Tender For supply of third party inspection of 100 sets of turret electrical equipment kit-b 675- 95- cd3(item lf no: 8000 , third party inspection of 100 sets of hull electrical equipment kit-a 6795 -82- cb6000 (item lf no: 8 , third party inspection of 100 sets of power supply system 675-89-cd2 (item lf no: 8000089003) at firm , third party inpsection of 100 sets of gyro drift indicator (gpk-59) 127 ty part no. z-18/51-19-00- 000 , third party inspection of 100 sets of track assy 675-35-cd9 (item lf no: 80000350 04) at firm premise , third party inspection of 100 sets of filtering / ventilation unit 675 -71-cd6 (item lf no: 800007119 , third party inspection of 100 sets of water radiator 765-03-sb178 (item l f no: 8000003403) at firm p , third party inspection of 100 sets of ejector and air cleaner 675-10-cd2 item lf no: 8000010001) at fi , third party inspection of 100 sets of compressor plant 765-78-cb6 (item lf no: 8000078408) at firm pr , third party inspection of 100 sets of bmp smoke generating equipment 675-84- cd2 (item lf no: 8000084 , third party inspection of 100 sets of hull electrical equipment kit-b 675- 82- cd4 (item lf no: 80000 , third party inspection of 100 sets of nbc filter fat-200m imga 0001 (item lf n o: 8000299423) at firm , third party inspection of 100 sets of slip ring box bky-330-2 675-79-cd3 (item lf no: 8000079001) at , third party inspection of 100 sets of spring 765-33-cd107 (item lf no: 80000334 06) at firm premises , third party inspection of 100 sets of air pressure control unit 765-78-cd533 (i tem lf no: 8000078434 , third party inspection of 100 sets of rh manifold 675-10-cd120 (item l f no: 8000010076) at firm prem , third party inspection of 100 sets of lh manifold 765-10-cd693-01 (ite m lf no: 8000010483) at firm p , third party inspection of 100 sets of cooler oil vehicular 765-03-sb162 (item l f no: 8000003401) at , third party inspection of 100 sets of heater 675-71-cd152 (item lf no: 80000710 05) at firm premises , third party inspection of 100 sets of road wheel with solid rubber tyre 675- 33-c d104 (item lf no: 8 , third party inspection of 100 sets of machining of support roller (item lf no: 8 000033817) at firm p , third party inspection of 100 sets of electric motor mh-1 (item lf no: 80000066 80) at firm premises , third party inspection of 100 sets of filter assembly fluid 765-05-cd291 (item l f no: 8000005823) at , third party inspection of 100 sets of detent lock 675-10-cd114 (item l f no: 8000010114) at firm prem , third party inspection of 100 sets of gasoline centrifugal pump 765-05-cd121 (item lf no: 8000005412) , third party inspection of 100 sets of glow plug 765-06-cd409 (item l f no: 8000006409) at firm premis , third party inspection of 100 sets of reducing valve 765-06-cd308 (item l f no: 8000006472) at firm p , third party inspection of 100 sets of forged blank for hub 765-34-41 (item lf no: 7500034205) at firm , third party inspection of 100 sets of valve 765-84-cd181 (item lf no: 80000844 03) at firm premises a , third party inspection of 100 sets of injector 765-06-cd248 (item lf no: 80000064 41) at firm premise //bid details 2 / 25
Tender For supply of caterpillar engine spare d d - kit water pump rebuild part no 129 3068 , kit turbo charger install part no 449 9582 , water pump rebuild kit part no 1w 7080 , engine turbo charge install kit part no 6v 3736 , water pump rebuild kit part no 1w 7066 , seal o ring part no 5h 6733 , seal o ring part no 6l 8166 , seal o ring part no 6l 8167 , gasket part no 6l 6487 , seal o ring part no 9f 4446 , seal o ring part no 2h 2665 , gasket part no 2n 5693 , gasket part no 4l 7904 , gasket part no 6l 6489 , gasket part no 4n 5795 , gasket part no 4n 1848 , seal o ring part no 109 0076 , seal o ring part no 112 8186 , kit turbo and attaching lines part no 457 6112 , kit turbo install part no 425 0627 , water pump install kit part no 433 9952 , water pump install kit part no 304 7216 , gasket part no 7w 0688 , gasket part no 8n 8100 , gasket part no 4n 9008 , seal o ring part no 109 0078 , seal o ring part no 6v 9027 , gasket part no 107 3758 , kit turbo charger gasket part no 465 7385 , kit gasket single fuel injector part no 6v 9897 , kit turbo charger install part no 434 2472 , water pump install kit part no 519 4471 , water pump rebuild kit part no 222 5152 , kit gasket a part no 289 9211 , gasket part no 230 1072 , seal o ring part no 6v 1454 , seal o ring part no 8c 5209 , seal o ring part no 7m 9909 , gasket part no 153 5484 ) /bid number : gem/2026/b/7428429 * /dated: 09-04-2026 & & / bid document 1 / 35
Tender For supply of plunger and bushing, fuel injector part no 910720478573 247288 , piston 010 part no 1103237 , ring set od 0 010 part no 319751 , pressure valve part no 319542 , roller bearing part no 192599 , repair kit injection pump part no 550137 , rubber hose part no 160670 , repair kit part no 1374083 , belt l 1550mm part no 814208
Tender For supply of beacon light bar led 24 volt tff , glass wind shield tff , head light assy tff , vane pump als , service kit als , sealing plate als , support plate als , assy steering gear box als , tank coolant vehicular 2 point 5 ton , hand brake cable safari , assy injector safari , electromagnetic switch km 311 z tatra , trailer brake valve tatra , front wind shield tatra , sealing ring tatra
Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tenderer’s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tenderer’s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge
Tender For supplying, fitting and fixing of chlorinator (capacity 2kg/hour), with injector, rotameter, booster pump, cylinder trolly, chlorine gas cylinder and its allied works such as pipe line at mla complex campus, dhurwa at wtp under d.w. & s. division, ranchi east, ranchi
Tender For supplying, fitting and fixing of chlorinator (capacity 2kg/hour), with injector, rotameter, booster pump, cylinder trolly, chlorine gas cylinder and its allied works such as pipe line at new high court campus at wtp under d.w. & s. division, ranchi east, ranchi
Tender For supplying, fitting and fixing of chlorinator (capacity 2kg/hour), with injector, rotameter, booster pump, cylinder trolly, chlorine gas cylinder and its allied works such as pipe line at old vidhan sabha campus at wtp under d.w. & s. division, ranchi east, ranchi