Tender For repair to roof, ceiling, flooring, plinth protection, tiles work, brick work, plastering work plumbing and sanitary fittings c2a and c2b area and fafa under ge (east) mathura
Tender For corrigendum : repair of main gates, fixing of damaged tiles & water-proofing at roof of sdf building. (total estimated cost: rs. 2,34,114.86).
Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granitestoneflooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granitestone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl
Tender For repair of flooring tiles, roof, doors in govt, ayurveda clinic building at alkod village in deodurga taluk of raichur district. under 2210 health grant for the year 2026-27
Tender For laying of parking tiles inside, construction of drains for leakage of water, repair of first floor toilet & repair of roof of the building, construction of 4 new toilets, painting of the building & kitchen to post matric boys hostel (pwd camp)(hic- 2311) in sindhanur taluka of raichur district. under bcm for the year 2026-27
Tender For corrigendum : repair maint of damaged and broken roof sheets, floor tiles kota stone, false ceiling, wall panelling at mh namkum and repair/ replacement of sunken floor, sanetary fittings, toilet wall and floors, damage pvc water tank, cleaning water ta
Tender For corrigendum : repair and replacement of roof sheet, tiles, joinery fittings, roof treatment, plastering and construction of medical store room at echs polyclinic mansa under ge (north) bathinda at bathinda mil stn
Tender For supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli - supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli, as per the below details and attached tender document:, supply of fire crete super (medium purity dense castable)packaging type: packet, type: 70% alumina castablechemical: al2o3 (68% to 72%), cao (5.2% to 6.2%), fe2o3 (4.8% to 5.5%)nature of bond: hydraulicmax. service temperature: 1450 deg cel. or morepackaging size: 25 kgstate: dry powderedmake: calderys india refractories ltd / trl krosaki refractories limited / dalmia ocl, supply of refractory mortarproduct class: refractory monolithictype: 50% alumina mortar (coarse)chemical: al2o3 (45% to 50%), fe2o3 (3.8% to 4.8%)nature of bond: chemical / ceramicmax. service temperature: 1500 deg cel. or morepackaging size: 25 kgstate: drymake: calderys india refractories ltd. / trl krosaki refractories limited / dalmia ocl, tiles for boiler roof and bank zone side wall (both sides),size: 300 mm 300 mm 50 mm,quantity: 500 nos. (male female),as per the approved sample (sample collection under the supplier s scope)., repairing / replacement of damaged tiles to new tiles (approx. 300 nos)a. boiler bank zone (both sides)b. boiler roof, dismantling of old refractory & application of new castable refractory masonry work as per below scope of works.the broad scope involves complete dismantling and disposal of old refractory material and application of new castable refractory masonry in specified zones. the scope includes, but is not limited to, the following:dismantling of old refractory: removal of damaged, worn-out, or unserviceable old refractory material (brick, castable, insulation, etc.). manual/mechanical chipping and demolition as per site condition. collection, segregation, and safe disposal of dismantled refractory debris to the designated location inside the plant premises as directed by the engineer-in-charge. cleaning and surface preparation of the exposed area for new refractory lining. inspection and reporting of any damages to anchoring systems or structural parts.installation of new castable refractory: supply of new refractory shall be in hbl scope. surface cleaning and preparation prior to refractory application. mixing of castable using approved method (with pan mixer or mechanical mixer) and maintaining required water ratio. application of castable refractory using shuttering/moulds or free hand as per site requirement. compaction using poker vibrators for ensuring proper density and bonding. curing of refractory as per technical data sheet (tds) of the manufacturer minimum 24-48 hours water curing. removal of shuttering, inspection, and touch-up wherever required. final drying and heating-up (if in scope) under supervision of oem/engineer-in-charge., filling of ceramic wool.