w underwater rgb led lights. supply and installation of 2 nos. kirloskar brothers limited make 5hp, 440v open well pumps with related fittings. providing and commissioning of 2 nos. electrical control panels with dol starter, elcb and overload protection system. complete upvc astm plumbing inside pond and 150 meters of 0.5 sq.mm x 4 core isi flexible cable for pump and lighting work. 4). mosaic tiles in fountain/pond area 5). providing and fixing mosaic tiles in fountain/pond area, including cleaning and surface preparation, application of waterproof adhesive, proper laying with alignment, epoxy grouting of joints, edge finishing and curing, complete in all respects as per site requirements water proofing providing and applying waterproofing treatment to fountain/pond area, including surface preparation, crack filling, application of approved waterproofing chemical/compound in required coats, curing, and testing for leakage, complete in all respects as per site requirements. 6). light pole providing and erecting metal street light pole of approved height and design, base plate, anchor bolts, internal wiring provision, painting/coating for corrosion protection, and complete installation in all respects as per site requirements. 7). acrylic signage providing and fixing acrylic signage, including laser-cut acrylic letters, uv printing as required, ms frame for support, led backlit provision. proper alignment and mounting, complete in all respects as per approved design and site requirements. 8). rcc work providing and laying rcc slab of m25 grade having thickness 250 mm to 300mm 9). bermuda carpet effect grass with plants providing and executing landscape work including preparation and dressing of soil, supply and plantation of approved shrubs, ornamental plants and trees with manure and watering system, laying of natural/lawn grass with proper leveling and rolling, and decorative pebble work around plants and pathways for aesthetic finish, complete in all respects as per approved layout and site requirements. 10). granite top & wall cladding with required wall & plaster work providing and fixing granite top and wall cladding work, including required surface preparation, necessary wall construction plastering, adhesive fixing, proper alignment, joint filling, edge polishing and finishing. complete in all respects as per approved design and site requirements. 11). electrical lights & points providing, supplying. installing. testing and commissioning of electrical main line including supply and laying of required cables, conduits, distribution connections, and complete wiring for all lights, along with supply of fixtures, fittings, accessories, labour charges and testing, complete in all respects as per site requirements. 12). main line of water supply & return providing, supplying. installing. testing and commissioning of main water supply and return line system, including excavation, supply and laying of approved quality pipes, fittings, valves, joints, supports, connection to pumps/tanks, pressure testing and commissioning, complete in all respects as per site requirements. 13). ss metal logo on top providing and installing 12 feet height ss-(stainless steel) metal revolving logo structure, including

State Government

CTN :44730296

21 Apr, 2026 1.42 Lacs

Korba - Chhattisgarh

Tender For dismantling & grouting of foundation bolts and other allied works in ash slurry pump house at dspm tps, cspgcl korba east

corporations/Associations/Others

CTN :44467320

02 Apr, 2026 17.21 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : maint of rota side wagon tippler e e -repl of main rails and raising of rails , tightening, repl. of all bolts, clits , repl,re fixing of bushes , repl of spur gear assembly , repl of rack pinion , oh of reduction gear box , replacement of sector gear , alignment, grouting of tippling base rollers , repl,repairing of hopper grill , alignment of tipplers , repl,repairing of outboard stool , dismantling,repl of top pivot housing , repl of wooden block , matching of teeth of sector gear , re-fixing lock lever , repl of top stop locking gears assly , side beam fixing of tippler , alignment of motors of wagon tippler , servicing of spray line valve size 4 inch , servicing of spray line valve size 3 inch , servicing of spray line valve size 2 inch , oh of overhead spray pumps , servicing of spray nozzles , lifting, proper fixing of vf tray , changing, fixing of side packing , to provide the patches , repl of plates of vf tray, chutes , removal of foreign , fillings oil in gear box , servocoating,tightening, repl of damaged bolts , greasing of all the nipple point , repl of break shoe liner , repl of main rail beam of wagon tippler , provision of backup in main rail beam , work on central platform , repairing of main rail beam , repairing of rollers of coal spill plates , fab, erection of back support of vf mouth chute , fab., installing of vf tray supports , repl of coal spill plate , repairing of pit platform of main rail beam , repl of damaged beam of vf , repairing of counter balance beam , repairing of mdu base structure , repairing of damaged split spur gear , fab., of mouth piece of vf , erection of new fabricated mouth piece of vf , oh of hoisting system , oh of hopper spray pump, line , provision of hopper liners, in coal hopper of vf , fab. erection of coal hopper partition stool , raising and re-fixing of mouth piece of coal liner chute of vf , repl of back,side plate of mouth piece , to attend the coal leakage from top mouth piece , re-fixing,repositioning of side and back supports , repairing,reposition of side guards of mouth piece , repl of buffer block and buffer pads of counter balance beam , repl of brake drum of thruster brake assly , repl of input,output,intermediate pinion of gear box , fab. and erection of counter balance beam , repairing of wagon tippler plate form by cutting and welding , removing the fallen loaded wagon in pit , inserting the side beam pins in bracket , dismantling,removing the broken shafts of wagon tippler , installation of drive and adjacent intermediate shaft , cutting, fabricated and installation of resting outer rail beam bottom plate

Central Government/Public Sector

CTN :44687368

13 Apr, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1 cement - 3 coarse sand) 12 mm

Governor Oil Pump Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors