Tender For supply of electro-pneumatic pressurised flushing system for lhb coaches., as per drawing: mmdts 19027 rev. 03 and follow drg. no. mi007851 alt nil for mounting dimensions of control panel of epp fs for lhb coaches., packing instruction: ep flushing system items should be individually wrapped with corrugated paper and collectively packed in wooden box having sufficient strength. it should be e nsured that item should not rub during transportation. transit damage if any shall be at the cost of supplier. a list should be pasted on each box showing purchase order no, pl no., description, dr g / spec no, qty, firm name & address, date of dispatch etc. note : qr code is to be affixed : [ warrant y period: 30 months after the date of delivery ]
Tender For design, supply & installation of complete furnishing of oscillation monito ring system car, as per drawing: mdts-23420 rev. nil, packing instruction: as per standard pa cking. it should be ensured that item should not rub during transportation. the item s hould be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 36 months after the date of delivery ]
Tender For supply of set of fabricated assembly for lhb ac 2 tier flat roof coaches., as per drawi ng: mplscb2tflat version 0, packing instruction: returnable & re-usable metallic pallet ite m should be supplied in returnable & re-usable pallet made of steel. the design of the p allet should be : " water and fire proof. " rust free. " having good strength to weight ratio. " suitable for stacking in several layers, compatible with each other when stack ed. " able to withstand the rough handling of common logistic systems such as fork li fter, cranes etc. " able to facilitate the storing, handling and unloading with minimum labour and time. " having the interior of the pallet lined with suitable material (like fr p ) so as to prevent damage to the item being transported. while stacking the item insid e the pallet, there should be minimum use of disposable packing. " the pallet should ha ve firm's logo for identification. firm should also indicate pl no., description of item o n the pallet. note : 1.for packing the individual item(s), the use of material which are n ot environment friendly such as wood/polyethene/plastic is prohibited, however the en vironment friendly plastic can be used. 2.the item should be packed in such a way that i t should not rub during transportation. the in-transit damage, if any, shall be at cost of the supplier. 3.the design to be got approved by the firm from cde/rcf before initiati ng manufacturing. [ warranty period: 30 months after the date of delivery ]
Tender For design, supply & installation of complete furnishing of oscillation monito ring system car, as per drawing: mdts-23420 rev. nil, packing instruction: as per standard pa cking. it should be ensured that item should not rub during transportation. the item s hould be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 36 months after the date of delivery ]
Tender For supply of roller rubber for flexible coupling to dlw drg.no. tpl-0383-07 alt-k, dlw pl .no.11422350. note: the packing of shelf life item must indicate date of manufacturing& date of expi ry. delivery should be obtained in at least 2/3 instalments. [ warranty period: 30 months after the d ate of delivery ]
Tender For supply of stainless steel battery box arrangment for emu coaches complete with item-67 & packing arrangement as per drg. no em71015, alt.'a' and duly painted as per note-6 as per d rg. no. emu/m-7-1-001, alt. 'j'. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : procurement of consumable item for main turbine for 1x500mw, htps, korba west. - holdtite liquid/cement in 500m or equile , bearing retainer in 250 ml pack [equival , loctite 242 in 250 ml pack (removable th , loctite-565 pst in 50ml pack (thread sea , loctite-406, in 20 gram packing or equil , grinding lapping paste fine for valve gr , paste medium for valve grinding in 400 g , paste coarse for valve grinding in 400 g , emery cloth role of size 75mm width and , emery cloth roll of size 75mm width and , emery cloth roll of size 75mm widthand , emery cloth roll of size 75mm widthand , loctite fix master faststeel putty , metal putty for protection metal surface , loctite 243 threadlocking adhesive , general purpose fast curing flage and ga , loctite rtv silicon gasket sealant 587 , metal putty for protection metal surface , non metallic asbestos cloth size :2000 m , graphite powder , drill bit set 1mm to 10mm (10 pcs), make , allen key set 1.5 mm to 10 mm, make: tap
Tender For as per aap alocation ( id - 110625976) - weight washer, plunger, mark 2 chain, axel, nut & bolt, bearing, top cap, head of mark2 tubewell, adopter, hendle, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) i)15 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)20 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)25 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)32 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)40 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) ii)100 mm, supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i).(a) pvc pipes (dia)(p-13,item-19(iii)) vii)redusing soket 100 x 40, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 40 mm, supplying pvc strainer of approved make with adapter conforming to i.s.12818 specifications.(p-52,item-06) i) 80 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) i) 40 mm, supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(p-53,item-09) ii) 75 mm, supplying, fitting and fixing 65 mm dia. deep well brass cylinder with necessary fittings and accessories.(p-54,item-15), supplying, fitting and fixing 15 mm dia. galv. m.s. connecting rod with sockets.(p-54,item-16), packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the engineer-incharge including cost of all materials labour and equipment complete.(note: initial 6 m. of annular space between the housing pipe and the bore should not be shrouded with pea size gravel to avoid contamination with surface water.)(p-55,item-24), taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (a) upto 20 metre below g.l. (iii) 100 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (i) 40 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (ii) 80 mm dia., taking out pipes of existing tube well including strainer etc. complete for portion of length: (p-56,item-01) (b) beyond 20 metre below g.l. (iii) 100 mm dia., supplying, fitting and fixing brass cylinder parts. (i) brass plunger complete, supplying, fitting and fixing brass cylinder parts. (ii) brass plunger complete without g.i. rod, supplying, fitting and fixing brass cylinder parts. (iii) c.i. top socket, supplying, fitting and fixing brass cylinder parts. (iv) c.i. bottom socket, supplying, fittin
Tender For corrigendum : frp modular toilet (pre assembled) for lhb ac 2t, 3t & composite coaches. as per drawing: mdts-214 rev-12 with addendum as per lno. md46111 dated 16.04.2024 and corrigend um-1 as per lno. md46111 dated 18.04.2024. note-(1)supply of lavatory module for ac coache s should be done in 03 pieces (of walls) which can be fully assembled inside the coach.(2)hei ght of lavatory module must be 2070+10mm.it shall be minimized from top of the lavatory m odule only with reference to applicable lavatory module drawings. , packing instruction: mod ular toilet a wooden frame to be provided at the bottom of each modular toilet. wooden f rame should consist of four supports of size 100x100x150 mm length with strips size 40x100 mm of suitable length. modular toilet ould be suitably fastened with proper packing using item like biodegradable packing of adequate strength. the modular toilet to be covered wi th stitched cover of tarpaulin of good quality.a list should be pasted on each box showin g purchase order no. ,pl no. , description, drg no. /spec no. , qty, firm name & address & dat e of dispatch etc. for loose supply of items of frp modular toilet as per mdts 214 ( latest v ersion) , packing instruction (of latest version) willbe followed : for packing of inside/out side mirror : packing instruction no pi 134 should be followed for packing of attachment wall : packing instruction no pi 184 should be followed.for packing of ceiling flap mountin g , scrapper matting and soap dispenser with cage and other item if any : packing instructio n pi 042 should be followed. [ warranty period: 84 months after the date of delivery ]
Tender For supply of hex head bolt m16x90 high tensile materials and specification as per is:1364(part-1)- 2002,ce-with property class- 10.9 to is:1367(part-3)-2002, coating as per mdts-057, packing ins truction - pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile ca p screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100 249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 mont hs after the date of delivery ]